Abstract:Even though active noise control (ANC) technique has been widely investigated and proven its efficiency for low-frequency vehicle interior noise control, current applications are mainly for the steady noise process such as powertrain noise and uniform road noise. When impulsive road disturbances due to road bumps or potholes are present, they may hinder the performance of the ANC system. One of the reasons is that the prevalent ANC algorithm, namely the filtered- x least mean square (FxLMS) algorithm, has been developed assuming that the signals follow the normal distribution. The impact road noise due to a sudden impact may exhibit a non-Gaussian characteristic. Hence, the FxLMS algorithm may not be appropriate for controlling this type of impulsive noise. In this study, a robust ANC system configured with a modified FxLMS (MFxLMS) algorithm by incorporating thresholds on reference and error signal paths is proposed for impact road noise control. To aid in the control system design, the spectral-based substructuring technique is implemented to develop a coupled vehicle system model to simulate the impulsive interior acoustic response due to road unevenness. The vehicle passenger compartment is simplified as a 3-dimensional flexible-panel backed cavity model, which is coupled with the tire-wheel system modeled as a flexible ring element and rigid wheel through the suspension system represented by a spring-damper model. The tire-road interaction is modeled as a set of flexible elements with certain stiffness over a half-cosine wave road bump. Numerical simulation results show that the proposed ANC system can effectively deal with the interior impact road noise without instability issue that may occur in the existing FxLMS algorithm. In fact, results show that approximately 8 dB reductions are achieved at the driver's ear position. (C) 2015 Institute of Noise Control Engineering.

Auralization of road noise CAE simulation results for interactive sound quality evaluations

Application of Acoustic Transfer Vector Algorithm on Acoustic Radiation for Drive Axle of Automobile

Enhancement of Full-Vehicle Road Noise Simulation Including Detailed Road Surface and Innovative Tire Modeling

Describing Road Booming Noise with a Hybrid Simulation Model Using a Time Segmentation of the Excitation Load Approach

Evaluation of Road-Induced Interior Noise of Vehicle Based on Virtual Experiment

Study and Development of Subjective Evaluation of Inner Noise Quality and Improvement

A Feedback Active Control Approach to Road Noise Based on a Single Microphone Sensor to Improve Automotive Cabin Sound Comfort

A human ear simulation model for noise classification

Prediction and Optimization of Full-Vehicle Road Noise Based on Random Response Analysis

Analysis and Optimization of Low-Speed Road Noise in Electric Vehicles

A Study on Multi-Channel Active Sound Profiling Algorithm for Hybrid Control of Broadband and Narrowband Noise Inside Vehicles

Auralization of electric vehicles for the perceptual evaluation of acoustic vehicle alerting systems

Simulation and Analysis of Vehicle Inner Noise Excited by Roughness Based on Acoustic Transfer Vector Method

Active control of road noise considering the vibro-acoustic transfer path of a passenger car

Research on optimization control of vehicle road noise performance

Introduction to Ansys NVH solutions focusing on the Vibro Acoustics

A digital simulation method of urban road traffic noise

Numerical modeling and active noise control of impact road noise inside a vehicle compartment

Statistical Energy Analysis for Road Noise Simulation

Active control of vehicle interior road noise using nfxlms algorithm with two loudspeakers

Sound Quality Evaluation of Automobile Interior Noise under Transient and Steady-State Running Conditions