Abstract:This paper proposes a switching bus converter, an efficient and compact hybrid switched-capacitor (SC) voltage regulator, for direct 48 V to Point-of-Load (PoL) power conversion in data centers. The proposed topology merges a 2-to-1 SC front-end with two 8-branch series-capacitor-buck (SCB) modules through two switching buses. Compared to the existing DC-bus-based architecture, the proposed switching-bus-based architecture does not require DC bus capacitors, reduces the number of switches, and ensures complete soft-charging operation. In addition, this paper conducts a comparative performance analysis of different regulated hybrid SC topologies, which reveals that a larger SC conversion ratio is advantageous for achieving higher performance. Through the two-phase operation of the SCB modules, the proposed topology extends the maximum duty ratio and enables a larger SC conversion ratio. A hardware prototype was designed and built with custom two-phase coupled inductors and synchronous bootstrap daughterboards to validate the theoretical potential of the proposed topology. The hardware prototype was tested up to 500-A output current at 1-V output voltage, achieving 93.4% peak system efficiency, 86.1% full-load system efficiency, and 464-W/in$^{3}$ power density. Moreover, the theoretical benefits of a larger SC conversion ratio were experimentally verified with measured performance at different SC conversion ratios.

Hybrid Resonant Converter-Based 8:1 Bus Converter With 3.5kW/in 3 and 98.6%-Efficient For 48V Data-Center Power Systems

Modular Tri-Port High-Power Converter for SRM Based Plug-in Hybrid Electrical Trucks

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

Structural Design of A Five-Level Hybrid Active Npc Converter for High Power Density Motor Drives

Power Decoupling Three-Port Converter with Integrated Transformer

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

High Efficiency High Power Density Cellular 1mhz 380V-12V DCX for Future Data Centers

A High Frequency High Efficiency GaN Based Bi-Directional 48V/12V Converter with PCB Coupled Inductor for Mild Hybrid Vehicle

1.5Kw LLC Resonant Converter with Improved Interleaved Winding Structure and Core Structure

Design of high power density DC bus converter based on llc resonant converter with synchronous rectifier

A High Power Density And Efficiency Bi-Directional Dc/Dc Converter For Electric Vehicles

Design of a 2kW 400/12V High-Output Current DC/DC Converter with Fractional-Turn Planar Transformer for Server power

A Hybrid ZVS Full-Bridge Converter with Transformer Winding Series-Parallel Auto Regulated Current Doubler Rectifier

Modular High Efficiency High Density MHz DCX with Different Output Voltage Adaptation

The Switching Bus Converter: A High-Performance 48-V-to-1-V Architecture with Increased Switched-Capacitor Conversion Ratio

A High Power Density 48V-12V DCX with 3-D PCB Winding Transformer

High-Efficiency High-Density RDCX Modules Cascaded with CHB PFC Stage

A 36-55 V Input 0.6-2.5 V Output Bypass-Assist Series-Capacitor Power Converter with 93.1% Peak Efficiency and 1.5 Ma-5 A Load Range.

An 8A 998A/inch<SUP>3</SUP> 90.2% Peak Efficiency 48V-to-1V DC-DC Converter Adopting On-Chip Switch and GaN Hybrid Power Conversion

High Power Density 48–12 V DCX with 3-D PCB Winding Transformer