Abstract:Injection molding is a multiphase process that requires accurate simulation of the filling phase. This is a key element in predicting the complete injection molding cycle. The filling phase presents a complex set of challenges, including migrating melt fronts, multi-phase flow, non-Newtonian fluid dynamics, and intertwined heat transfer. Evolving from 1D to 2D, 2.5D, and 3D techniques, filling simulation research has adapted to capture the intricacies of injection-molded parts. However, the need for accuracy in the characterization of the rheological properties of polymers during filling is still of paramount importance. In order to systematically categorize the numerical methods used to simulate the filling phase of injection molding, this review paper provides a comprehensive summary. Particular emphasis is given to the complex interaction of multiple geometric parameters that significantly influence the dynamic evolution of the filling process. In addition, a spectrum of rheological models is thoroughly and exhaustively explored in the manuscript. These models serve as basic mathematical constructs to help describe the complex viscous behavior of polymers during the filling phase. These models cover a spectrum of complexity and include widely recognized formulations such as the Power-Law, second-order, Herschel–Bulkley, Carreau, Bird–Carreau, and Cross models. The paper presents their implementation to include the temperature-dependent influence on viscosity. In this context, the extensions of these models are explained in detail. These extensions are designed to take into account the dynamic viscosity changes caused by the different thermal conditions during the filling process. An important contribution of this study is the systematic classification of these models. This categorization encompasses both academic research and practical integration into commercial software frameworks. In addition to the theoretical importance of these models, their practical value in overcoming challenges in the field of injection molding is emphasized. By systematically outlining these models within a structured framework, this classification promotes a comprehensive understanding of their intrinsic characteristics and relevance in different scenarios.

Numerical Simulation of Mold Filling of Polymeric Materials with Friction Effect during Hot Embossing Process at Micro Scale

Research on Modeling of Hot Embossing Polymeric Microfluidic Chip

Numerical simulation of filling flow of polymer melt in injection molding

Study on Polymer Flow Profile in Micro Hot Embossing

Simulation Research on Stress of Polymeric Patterns During Micro Hot Embossing

Flow Behavior of Polymer During Micro Hot Embossing

Research on Optimization of the Hot Embossing Process

Optimization of Control Parameters in Micro Hot Embossing

Finite Element Modeling of Polymer Flow During Hot Embossing with Different Mold Structures and Embossing Conditions

Enhanced Polymer Filling and Uniform Shrinkage of Polymer and Mold in A Hot Embossing Process

Research on Heat Transfer for Hot Embossing of Polymeric Microfluidic Chips

Impact of process parameters on the flow behavior and filling accuracy of photoresist in hot embossing for microgroove array

Defects in Micro Hot Embossing Process

Experimental Study on the Hot Embossing Polymer Microfluidic Chip

Effect of process parameters on filling behavior of PMMA in hot embossing

Approaches for Numerical Modeling and Simulation of the Filling Phase in Injection Molding: A Review

Numerical Simulation and Printability Analysis of Fused Deposition Modeling with Dual-Temperature Control

The polymer melt swelling behavior in micro-extrusion process for preparation of continuous carbon fiber reinforced PP prepreg filament

Modeling of large area hot embossing

Numerical Simulation and Process Optimization of a 3D Thin-Walled Polymeric Part Using Injection Compression Molding

In-situ observation on the real-time filling deformation of PMMA into microchannel during hot embossing