Abstract:Ruddlesden–Popper La x Sr2–x MnO4−δ materials are interesting symmetric solid oxide fuel cell electrodes due to their good redox stability, mixed ionic and electronic conducting behavior, and thermal expansion that matches well with common electrolytes. In reducing environmentsas at a solid oxide fuel cell anodethe x = 0.5 member, i.e., La0.5Sr1.5MnO4−δ, has a much higher total conductivity than compounds with a different La/Sr ratio, although all those compositions have the same K2NiF4-type I4/mmm structure. The origin of this conductivity difference is not yet known in the literature. Now, a combination of in situ and ex situ 3D electron diffraction, high-resolution imaging, energy-dispersive X-ray analysis, and electron energy-loss spectroscopy has uncovered clear differences between x = 0.25 and x = 0.5 in the pristine structure, as well as in the transformations upon high-temperature reduction. In La0.5Sr1.5MnO4−δ, Ruddlesden–Popper n = 2 layer defects and an amorphous surface layer are present but not in La0.25Sr1.75MnO4−δ. After annealing at 700 °C in 5% H2/Ar, La0.25Sr1.75MnO4−δ transforms to a tetragonal 2D incommensurately modulated structure with modulation vectors q⃗ 1 = 0.2848(1)·( a⃗ * + b⃗ * ) and q⃗ 2 = 0.2848(1)·( a⃗ * – b⃗ * ), whereas La0.5Sr1.5MnO4−δ only partially transforms to an orthorhombic 1D incommensurately modulated structure, with q⃗ = 0.318(2)·( c⃗ * ). Perovskite domains grow at the crystal edge at 700 °C in 5% H2 or vacuum due to the higher La concentration on the surface compared to the bulk, which leads to a different thermodynamic equilibrium. Since it is known that a lower degree of oxygen vacancy ordering and a higher amount of perovskite blocks enhance oxygen mobility, those differences in defect structure and structural transformation upon reduction might all contribute to the higher conductivity of La0.5Sr1.5MnO4−δ in solid oxide fuel cell anode conditions compared to other La/Sr ratios.

Effect of A-Site Substitution on LaMnO3 Perovskite via Sr Ions for Energy Applications

Enhanced Electrochemical Performance of LaMnO3 Nanoparticles by Ca/Sr Doping

La0.75Sr0.25Cr0.5Mn0.5O3 perovskite developed for supercapacitor applications

The effect of partial substitution of noble metal (Pd) at the B site of La0.6Sr0.4FeO3 as a supercapacitor electrode material

Influence of Calcium Doping on Performance of LaMnO3 Supercapacitors

The effect of B – site cation on the supercapacitive properties of LaBO3 (B = Cr, Mn, Fe and Co) porous perovskites

Synthesis, magnetic properties, and electrochemical evaluation of La2NiMnO6 double perovskite as electrode materials for supercapacitor applications

Understanding the Effect of the Valence State of Perovskite B‐Site Ions on Its Oxygen Electrocatalytic Performance

Incommensurate Modulations and Perovskite Growth in La x Sr 2– x MnO 4−δ Affecting Solid Oxide Fuel Cell Conductivity

Properties of nonstoichiometric Pr0.6-xSr0.4MnO3 as the cathodes of SOFCs

La 0.8 Sr 0.2 MnO 3 -Based Perovskite Nanoparticles with the A-Site Deficiency as High Performance Bifunctional Oxygen Catalyst in Alkaline Solution.

Incommensurate Modulations and Perovskite Growth in LaxSr2-xMnO4−δ Affecting Solid Oxide Fuel Cell Conductivity

Synthesis and characterization of Ca doped LaMnO3 as potential anode material for solid oxide electrolysis cells

Narrowing of band gap and decrease in dielectric loss in La1-xSrxMnO3 for x = 0.0, 0.1, and 0.2 manganite nanoparticles

New Electrode of La<sub>0.75</sub>Sr<sub>0.25</sub>Mn<sub>0.5</sub>Cr<sub>0.5-X</sub>Cu<sub>x</sub>O<sub>3-δ</sub> (x=0, 0.05, 0.10, 0.20) for Symmetric Solid Oxide Fuel Cell

Efficient Electrochemical Performance of Sr(OH)2:MnO2 Binary Composites for Solid State Symmetric Supercapacitor

Effect of strontium ion doping on structural, thermal, morphological and electrical properties of a co-doped lanthanum manganite system

Application of SrFeO3 perovskite as electrode material for supercapacitor and investigation of Co-doping effect on the B-site

Combustion-synthesized rGO@LaSrMnO3 electrode for supercapacitor application

Preparation and Properties of Cathode Materials for SOFC

Synthesis And Characterization Of La0.75sr0.25mn0.5cr0.5-Xcuxo3-Delta For Sofc Anode Material