Abstract:The pretreatment atmosphere has a significant impact on the performance of iron-based catalysts in carbon dioxide (CO2) hydrogenation. In this study, we investigated the effects of carbon monoxide (CO), syngas (H2/CO), and hydrogen (H2) on the performance of iron-based catalysts during the pretreatment process. To evaluate the structural changes in catalysts after activation and reaction, we analyzed their morphology and particle size, the surface and bulk phase composition, carbon deposition, the desorption of linear α-olefins and reaction intermediates using transmission electron microscope (TEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Mössbauer spectroscopy (MES), temperature-programmed desorption (TPD), and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS). Raman and XPS showed that the H2 pretreatment catalyst caused the absence of iron carbides due to the lack of carbon source, and the CO and syngas pretreatment catalysts promoted the formation of carbon deposits and iron carbides. While the bulk phase of the CO and syngas pretreatment catalyst mainly consists of iron carbide (FeCx), XRD and MES revealed that the bulk phase of the H2 pretreatment catalyst primarily consisted of metallic iron (Fe) and iron oxide (FeOx). The composition of the phase is closely associated with its performance at the initial stage of the reaction. The formation of olefins and C5+ products is more encouraged by CO pretreatment catalysts than by H2 and syngas pretreatment catalysts, according to in situ DRIFTS evidence. Ethylene (C2H4)/propylene (C3H6)-TPD indicates that the CO pretreatment catalyst is more favorable for the desorption of olefins which improves the olefins selectivity. Based on the analysis of the TEM images, H2 pretreatment stimulated particle agglomeration and sintering. In conclusion, the results show that the CO-pretreatment catalyst has higher activity due to the inclusion of more FeOX and Fe3C. In particular, the presence of Fe3C was found to be more favorable for the formation of olefins and C5+ hydrocarbons. Furthermore, carbon deposition was relatively mild and more conducive to maintaining the balance of FeOx/FeCx on the catalyst surface.

Study of Iron-Based Catalysts Performance in Fischer–Tropsch Synthesis: Temperature and Promoter Effect

Comparison of Preparation Methods of Iron-Based Catalysts for Enhancing Fischer-Tropsch Synthesis Performance

The Effect of Hydrophobically Modified Iron Catalysts with Hexadecyltrimethoxysilane on Fischer‐Tropsch Synthesis

Effects of Al, Si, Ti, Zr Promoters on Catalytic Performance of Iron-Based Fischer–Tropsch Synthesis Catalysts

Production of C2–C4 Olefins with Fischer‐Tropsch–Synthesis: The Effect of Cu Promoter Loading on an Fe‐Cu‐K/SiO2 Catalyst

Effect of Preparation Conditions on Precipitated Iron-Based Catalysts for High-Temperature Fischer–Tropsch Synthesis of Light Olefins

Effect of Zr promoter on precipitated iron-based catalysts for high-temperature Fischer-Tropsch synthesis of light olefins

Insights into the influence of support and potassium or sulfur promoter on iron-based Fischer–Tropsch synthesis: understanding the control of catalytic activity, selectivity to lower olefins, and catalyst deactivation

Fischer–Tropsch Synthesis: Effect of Activation Gas After Varying Cu Promoter Loading Over K-Promoted Fe-Based Catalyst

Development of an Iron-Based Fischer—Tropsch Catalyst with High Attrition Resistance and Stability for Industrial Application

Influence of Ammonia and Different Promoters on the Iron‐Based Fischer‐Tropsch Synthesis

Copper, potassium promoted iron on metallosilicate and aluminum oxide supports synthesized via a non-hydrolytic sol-gel for Fischer-Tropsch

Impact of Inverse Manganese Promotion on Silica-Supported Cobalt Catalysts for Long-Chain Hydrocarbons via Fischer–Tropsch Synthesis

Effect of Iron Precursor on Catalytic Performance of Precipitated Iron Catalyst for Fischer–Tropsch Synthesis Reaction

Effect of Rare-Earth Promoters on Precipitated Iron-Based Catalysts for Fischer–Tropsch Synthesis

Γ-Fe2o3 As the Precursor of Iron Based Catalyst Prepared by Solid-State Reaction at Room Temperature for Fischer-Tropsch to Olefins

Synergistic Effects of Cerium and Strontium Promoters on Copper‐Modified Iron‐Based Fischer–Tropsch Synthesis Catalysts

Effects of Different Reductive Agents on Zn-Promoted Iron Oxide Phases in the CO2–Fischer–Tropsch to Linear α-Olefins

Effect of pretreatment conditions on Fe-ZSM-5 properties and performance for Fischer-Tropsch synthesis

Effect of Synthetic Route and Metal Oxide Promoter on Cobalt-Based Catalysts for Fischer–Tropsch Synthesis

Efficient Fischer-Tropsch to light olefins over iron-based catalyst with low methane selectivity and high olefin/paraffin ratio