Abstract:Good gas permeability is an essential factor for the smooth operation and high performance in the lower part of the blast furnace. Under the present low carbon blast furnace smelting conditions, the coke layer is thinner, and the proportion of the molten metal in the coke layer is significantly higher, resulting in a major reduction in gas permeability, which seriously affects blast furnace operations. Also, the lower thickness of the coke layer weakens the process of solid-liquid carbon dissolution when the molten iron passes through the coke layer, which reduces the carbon content of the molten iron and further deepens the erosion of the refractory by the unsaturated molten iron. The carbon dissolution in the molten iron in a blast furnace core was measured by a high-temperature vacuum wettability test tool that analyzed the interface wetting activity between Fe−C melts with specific carbon mass fraction (3.8%, 4.3%, 4.8%) and 99.9% of high temperatures graphite plates. Besides, the scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) were used to analyze the graphite substrate’s carburizing morphology and carburizing distances. The results show that, with the increase of carbon content, the interface contact angle becomes bigger. The contact angle decreases with time, and eventually reaches a steady-state during the melting process, and the Fe−C melt with saturated carbon cannot be wet. The scanning electron microscopy analysis shows that a spherical cap-like depression is created by a cross-section of the Fe−C melt and the graphite substrate, and the radius and volume of the depression decrease with increasing carbon content. The study of the EDS scanning analysis shows that the amount of dissolved carbon atoms in the graphite substrate penetrates the Fe−C melt and decreases with increasing initial carbon concentration. The smaller the carburizing effect, the better the wetting is conducive to carbon mass transfer. It is found that by measuring carburizing of the carbon atoms in the graphite substrate into the Fe−C melt by calculating the surface energy reduces the surface energy between the two. Thus, the surface tension decreases and the melt spreads slowly with contact angle gradually decreasing during melting.

Phase and Reaction Behavior of the Iron–Coke Interface Along the Coke-Free Area in a Dissected Blast Furnace Hearth

Interface Wetting Behavior Between Iron and Coke During the Carbon Dissolution Process in a Blast Furnace

Dissection study of the deadman in a commercial blast furnace hearth

Graphitization and Performance of Deadman Coke in a Large Dissected Blast Furnace

Migration Behavior of K, Na, S, Ti in Hearth of a Commercial Blast Furnace

Deadman Behavior and Slag–Iron–Coke Interaction of Low Carbon and Safety Blast Furnace: A Review

Evolution of Coke Microstructure and Metallurgical Properties During Graphitization in a Blast Furnace

Wetting and Spreading Behavior of Molten Iron in Contact with Graphite Substrate: Interfacial Effects

Dynamic analysis of liquid permeability in the dripping zone of blast furnace and reaction behavior at the slag-coke interface

Study on the High-Temperature Interaction between Coke and Iron Ores with Different Layer Thicknesses

Interfacial Phenomenon and Marangoni Convection of Fe–C Melt on Coke Substrate under in Situ Observation

Influence of the Residual Iron on the Erosion of Carbon Bricks in a 4000 m3 Blast Furnace Hearth: From the Measured Properties to the Proposed Mechanisms

Interfacial reaction behavior in blast furnace and analysis of influence mechanism

CFD-DEM Study on the Synergistic Effect of Coke Consumption and Particle Dynamics in the Blast Furnace Raceway

The evolution of pore structure during coke graphitization process in the blast furnace hearth

Application of High‐ and Low‐Reactivity Cokes in Hydrogen‐Rich Blast Furnaces

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

“In situ” studies on cokes drilled from tuyere to deadman in a large-scale working blast furnace

Effect of water vapour on the interface reaction between carbon brick and molten iron in blast furnace hearth

Degradation Behaviors of Coke under Complex Solution Loss Conditions

Evolution and process analysis of the hearth activity in hydrogen-rich blast furnace