Abstract:Abrasive waterjet peening (AWJP) has become an essential surface treatment technique to improve the surface integrity and mechanical properties of metallic parts due to its high controllability and small thermal influence. However, since existing AWJP processes are based on straight nozzles, they are difficult for complex geometrical profiles and confined spaces treatment, such as dovetail slots. In the present work, a novel deflecting AWJP (DAWJP) process with a designed deflecting nozzle was proposed and verified by experiments on the nickel-based superalloy GH4169. First, the DAWJP's deflecting nozzle was designed based on the AWJP's straight nozzle and deflecting pin with deflection angle. Second, the internal and external flow field distribution and abrasive movement state of deflecting nozzles with different deflection angles (R = 0, 1, 1.5, 2 mm) were studied by using the FLUENT CFD software. Finally, the surface integrity of the GH4169 specimen treated by the proposed DAWJP with an optimized deflecting nozzle was investigated, including microstructure, height difference, surface roughness and microscopic morphology, surface and subsurface microhardness and compressive residual stress (CRS). The results of this study highlighted that the deflecting nozzle with a deflection angle of 1.5 mm could obtain relatively optimized jet flow velocities of the water and abrasive mixed phases. The GH4169 specimen treated by the DAWJP with different processing parameters using the optimized deflection angle formed a plastic deformation depth of 22–51 μm, a height difference between the as-received and DAWJP treated surface of 4–48 μm, and the surface roughness Ra and Sa of 0.199–0.503 μm and 0.535–0.953 μm. The surface microhardness and CRS of the DAWJP treated specimen were approximately 522–573 HV and 773–991 MPa, which is 7.6 %–18.1 % and 209 %–296 % times higher than the as-received specimen, respectively. The work-hardened layer and CRS depth of the near surface of the specimen induced by the DAWJP treatment were approximately 120–180 μm and 112–203 μm. This work presents a novel DAWJP method and investigates its effect on the surface integrity of the GH4169 material, which is expected to have applications in improving the surface integrity and mechanical properties of metallic parts with confined spaces.

Study on the process of abrasive water jet peening for 316L stainless steel

Research on the multilevel energy decrement strategy for abrasive waterjet peening Ti6Al4V

Improving the corrosion and stress corrosion cracking resistance of 316 L stainless steel in high temperature water by water jet cavitation peening

Progress on microstructure and residual stress evolution and corrosion behavior in SP-, LSP- and WJP-treated austenitic stainless steels

Surface Nanocrystallization Mechanism of Additive Manufactured 316L Stainless Steel Via High-Energy Shot Peening

Surface Nanocrystallization and Numerical Modeling of 316L Stainless Steel during Ultrasonic Shot Peening Process

Ultrasonic shot peening of 316L stainless steel – Experimental and analytical approach

Evaluation of Surface Integrity in 18CrNiMo7-6 Steel after Multiple Abrasive Waterjet Peening Process

Relation between roughness and processing conditions of AISI 316L stainless steel treated by ultrasonic shot peening

Pre-mixed abrasive waterjet peening with post-low stress milling process and the effect of process parameters on the surface integrity of TC11 titanium alloy

On femtosecond laser shock peening of stainless steel AISI 316

Surface strengthening in confined spaces: A novel deflecting abrasive waterjet peening for improving the surface integrity of nickel-based superalloys GH4169

Surface Characteristics and Wear Resistance of 316L Stainless Steel after Different Shot Peening Parameters

Study on Surface Roughness and Fatigue Property of Abrasive Waterjet Peened Aluminum Alloy

Experimental and numerical investigation on residual stress of 316L SS treated by different laser shock peening parameters

Energy-Efficient Ultrasonic Shot Peening as Post-treatment for SS316L Fabricated by Laser Powder Bed Fusion

Mechanical Surface Treatments of AISI 304 Stainless Steel: Effects on Surface Microrelief, Residual Stress, and Microstructure

Submerged deflecting abrasive waterjet peening for improving the surface integrity and solid particle erosion resistance of Ti-6Al-4V alloy

Numerical Simulation of Residual Stress Field Induced by Ultrasonic Shot Peening

Shot peening of selective laser-melted SS316L with ultrasonic frequency

Effect of Ultrasonic Shot Peening on Stress Corrosion of 304 Austenitic Stainless Steel