Abstract:Polyacrylonitrile (PAN)–based gel polymer electrolytes (GPEs) consisting of plasticizers ethylene carbonate (EC) and propylene carbonate (PC) and different compositions of tetrabutylammonium iodide (TBAI) salt have been investigated. The GPEs have been characterized by electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV), and X-ray diffraction (XRD) techniques. EIS study shows that the GPE containing 30 wt% TBAI has the lowest bulk impedance, Rb (23 Ω), and highest room temperature ionic conductivity (3.46 × 10−3 S cm−1). Conductivity-temperature relationship in the temperature range studied obeys Arrhenius rule. The Ea value is decreased with TBAI percentage and is the lowest (12.59 kJ/mol) for GPE containing 30 wt% TBAI. From LSV experimental data, the limiting current density (Jlim), apparent diffusion coefficient of triiodide ion (\( {D}_{I_3^{-}}^{\ast } \)), and exchange current density (J0) have been calculated. The highest value for each of these parameters is 5.00 mA cm−2, 6.59 × 10−7 cm2 s−1, and 0.63 mA cm−2, respectively, for the highest conducting GPE. All samples are amorphous. LSV at stainless steel showed that the electrochemical stability window is 2.2 V. The cyclic voltammetry (CV) was performed from 1 to 1000 cycle which showed good electrochemical stability.

Poly(acrylamide-co-acrylic acid)-based gel polymer electrolytes incorporated with sodium iodide for dye-sensitized solar cells (DSSCs)

A polysaccharide extracted from guar beans-based gel polymer electrolytes for efficient dye-sensitized solar cells

Polyvinylidene fluoride‐co‐hexafluoropropylene polymer gel electrolyte‐enabled dye‐sensitized solar cell for sustainable energy

Preparation and Characterization of Novel Polymer-Based Gel Electrolyte for Dye-Sensitized Solar Cells Based on poly(vinylidene fluoride-co-hexafluoropropylene) and poly(acrylonitrile-co-butadiene) or poly(dimethylsiloxane) bis(3-aminopropyl) Copolymers

Efficiency enhancement of dye-sensitized solar cell with PVdF-HFP:MPII:NaI quasi-solid-state electrolyte

Presence of NaI in PEO/PVdF-HFP blend based gel polymer electrolytes for fabrication of dye-sensitized solar cells

Polyacrylonitrile-based gel polymer electrolytes for dye-sensitized solar cells: a review

Enhanced efficiency in dye-sensitized solar cell based on zinc oxide-modified poly(ethylene oxide) gel electrolyte

Efficiency enhancement in dye-sensitized solar cells with a novel PAN-based gel polymer electrolyte with ternary iodides

Electrochemical and structural characterization of polyacrylonitrile (PAN)–based gel polymer electrolytes blended with tetrabutylammonium iodide for possible application in dye-sensitized solar cells

Bio-based chitosan/PVdF-HFP polymer-blend for quasi-solid state electrolyte dye-sensitized solar cells

An Ionic Liquid-Based Polymer with Pi-Stacked Structure As All-Solid-State Electrolyte for Efficient Dye-Sensitized Solar Cells

Effects of different iodide salts on the electrical and electrochemical properties of hybrid biopolymer electrolytes for dye-sensitized solar cells application

A Novel Composite Polymer Electrolyte Containing Room-Temperature Ionic Liquids and Heteropolyacids for Dye-Sensitized Solar Cells

Gel polymer electrolytes based on polyacrylonitrile and a novel quaternary ammonium salt for dye-sensitized solar cells

Poly (ethyl methacrylate) mixed ionic liquid-trifluoromethanesulfonic chloride for electric double layer capacitor and dye-sensitized solar cells

Mixed cation effect and iodide ion conductivity in electrolytes for dye sensitized solar cells

Dye-sensitized Solar Cells Employing Polymers

A Review on Gel Polymer Electrolytes for Dye-Sensitized Solar Cells

Synergistic Effects of Polyvinylidene fluoride (PVDF) and Polyvinylpyrrolidone ( PVP ) Blends in Gel Electrolytes for efficient and Long-Term Stability in Dye-Sensitized Solar Cells (DSSCs)

High-efficiency dye-sensitized solar cells fabricated with electrospun PVdF-HFP polymer nanofibre-based gel electrolytes