Abstract:The magneto-mechanical coupling effect of ferromagnetic materials is the result of macroscopic influence of mechanical properties on magnetic properties under the combined action of stress field and applied magnetic field, which essentially can be attributed to the change of material properties caused by the transformation of microscopic magnetic domain structures. The effect of applied magnetic field is mainly manifested as the change of magnetic moment cluster (direction and size) inside microscopic magnetic domain; The stress field mainly causes the movement and rotation of the domain walls inside the ferromagnetic material, and further causes the change of magnetic moment cluster. Taking Q235 low carbon steel as an example, the effects of tensile stress σ t on some important magnetic parameters of ferromagnetic materials under different excitation intensities (i.e., H 0 ), such as the maximum value of applied magnetic field H max , intrinsic coercive field H cj , hysteresis loss power per unit volume p h and anhysteretic magnetization M an , were obtained by setting macroscopic magneto-mechanical coupling test and fully considering the influence of demagnetizing field H d (The standard ring specimen was used for demagnetization correction of the non-standard strip specimen). Meanwhile, the basic magnetization characteristics of ferromagnetic materials were discussed by introducing the basic magnetization curve F ( H 0 , B an ) and considering the effect of σ t as the equivalent stress field H σ based on the theory of microscopic magnetic domain and the principle of thermodynamic. In the range of 635.4 A/m ≤ H 0 ≤ 928.6 A/m and 0 MPa ≤ σ t ≤ 350 MPa, the theoretical calculation models M an ( H 0 , σ t ) and H σ ( H 0 , σ t ) in the magneto-mechanical coupling effect were obtained, which are in good agreement with the experimental results.

Effect of Stress on Variations in the Magnetic Field of Ferromagnetic Steel under a Constant DC Magnetic Field

Experimental Analysis of the Piezomagnetic Properties of Ferromagnetic Steels Subjected to Cyclic Tensile Stress

Effect of Strain Rate History on the Piezomagnetic Field of Ferromagnetic Steels

Effects of Stress Cycles on Surface Magnetic Field

Effect of Uniaxial Stress on Magnetic Permeability and Magnetic Loss of Low-Carbon Steel in Weak Alternating Magnetic Field

Magnetic Field Properties Caused by Stress Concentration

Dynamic Magnetostrictive Behavior of Ferromagnetic Metal

Magneto-mechanical coupling effect of ferromagnetic materials: Test characteristics and theoretical model

Magnetostriction Varieties and Stress Relief Caused by Pulsed Magnetic Field

STUDY ON THE RELATIONSHIP BETWEEN MAGNETIC FIELD AND RESIDUAL STRESS IN STEEL MATERIALS

Characterization of Magnetic Field in Crack Propagation Stage and Application to Non-Destructive Evaluation

Ferromagnetic Composite with Stress-Insensitive Magnetic Permeability: Compensation of Stress-Induced Anisotropies

Simulation of Magnetic Field Abnormalities Caused by Stress Concentrations

Influence of Varying Tensile Stress on Domain Motion

Magnetic Signals of Stress Concentration Detected in Different Magnetic Environment

Research on the Piezomagnetic Hysteresis of Ferromagnetic Steels under Elastic Cyclic Loadings with Variable Amplitudes

Effect of magnetic field direction during magnetic treatment to reduce residual welding stresses

Magnetic Barkhausen noise analysis of stress in steel

Orientation Effects in Pulsed Magnetic Field Treatment

Exploring Stress-Dependent Impedance Behavior Via Magnetization Dynamics in Amorphous Magnetic Fibers in High Frequency: Experimental and Modeling

Fatigue, Magnetic and Mechanical Hysteresis