Abstract:Proton conductor-based solid oxide fuel cells (SOFCs) and electrolysis cells (SOECs) are receiving increasing attention because of their potential for operation at intermediate temperatures (400 - 600 o C) with high energy efficiency at low cost. In addition, water is formed/provided on the air electrode side of proton-conducting cells, effectively avoiding fuel dilution and nickel oxidation problems associated with oxide-ion conductor-based cells. To date, doped barium cerates-based perovskite oxides are the most widely adopted proton conducting electrolytes due to their desired electrochemical properties. To achieve high proton conductivity, acceptor doping with rare earth elements is a commonly used strategy, which is critical to the formation of protonic defects. Although many trivalent elements have been studied as dopants in the barium cerate family and reasonable electrochemical performance has been demonstrated, the effect of acceptor dopants on other properties of electrolyte materials, especially in single cells under operating conditions, is yet to be studied in detail. In this presentation, we will report our recent progress in the development of a series of acceptor-doped proton-conducting electrolytes. The results reveal that conductivity, transference number, chemical stability, and compatibility with NiO are all closely correlated with dopant size. In particular, the reactivity with NiO is found to strongly affect the properties of the electrolytes and hence cell performance. Among all tested compositions, an optimized electrolyte shows excellent chemical stability and minimal reactivity towards NiO, as predicted from density functional theory (DFT)-based calculations and confirmed by experimental results. In addition, reversible protonic ceramic electrochemical cells (R-PCECs) based on the optimized electrolyte demonstrate exceptional performance and stability, achieving a remarkable peak power density of 1.2 W cm -2 at 600 o C in the fuel cell mode and a high current density of 2.0 A cm -2 at 1.3 V and 600 o C in the steam electrolysis mode while maintaining long-term durability for over 1000 h without obvious degradation.

High-Entropy Proton Conductive Electrolyte for Intermediate Temperature Operation

A protonated brownmillerite electrolyte for superior low-temperature proton conductivity

Medium-entropy Oxide (Ce0.25sm0.25la0.25gd0.25)2o3-8 As Promising Electrolyte for Low-Temperature Solid Oxide Fuel Cells

High Entropy Perovskite Electrolytes for Reversible Protonic Ceramic Electrochemical Cells

High-Entropy Perovskite Electrolyte for Protonic Ceramic Fuel Cells Operating below 600 °C

(Invited) Recent Progress in the Development of Highly Durable and Conductive Proton Conductors for High-Performance Reversible Solid Oxide Cells

ZnO-doped BaZr0.85Y0.15O3−δ proton-conducting electrolytes: Characterization and fabrication of thin films

The Development of Novel Electrolyte Membrane with High Proton Conductivity at Medium Temperatures

A Novel High‐Entropy Perovskite Electrolyte with Improved Proton Conductivity and Stability for Reversible Protonic Ceramic Electrochemical Cells (Adv. Funct. Mater. 17/2024)

Composite electrolyte with proton conductivity for low-temperature solid oxide fuel cell

Elucidation of the Transport Properties of Calcium‐Doped High Entropy Rare Earth Aluminates for Solid Oxide Fuel Cell Applications

(Invited) Advanced Electrode and Electrolyte Materials for Proton Conducting Solid Oxide Electrolysis Cells

Enhanced Proton Transport of β′′-Al 2 O 3 Modified by LiAlO 2 as a High-Performance Electrolyte for a Low-Temperature Solid Oxide Fuel Cell and an Electrolyzer

Recent progress in the structure optimization and development of proton-conducting electrolyte materials for low-temperature solid oxide cells

Cross-linked solid-liquid interfaces enable a fast proton transport in the aluminate heterostructure electrolyte

Interface Engineering to Operate Reversible Protonic Ceramic Electrochemical Cells Below 500 °C

Hybrid Liquid-Crystalline Electrolytes with High-Temperature-Stable Channels for Anhydrous Proton Conduction

Materials Development for Intermediate-Temperature Solid Oxide Electrochemical Devices

Semiconductor Heterostructure (SrFe 0.3 TiO 3 -ZnO) Electrolyte with High Proton Conductivity for Low-Temperature Ceramic Electrochemical Cells

Application of Novel Dy0.06gd0.02er0.02bi1.9o3 Oxide Ion Electrolyte for Intermediate-Temperature Reversible Solid Oxide Cells

Development of high-performance perovskite La(Mg2/3Nb1/3)O3 electrolyte with hybrid protonic/oxide ion conduction for low-temperature solid oxide fuel cells