Production of C2–C4 Olefins with Fischer‐Tropsch–Synthesis: The Effect of Cu Promoter Loading on an Fe‐Cu‐K/SiO2 Catalyst

Niko Heikkinen,Dorela Dhamo,Ida Uotila,Matti Reinikainen,Roland Dittmeyer

DOI: https://doi.org/10.1002/cctc.202400560

IF: 4.5

2024-06-12

ChemCatChem

Abstract:In this study we focus on the iron‐based catalyst for the production of C2–C4 olefin hydrocarbons via the high‐temperature Fischer‐Tropsch synthesis. Promoters have a significant impact on catalyst stability, activity, and product selectivity. Therefore, we investigated the effect of the Cu promoter in an Fe‐Cu‐K/SiO2 catalyst. We compared the catalyst without Cu to the ones with 1, 2, 3, 4, and 5 wt‐% Cu loading, respectively. The overall catalyst activity increased from 0 to 3 wt‐% Cu loading and started to decrease at 4 and 5 wt‐% Cu loadings. Although overall catalyst activity had an optimum with 3 wt‐% Cu loading, the Cu loading had a negligible effect on product selectivity. However, when compared to a non‐Cu‐promoted catalyst, the Cu addition increased the selectivity towards olefinic C2–C4 hydrocarbons. The Fischer‐Tropsch experiments were performed in a tubular reactor system at 300 °C, 21 bar and H2:CO=2 at different feed volume flow, with hydrogen activation. According to the performed temperature‐programmed dynamic chemisorption analysis, the Cu promoter assisted the iron reduction, and the lower overall activity to 0–2 wt‐% Cu loading might relate to insufficient dissociated H surface species, rather than the availability of C from dissociated CO.

chemistry, physical