Abstract:At present, researchers in the field of pipeline inspection focus on pipe wall defects while neglecting pipeline defects in special situations such as welds. This poses a threat to the safe operation of projects. In this paper, a multi-node fusion and modal projection algorithm of steel pipes based on guided wave technology is proposed. Through an ANSYS numerical simulation, research is conducted to achieve the identification, localization, and quantification of axial cracks on the surface of straight pipelines and internal cracks in circumferential welds. The propagation characteristics and vibration law of ultrasonic guided waves are theoretically solved by the semi-analytical finite element method in the pipeline. The model section is discretized in one-dimensional polar coordinates to obtain the dispersion curve of the steel pipe. The T(0,1) mode, which is modulated by the Hanning window, is selected to simulate the axial crack of the pipeline and the L(0,2) mode to simulate the crack in the weld, and the correctness of the dispersion curve is verified. The results show that the T(0,1) and L(0,2) modes are successfully excited, and they are sensitive to axial and circumferential cracks. The time–frequency diagram of wavelet transform and the time domain diagram of the crack signal of Hilbert transform are used to identify the echo signal. The first wave packet peak point and group velocity are used to locate the crack. The pure signal of the crack is extracted from the simulation data, and the variation law between the reflection coefficient and the circumferential and radial dimensions of the defect is calculated to evaluate the size of the defect. This provides a new and feasible method for steel pipe defect detection.

Guided Wave Ultrasonic Testing for Crack Detection in Polyethylene Pipes: Laboratory Experiments and Numerical Modeling

Detection of internal crack growth in polyethylene pipe using guided wave ultrasonic testing

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Viscoelastic and Damage Model of Polyethylene Pipe Material for Slow Crack Growth Analysis

Research on Phased Array Ultrasonic Technique for Testing Butt Fusion Joint in Polyethylene Pipe

Application of Ultrasonic Guided Waves for Inspection of High Density Polyethylene Pipe Systems

Testbed Hardware Design to Collect Data for Underground PVC Water Pipe Crack Detection: Challenges and Solutions

Simulation of PA-UT Sector Scanning Imaging of Irregular Defects in Polyethylene Pipe Based on Finite Element Analysis

Study on Industrial Computed Tomography Detection and Identification of Inclusion Defects in Thick-Wall Polyethylene Pipe Butt Fusion Joint Within Nuclear Power Plant

Ultrasonic Technique For Testing Cold Welding Of Butt-Fusion Joints In Polyethylene Pipe

NONDESTRUCTIVE TESTING TECHNIQUE FOR CRACKS IN LONG-DISTANCE NATURAL GAS PIPELINES

Location Detection and Numerical Simulation of Guided Wave Defects in Steel Pipes

Non-destructive Evaluation of Spiral-welded Pipes Using Flexural Guided Waves

Ultrasonic Guided Wave Testing Trials for Pipes

Preliminary study on terahertz non-destructive testing for defect detection in hot melt joints of polyethylene pipes

Multiple Cracks Detection in Pipeline Using Damage Index Matrix Based on Piezoceramic Transducer-Enabled Stress Wave Propagation

High-Density Polyethylene Pipe Butt-Fusion Joint Detection via Total Focusing Method and Spatiotemporal Singular Value Decomposition

An Improved Phased Array Ultrasonic Testing Technique for Thick-Wall Polyethylene Pipe Used in Nuclear Power Plant

Ultrasonic Testing of Welded Joints in Polyethylene Pipe

A Comprehensive Review of Polyethylene Pipes: Failure Mechanisms, Performance Models, Inspection Methods, and Repair Solutions

Study on Viscoelastic Behavior During Slow Crack Growth of Medium Density Polyethylene Pipes