Abstract:Dye sensitised solar cells (DSCs) based on mesoporous nanostructured TiO2 have attracted attention as an alternative to silicon photovoltaics. However, the use of a liquid electrolyte causes practical problems of leakages and its volatilisation, desorption and photodegradation of the dye, corrosion of the platinum secondary electrode and ineffective sealing of cells for long term applications in solar panels. Some of the attempts to solve this problem include the use of polymer electrolytes, gelling agents and both organic and inorganic hole conductors. A common feature of all such alternatives is the notable reduction in efficiency of the resultant solar cells primarily, due to the lower mobility of the iodide species through the solid or quasi-solid medium and imperfect wetting of pores with the electrolyte. The conversion efficiencies with the gel polymer electrolytes typically do not exceed 5%, but even at low efficiencies, these cells may become viable alternatives to the organic liquid containing Gratzel type cells due to improved stability and better sealing ability. The dyes are less liable to undergo photocorrosion and desorption, and the corrosion effects on the Pt electrode are lower. Some commonly used polymer electrolytes include poly(ethylene oxide), poly(propylene oxide), poly(acrylonitrile), poly(methyl methacrylate), poly(vinyl chloride) and poly(vinylidene fluoride). Plasticisers employed are ethylene carbonate, propylene carbonate, dimethyl carbonate, γ-butyl lactone and diethylene carbonate. In addition, inert fillers, such as TiO2, SiO2, etc., are added to enhance ionic conductivity and stability at the interface with electrodes. These self-sealing gel polymer electrolytes have reported efficiencies of about 2–5%. Recently, the poly(acrylonitrile) based gel polymer electrolytes are reported to give an efficiency of 7·5% for the TiO2/Ru-N719 system under AM 1·5 illumination. Incorporation of TiO2 nanoparticles increases the efficiency of a DSC employing poly(vinylidene fluoride-co-hexafluoropropylene) from 5·72 to 7·18% where the standard liquid electrolyte gave an efficiency of 7·01%. The nanoparticles here are assumed to reduce recombination at the interface of dyed electrode/electrolyte. This review will cover only the application of gel polymer electrolytes for dye sensitised TiO2 systems in quasi-solid state solar cells and will not cover the closely related areas of gelated electrolytes where the standard liquid electrolyte is gelated with gelling agents and conducting polymers used as hole conductors.

Dye-sensitized Solar Cells Employing Polymers

Polycomponent Electrocatalysts for I‐Mediated Dye‐Sensitized Solar Cells

Improved Interfacial Electron Dynamics with Block Poly(4-vinylpyridine)-Poly(styrene) Polymers for Efficient and Long-Lasting Dye-Sensitized Solar Cells

A Review: Quasi-solid State Polymer Electrolytes for Dye-sensitized Solar Cell

Enhanced photovoltaic performances of quasi-solid-state dye-sensitized solar cells using a novel conducting gel electrolyte

Gel polymer electrolytes for dye sensitised solar cells: a review

Electrochemical Polymerization-Fabricated Several Triphenylamine–Carbazolyl-Based Polymers with Improved Short-Circuit Current and High Adsorption Stability in Dye-Sensitized Solar Cells

Review—Polyethylene Oxide-Based Nanocomposites as Polymer Electrolytes for Dye-Sensitized Solar Cell Application

Photoelectrochemical Polymerization for Solid‐State Dye‐Sensitized Solar Cells

Bio-based chitosan/PVdF-HFP polymer-blend for quasi-solid state electrolyte dye-sensitized solar cells

Electrochemical Properties of Metal Salts Polymer Electrolyte for DSSC

Preparation and Characterization of Novel Polymer-Based Gel Electrolyte for Dye-Sensitized Solar Cells Based on poly(vinylidene fluoride-co-hexafluoropropylene) and poly(acrylonitrile-co-butadiene) or poly(dimethylsiloxane) bis(3-aminopropyl) Copolymers

Facile Synthesis of Poly(3,4-Ethylenedioxythiophene) Film Via Solid-State Polymerization As High-Performance Pt-free Counter Electrodes for Plastic Dye-Sensitized Solar Cells.

A Review on Gel Polymer Electrolytes for Dye-Sensitized Solar Cells

Optimization of Polysulfone/Polyethylene Glycol (PSf/PEG) Casted Solution Composition as a Membrane Electrolyte in a Dye-Sensitized Solar Cell (DSSC)

Composite Electrolytes Based on Poly(ethylene Oxide) and Binary Ionic Liquids for Dye-Sensitized Solar Cells

Increased Power Conversion Efficiency of Dye-Sensitized Solar Cells with Counter Electrodes Based on Porous Polypyrrole

Quasi-solid-state dye-sensitized solar cells on plastic substrates

Poly(ethylene glycol)/poly(vinylidene) fluoride/TiO2 nanoparticle composite for sandwiched solid-state dye-sensitized solar cells

Synthesis and Characterization of Conjugated Polymers with Main-Chain Donors and Pendent Acceptors for Dye-Sensitized Solar Cells

Quasi-Solid-State Dye-Sensitized Solar Cells Prepared With A D102 Sensitizer And A Polymer Electrolyte