Abstract:Parallel microchannels have been widely used in cooling of compact electronic equipment due to large contact area with liquid and availability of large mass of fluid to carry away heat. However, understanding of flow distribution for microchannel parallel system is still unclear and there still lack of studies give a clear pictures to understand the complex flow features which cause the flow maldistribution. Generally, the geometrical structure of the manifold and micro channels play an important role in flow distribution between micro channels, which might affects the heat and mass transfer efficiency, even the performance of micro exchangers. A practical design of exchanger basically involves the selection of an optimized solution, keeping an optimal balance between gain in heat transfer and pressure drop penalty. A parallel microchannels configurations consisting inlet and outlet rectangular manifold were simulated to study flow distribution among the channels were investigated numerically by using Ansys Fluent 14.5. The numerical results was validated using existing experimental data and showed a similar trend with values 1% higher than experimental data. The influence of inlet/outlet manifold area and inlet/outlet arrangement on flow distribution in channels were carried out in this study. Based on the predicted flow non-uniformity value, 𝜙, Z- type flow arrangement exhibits higher value of 𝜙, which is 8%, followed by U-type, 2.6% and the I-type, 2.49%. Thus, a better uniformity of velocity and temperature distributions can be achieved in I-shape flow arrangement. The behavior of the flow distributions inside channels is due to the vortices that occurred at manifold. Besides comparing the pressure drop for case 1(D1) and case 2(D2), it is worth to mention that, as the area of inlet and outlet manifold decrease by 50%, the pressure drop is increasing about 5%. However, the inlet/outlet area of manifold on velocity and fluid temperature distributions was insignificant.

EFFECT OF THE OUTLET ORIFICE ONTHE COOLING SYSTEM OF HEAT EXCHANGE

Numerical Study on Thermal Performance of a BOG Heat Exchanger in the Inclined Condition

Experimental and statistical analysis on the effects of fouling and effective parameters on performance of heat exchanger

Numerical Simulation the Effect of Inlet-outlet-tube Position on Plate-fin Oil Cooler

Effect of Inlet Flow Maldistribution on the Passage Arrangement Design of Multi-Stream Plate-Fin Heat Exchanger

Effect of Inlet/Outlet types on the Flow Distribution and Heat Transfer in Mini-Channels

Investigation of the effect of using the finned tubes on the performance of shell and tube heat exchanger by 3D modeling

NUMERICAL STUDY OF THE EFFECT OF AREA OF MANIFOLD AND INLET/OUTLET FLOW ARRANGEMENT 0N FLOW DISTRIBUTION IN PARALLEL RECTANGULAR MICROCHANNEL COOLING SYSTEM

The Effect of Heat Exchanger Design on Heat transfer Rate and Temperature Distribution

Presence of a porous medium and the arrangements effects on the performance of an air-cooled heat exchanger: an experimental study for heat transfer and pressure drop

Experimental Study of Inlet-outlet-tube Position of Heat Exchanger Module for Loader

Three-dimensional analysis for optimizing thermo-hydrodynamic performance of heat exchangers with perforated semi-circular inserts

Experimental study of the effect of air inlet angle on the air-side performance for cross-flow finned oval-tube heat exchangers

Numerical Study on Optimization Design of Circuit Arrangement for Tube-Fin Heat Exchanger

Cooling Air Flowrate Distribution Among Parallel Heat Exchangers

Effect of Airflow Non-Uniformities on the Thermal Performance of Water–Air Heat Exchangers—Experimental Study and Analysis

Numerical study on the effect of a parallel to the flow barrier on the flow and heat transfer characteristics of a symmetric sinusoidal channels

INFLUENCE THE CHANNEL PATH ON HYDRO-THERMAL PERFORMANCE IN SERPENTINE MINI- CHANNEL HEAT SINK

THE PROPOSAL OF LAYOUT METHOD FOR COOLING OUTLETS IN A RESIDENTIAL HOUSE WITH THE CONSIDERATION OF SOLAR HEAT GAIN

Flow and Heat Transfer Simulation Analysis of 3D Compact Heat Exchanger

An Implementation Investigation on Hydrothermal Behavior of Heat Exchanger with a Novel Finned Tube Designed