Abstract:Local damage or stress concentration that forms during manufacturing and long-term use of ferromagnetic materials has a direct impact on the safety of engineering structures. Thus, accurately identifying damage and stress conditions in these materials is crucial. In this study, martensitic stainless steel, a type of ferromagnetic material, is chosen as the subject for investigation. A weak magnetic detection device is engineered specifically for this purpose, and tests are conducted on the material using this device. The stress value of the material is determined using X-ray diffraction, while magnetic induction intensity is simultaneously recorded with a weak magnetic detection device along the same path. The stress value and magnetic induction intensity are normalized, and the results are analyzed to establish a correlation between weak magnetic signals and stress. Then, a signal processing technique combining blind source separation and eigenvalue recognition is introduced to achieve stress concentration and microdefect location identification. This method is based on the correlation analysis results between weak magnetic signals and stress, as well as supporting evidence from prior studies. The experimental results demonstrate that the location of stress concentration can be accurately determined by identifying the peak or valley value of weak magnetic signals, with an error range of less than 30%. The algorithm of blind source separation and eigenvalue recognition can pinpoint the location of stress concentration and microdefects from the obtained signal. This study presents a novel nondestructive testing method for stress concentration and microdefect identification in ferromagnetic materials.

Simulation of Magnetic Field Abnormalities Caused by Stress Concentrations

Search the Stress Distribution for the Test Magnetic Field

Magnetic Signals of Stress Concentration Detected in Different Magnetic Environment

A numerical simulation method of residual magnetic field signals for evaluating deformation-induced stress concentration in ferromagnetic materials

Research on Influence of Stress Concentration on Metal Magnetic Memory Signal for Stress Evaluation

Magnetic Field Properties Caused by Stress Concentration

Magnetic Field Aberration Induced by Cycle Stress

Distinguishing Stress Concentration or Cracking in Ferromagnetic Material Using Abnormal Magnetic Signals

Magnetic field variation induced by cyclic bending stress

Investigation of Stress Concentration and Microdefect Identification in Ferromagnetic Materials within a Geomagnetic Field

Ferromagnetic Composite with Stress-Insensitive Magnetic Permeability: Compensation of Stress-Induced Anisotropies

A simplified multiscale magneto-mechanical model for magnetic materials

Metal Magnetic Memory Effect Caused by Circle Tensile-Compressive Stress

Exploring Stress-Dependent Impedance Behavior Via Magnetization Dynamics in Amorphous Magnetic Fibers in High Frequency: Experimental and Modeling

Micromagnetic modeling studies on the effects of stress on magnetization reversal and dynamic hysteresis

Study on physical mechanism of metal magnetic memory technique

Stress Concentration Degree Affects Spontaneous Magnetic Signals of Ferromagnetic Steel under Dynamic Tension Load

Research on Magnetic Testing Method of Stress Distribution

A Study on Influence of Magnetic Field on Fracture of Ferromagnetic Material Due to Magneto-Mechanical Coupling Effects

Micromagnetic Simulation of the Effects of the Stress on FeCoSiB Film

Characterization of Magnetic Field in Crack Propagation Stage and Application to Non-Destructive Evaluation