Abstract:Adjusting hydrocarbon product distributions in the Fischer–Tropsch (FT) synthesis is of notable significance in the context of so-called X-to-liquids (XTL) technologies. While cobalt catalysts are selective to long-chain paraffin precursors for synthetic jet- and diesel-fuels, lighter (C10–) alkane condensates are less valuable for fuel production. Alternatively, iron carbide-based catalysts are suitable for the coproduction of paraffinic waxes alongside liquid (and gaseous) olefin chemicals; however, their activity for the water–gas-shift reaction (WGSR) is notoriously detrimental when hydrogen-rich syngas feeds, for example, derived from (unconventional) natural gas, are to be converted. Herein the roles of pore architecture and oxide promoters of Lewis basic character on CoRu/Al2O3 FT catalysts are systematically addressed, targeting the development of catalysts with unusually high selectivity to liquid olefins. Both alkali and lanthanide oxides lead to a decrease in turnover frequency. The latter, particularly PrOx, prove effective to boost the selectivity to liquid (C5–10) olefins without undesired WGSR activity. In situ CO-FTIR spectroscopy suggests a dual promotion via both electronic modification of surface Co sites and the inhibition of Lewis acidity on the support, which has direct implications for double-bond isomerization reactivity and thus the regioisomery of liquid olefin products. Density functional theory calculations ascribe oxide promotion to an enhanced competitive adsorption of molecular CO versus hydrogen and olefins on oxide-decorated cobalt surfaces, dampening (secondary) olefin hydrogenation, and suggest an exacerbated metal surface carbophilicity to underlie the undesired induction of WGSR activity by strongly electron-donating alkali oxide promoters. Enhanced pore molecular transport within a multimodal meso-macroporous architecture in combination with PrOx as promoter, at an optimal surface loading of 1 Prat nm–2, results in an unconventional product distribution, reconciling benefits intrinsic to Co- and Fe-based FT catalysts, respectively. A chain-growth probability of 0.75, and thus >70 C% selectivity to C5+ products, is achieved alongside lighter hydrocarbon (C5–10) condensates that are significantly enriched in added-value chemicals (67 C%), predominantly α-olefins but also linear alcohols, remarkably with essentially no CO2 side-production (<1%). Such unusual product distributions, integrating precursors for synthetic fuels and liquid platform chemicals, might be desired to diversify the scope and improve the economics of small-scale gas- and biomass-to-liquid processes.This article has not yet been cited by other publications.

Effects of Rare Earth Metal Promotion over Zeolite-Supported Fe–Cu-Based Catalysts on the Light Olefin Production Performance in Fischer–Tropsch Synthesis

Direct Production of Hydrocarbons by Fischer-Tropsch Synthesis Using Newly Designed Catalysts

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Effect of Rare-Earth Promoters on Precipitated Iron-Based Catalysts for Fischer–Tropsch Synthesis

Synergistic Effects of Cerium and Strontium Promoters on Copper‐Modified Iron‐Based Fischer–Tropsch Synthesis Catalysts

Effect of Zr promoter on precipitated iron-based catalysts for high-temperature Fischer-Tropsch synthesis of light olefins

High-temperature Fischer–Tropsch Synthesis over the Li-promoted FeMnMgOx Catalysts

Direct Conversion of Syngas to Light Olefins Through Fischer- Tropsch Synthesis over Fe-Zr Catalysts Modified with Sodium

Fischer–Tropsch synthesis to olefins boosted by MFI zeolite nanosheets

The support effect on the performance of a MOF-derived Co-based nano-catalyst in Fischer Tropsch synthesis

Effect of copper on highly effective Fe-Mn based catalysts during production of light olefins via Fischer-Tropsch process with low CO2 emission

Production of C2–C4 Olefins with Fischer‐Tropsch–Synthesis: The Effect of Cu Promoter Loading on an Fe‐Cu‐K/SiO2 Catalyst

Effects of Ce Addition on Fe–Cu Catalyst for Fischer–Tropsch Synthesis

Enhanced Fischer-Tropsch synthesis performance on fe + ZSM5 bifunctional catalysts

Design of Cobalt Fischer–Tropsch Catalysts for the Combined Production of Liquid Fuels and Olefin Chemicals from Hydrogen-Rich Syngas

Promotional Effects of Multiwalled Carbon Nanotubes on Iron Catalysts for Fischer-Tropsch to Olefins

Recent advances in iron-based catalysts for Fischer–Tropsch to olefins reaction

Enhancing the synergism of Fe3O4 and Fe5C2 to improve the process of CO2 hydrogenation to olefines

Kinetics and Selectivity Study of Fischer–Tropsch Synthesis to C5+ Hydrocarbons: A Review

MOF-Derived Ru1Zr1/Co Dual-Atomic-Site Catalyst with Promoted Performance for Fischer-Tropsch Synthesis.

Copper, potassium promoted iron on metallosilicate and aluminum oxide supports synthesized via a non-hydrolytic sol-gel for Fischer-Tropsch