Abstract:Porous zinc oxide (ZnO) nanosheet (NS) arrays constructed by connected nanocrystallites were built on weaved metal wire (WMW) via hydrothermal treatment followed by calcination, and used as photoanodes for flexible dye-sensitized solar cells (DSSCs). An overall light-to-electricity conversion efficiency (h) of 2.70% was achieved for the DSSC under 100 mW cm(-2) illumination, and this h was found to be much higher than that of the DSSC with ZnO nanowire (NW) as the photoanode (0.71%). The far superior performance of the DSSC with ZnO-NS is essentially attributed to: (i) the film consisting of nanosheets with interconnected nanocrystallites can allow relatively direct pathways for the transportation of electrons as the nanosheets have a regular structure with the sheets being oriented to the electrode; (ii) the nanocrystallites assembly and porous character of the nanosheets can provide a large surface area for dye adsorption, which is in favor of enhancing the light absorption and the light propagation; (iii) the nanopores embedded in the nanosheet can act as "branch lines" for more efficient electrolyte diffusion into the interstice of the densely packed nanosheets in the array. A further improvement in the efficiency of the DSSC with ZnO-NS was achieved through the atomic layer deposition (ALD) of an ultrathin titanium oxide (TiO2) layer onto the ZnO-NS layer. The larger charge transfer resistance along with the introduction of a TiO2 shell is thought to reduce the surface recombination and thus contribute to the increase in the open circuit voltage (V-oc) of the DSCs and higher conversion efficiency (3.09%).

A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

Novel design for flexible quasi-solid-state dye-sensitized solar cells based on heat-resistant glass paper

Transparent, Double-Sided, Ito-Free, Flexible Dye-Sensitized Solar Cells Based On Metal Wire/Zno Nanowire Arrays

ZnO nanotube-based dye-sensitized solar cell and its application in self-powered devices.

A Dual Function of High Efficiency Quasi-Solid-state Flexible Dye-Sensitized Solar Cell Based on Conductive Polymer Integrated into Poly (acrylic Acid-Co-carbon Nanotubes) Gel Electrolyte

Single-crystalline Porous ZnO Nanosheet Frameworks for Efficient Fully Flexible Dye-Sensitized Solar Cells

Stainless Steel Mesh-Based Flexible Quasi-Solid Dye-Sensitized Solar Cells

Solid-State Dye-Sensitized Solar Cell Based on Semiconducting Nanomaterials

High-Efficiency And Stable Quasi-Solid-State Dye-Sensitized Solar Cell Based On Low Molecular Mass Organogelator Electrolyte

A quasi-solid-state dye-sensitized solar cell based on the stable polymer-grafted nanoparticle composite electrolyte

Highly-flexible, low-cost, all stainless steel mesh-based dye-sensitized solar cells

Research Progress of Solid State Dye-sensitized TiO2 Nanocrystalline Thin Film Solar Cells

High-Performance and Stable Gel-State Dye-Sensitized Solar Cells Using Anodic TiO2 Nanotube Arrays and Polymer-Based Gel Electrolytes

Recent Development of Dye-Sensitized Solar Cells Based on Flexible Substrates

Flexible dye-sensitized solar cells assisted with lead-free perovskite halide

Porous ZnO Nanosheet Arrays Constructed on Weaved Metal Wire for Flexible Dye-Sensitized Solar Cells.

Fiber-shaped all-solid state dye sensitized solar cell with remarkably enhanced performance via substrate surface engineering and TiO2 film modification

High-Efficiency Solid-State Dye-Sensitized Solar Cells Based on Tio2-Coated Zno Nanowire Arrays

All-solid-state electrolytes consisting of ionic liquid and carbon black for efficient dye-sensitized solar cells

Quasi-Solid-State Dye-Sensitized Solar Cells Prepared With A D102 Sensitizer And A Polymer Electrolyte

An Efficient DSSC Based on ZnO Nanowire Photo-Anodes and a New D-π-A Organic Dye