Abstract:Fischer–Tropsch synthesis (FTS) is a heterogeneously catalyzed polymerization reaction in which H2 and CO reactant molecules are dissociated on the catalyst surface and are associated with forming a wide range of linear and branched hydrocarbon chains. Catalyst development plays a key role in FTS technology. As the world shifts towards renewable and sustainable energy sources, converting syngas into hydrocarbons using Fischer–Tropsch synthesis (FTS) catalysts is crucial. In this work, a series of copper‐modified iron‐based catalysts with cerium and strontium promoters supported on γ‐Alumina as follows were prepared using a wet‐impregnation method: FCA (18Fe/4Cu/γ‐Al2O3), FCCA (18Fe/4Cu/2Ce/γ‐Al2O3), FCSA (18Fe/4Cu/2Sr/γ‐Al2O3), and FCCSA (18Fe/4Cu/1Ce/1Sr/γ‐Al2O3). The phase, structure, and morphology of the catalysts were characterized using X‐ray diffraction (XRD), Brunauer–Emmett–Teller (BET) specific surface area analysis, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), inductively coupled plasma–atomic emission spectrometry (ICP‐AES), hydrogen temperature‐programmed reduction (H2‐TPR), and hydrogen temperature‐programmed desorption (H2‐TPD). The impacts of Ce and Sr, individually and in combination, on the structure, adsorption, reduction, and catalytic performance of the catalysts were evaluated in a fixed bed reactor at 300°C, 2.0‐MPa pressure, a time of stream of 168 h, and an H2/CO ratio of 1. The CO conversion and product selectivity were calculated using gas chromatography results, highlighting the synergistic effect of Ce and Sr promoters on hydrocarbon product distribution. The doubly promoted FCCSA catalyst exhibited a high CO conversion rate of 77.65%, CO2 selectivity of 43.5%, C2‐C4 selectivity of 55.89%, C5+ selectivity of 85.62.0%, and a yield of 43.19%, surpassing FCA, FCCA, and FCSA catalysts. Similar characteristics, CO conversion, and product selectivity were achieved for FCCSA during long‐term 336‐h FTS runs, indicating stability.

Copper, potassium promoted iron on metallosilicate and aluminum oxide supports synthesized via a non-hydrolytic sol-gel for Fischer-Tropsch

Production of C2–C4 Olefins with Fischer‐Tropsch–Synthesis: The Effect of Cu Promoter Loading on an Fe‐Cu‐K/SiO2 Catalyst

Study of Iron-Based Catalysts Performance in Fischer–Tropsch Synthesis: Temperature and Promoter Effect

Effects of Al, Si, Ti, Zr Promoters on Catalytic Performance of Iron-Based Fischer–Tropsch Synthesis Catalysts

The Effect of Copper Addition on the Activity and Stability of Iron-Based CO2 Hydrogenation Catalysts

Impact of Inverse Manganese Promotion on Silica-Supported Cobalt Catalysts for Long-Chain Hydrocarbons via Fischer–Tropsch Synthesis

Synergistic Effects of Cerium and Strontium Promoters on Copper‐Modified Iron‐Based Fischer–Tropsch Synthesis Catalysts

Development of an Iron-Based Fischer—Tropsch Catalyst with High Attrition Resistance and Stability for Industrial Application

Fischer–Tropsch Synthesis: Effect of Activation Gas After Varying Cu Promoter Loading Over K-Promoted Fe-Based Catalyst

Development and Up‐scaling of Iron‐based Catalysts for Fischer‐Tropsch Synthesis of Higher Alcohols

Γ-Fe2o3 As the Precursor of Iron Based Catalyst Prepared by Solid-State Reaction at Room Temperature for Fischer-Tropsch to Olefins

The support effect on the performance of a MOF-derived Co-based nano-catalyst in Fischer Tropsch synthesis

Highly Active and Stable Carbon Nanosheets Supported Iron Oxide for Fischer‐Tropsch to Olefins Synthesis

MOFs-assisted synthesis of robust and efficient cobalt-based Fischer–Tropsch catalysts

Comparison of Preparation Methods of Iron-Based Catalysts for Enhancing Fischer-Tropsch Synthesis Performance

Insights into the influence of support and potassium or sulfur promoter on iron-based Fischer–Tropsch synthesis: understanding the control of catalytic activity, selectivity to lower olefins, and catalyst deactivation

Topotactic Transformation of Metal–Organic Frameworks to Iron-based Catalysts for the Direct Hydrogenation of CO2 to Olefins

Synthesis of SiO2-stabilized FeMn catalysts for catalytic production of liquid fuels: effect of SiO2 position over bimetallic catalysts

Effect of Zr promoter on precipitated iron-based catalysts for high-temperature Fischer-Tropsch synthesis of light olefins

Effect of copper on highly effective Fe-Mn based catalysts during production of light olefins via Fischer-Tropsch process with low CO2 emission

Efficient Fischer-Tropsch to light olefins over iron-based catalyst with low methane selectivity and high olefin/paraffin ratio