Abstract:The work aims to study the preparation method of Flaky nano-MoS2 and its tribological applications in oil lubrication. Flaky nano-MoS2 was prepared by hydrothermal reaction at 220 °C with sodium molybdate and thiourea as raw materials. The chemical compositions, crystal structure and other physicochemical properties of the nano-sheets were characterized by FT-IR, XRD, HRTEM and EDS, respectively. After the surface was coated and modified by silane coupling agent (KH570), KH-MoS2 was dispersed into the paraffin oil through ultrasonic treatment to form the lubrication oil disperse system. Further, the ·130· 表面技术 2018 年 8 月 tribological properties of nano-sheets in the composite lubrication oil as additives were tested on a ball-on-disk tribometer. The theoretical model was established according to the results of SEM, EDS, etc. And the tribological properties were investigated. The flaky nano-MoS2 with the sizes of 30~100 nm was prepared. The tribological performance of paraffin oil could be significantly improved after the surface-coated MoS2 was added. When the additive amount of MoS2 was 1.0 wt%, the coefficient of friction (COF) was 53.4% lower than that of pure paraffin oil and the diameter of the wear tracks was 41.1% less than that of pure paraffin oil. Besides, obvious furrows could be observed on the surface of the disk when pure paraffin oil was used as lubricant. The width of wear track with nano-oil as lubricant decreased by 43.9% to the maximum extent. KH-MoS2 can flow into the frictional contact interface along with the lubricant and form a deposited film on the contact region by being attached to the friction surface as the interface slides relatively to achieve excellent friction-reducing and wear-resisting effect.

Construction and tribological properties of 2D heterojunction of g-C3N4/MoS2 nanocomposites

2D/2D HETEROSTRUCTURE OF FLOWER-LIKE MoS2 NANOSPHERES ANCHORED ON g-C3N4 NANOSHEETS FOR REDUCING FRICTION AND WEAR

Synthesis and Tribological Properties of the Novel Tubular MoS2/GR Nanocomposite

Tribological properties of MoS2 coating for ultra-long wear-life and low coefficient of friction combined with additive g-C3N4 in air

Synergistic lubrication of few-layer Ti3C2Tx/MoS2 heterojunction as a lubricant additive

A novel 2D/2D MoS2/CeO2 nanohybrid and its lubricating mechanism in green rapeseed oil

Investigation of tribological behavior of MOFs/g-C 3 N 4 nanocomposite for insight into effect of flake-on-sheet and ball-on-sheet nanostructure

Molybdenum Disulfide-Based Nanocomposites as Super Oil Nano-Additive with Enhanced Tribological and Rheological Properties

The Synthesis of MoS2 Particles with Different Morphologies for Tribological Applications

One-pot synthesis of reduced graphene oxide/molybdenum disulfide heterostructures with intrinsic incommensurateness for enhanced lubricating properties

The Synthesis of Two-Dimensional MoS(2 )nanosheets with Enhanced Tribological Properties As Oil Additives

Preparation of Flaky Nano-MoS2 and Its Anti-friction and Anti-wear Performance in Oil

Investigation of Tribological Properties of Hydrothermally Synthesized Halloysite Composites with Carbon, MoS2 and CuO

Tribological Performances of MoS2/C60 Nanocomposite As Lubricating Additive in Dioctyl Sebacate

Tribological properties of MoS2 modified carbon fabric wet friction materials

Synergistic Effects of Carbon Nanotube/Nano-MoS2 Hybrid on Tribological Performance of Polyimide Nanocomposite Films

Tribological Properties of Molybdenum Disulfide and Helical Carbon Nanotube Modified Epoxy Resin

The Application of Nano-MoS2 Quantum Dots as Liquid Lubricant Additive for Tribological Behavior Improvement

Preparation and tribological properties of graphene oxide/nano-MoS2 hybrid as multidimensional assembly used in the polyimide nanocomposites

Investigation of tribological properties of hydrothermally synthesized halloysite composites with carbon, MoS 2 and CuO

Tribological property of MoS2-Cr3O4 nanocomposite films prepared by PVD and liquid phase synthesis