Wan Zaireen Nisa Yahya,Wong Theen Meng,Mehboob Khatani,Adel Eskandar Samsudin,Norani Muti Mohamed
Abstract:Abstract Dye-sensitized solar cells (DSSCs) have emerged to become one of the most promising alternatives to conventional solar cells. However, long-term stability and light-to-energy conversion efficiency of the electrolyte in DSSCs are the main challenges in the commercial use of DSSCs. Current liquid electrolytes in DSSCs allow achieving high power conversion efficiency, but they still suffer from many disadvantages such as solvent leakage, corrosion and high volatility. Quasi-solid state electrolytes have therefore been developed in order to curb these problems. A novel polymer electrolyte composed of biobased polymer chitosan, poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP), 1-methyl-3-propylimidazolium iodide ionic liquid and iodide/tri-iodide redox salts in various compositions is proposed in this study as a quasi-solid state electrolyte. Fourier transform infrared microscopy (FTIR) studies on the polymer electrolyte have shown interactions between the redox salt and the polymer blend. The quasi-solid state electrolyte tested in DSSCs with an optimised weight ratio of PVdF-HFP:chitosan (6:1) with ionic liquid electrolyte PMII/KI/I 2 has shown the highest power conversion efficiencies of 1.23% with ionic conductivity of 5.367×10 −4 S·cm −1 demonstrating the potential of using sustainable bio-based chitosan polymers in DSSCs applications.
What problem does this paper attempt to address?
The problems that this paper attempts to solve are the long - term stability of the electrolyte and the light - energy conversion efficiency in dye - sensitized solar cells (DSSCs). Specifically, although traditional liquid electrolytes can achieve relatively high power - conversion efficiencies, they also have disadvantages such as solvent leakage, corrosion, and high volatility, which limit the commercial applications of DSSCs. Therefore, researchers have developed quasi - solid - state electrolytes to overcome these challenges.
### Research Background and Problem Description
1. **Advantages and Challenges of Dye - sensitized Solar Cells (DSSCs)**
- As a promising alternative to traditional solar cells, DSSCs have the advantages of low cost, simple preparation, good performance, and environmental friendliness.
- However, their light - energy conversion efficiency and long - term stability are still major obstacles to commercial applications.
2. **Limitations of Liquid Electrolytes**
- Although liquid electrolytes can achieve relatively high power - conversion efficiencies, they have problems such as solvent leakage, corrosion, and high volatility, which affect the durability and sealing of DSSCs.
3. **Proposal of Quasi - Solid - State Electrolytes**
- To overcome the limitations of liquid electrolytes, researchers have proposed the use of quasi - solid - state electrolytes. This type of electrolyte can be achieved by adding gelling agents, polymer matrices, or conductive organic materials.
### Research Objectives
The objective of this research is to develop a new type of quasi - solid - state electrolyte composed of the bio - based polymer chitosan and polyvinylidene fluoride - hexafluoropropylene copolymer (PVdF - HFP), and add 1 - methyl - 3 - propylimidazolium iodide (PMII) ionic liquid and iodine/triiodide redox salts. By optimizing the ratio of PVdF - HFP to chitosan, study its influence on electrochemical and photovoltaic properties.
### Main Research Contents
1. **Material Synthesis and Characterization**
- Polymer electrolytes with different ratios of PVdF - HFP and chitosan were prepared.
- Fourier - transform infrared spectroscopy (FTIR) was used to study the interactions between the polymers and the redox salts.
2. **Electrochemical Performance Testing**
- The ionic conductivity of the electrolyte was measured by electrochemical impedance spectroscopy (EIS), and the diffusion coefficient and recombination rate constant were analyzed.
3. **Photovoltaic Performance Evaluation**
- Different ratios of quasi - solid - state electrolytes were applied to DSSCs to test their photocurrent density, open - circuit voltage, fill factor, and conversion efficiency.
### Key Results
- When the optimal PVdF - HFP:chitosan weight ratio was 6:1, the highest power - conversion efficiency of 1.23% was obtained, and the ionic conductivity was 5.367 × 10^-4 S·cm^-1.
- FTIR studies showed that there were interactions between the redox salts and the polymer matrix, confirming the formation of the composite material.
Through these studies, this paper demonstrates the potential of using sustainable bio - based chitosan polymers in DSSCs applications and provides experimental basis for further optimizing quasi - solid - state electrolytes.