Abstract:The integration of a composite of porous medium with phase change material (PCM) offers significant advantages in thermal management systems, enhancing heat transfer efficiency and addressing various thermal regulation challenges. This approach utilizes the PCM's latent heat absorption and the enhanced thermal conductivity provided by the porous medium, resulting in optimized system performance. Its applicability spans across electronics cooling and building insulation systems. However, predicting the thermal behavior of this composite material is challenging, necessitating computational tools to anticipate its response under different conditions and evaluate its influence on cooling strategies. The objective of this study is to create a computational tool specifically tailored to evaluate constitutive parameters of this composite material, thereby providing a comprehensive description of its thermal behavior. To achieve this goal, the multiscale homogenization principle is employed to assess the composite's effective thermophysical material properties using the representative volume element approach. The repeating unit cell of the aluminum lattice is incorporated into the PCM to define a representative volume element. The finite element method (FEM) is utilized to solve the three-dimensional homogenization problem, yielding an orthotropic effective thermal conductivity due to the inherent symmetry of the repeating material cell. Moreover, the study leverages the apparent heat capacity method to effectively manage the phase transitions within the PCM domain, utilizing smooth and temperature-dependent functions to accurately describe the thermophysical properties of the PCM. Integrating the composite into battery pack thermal management, this study thoroughly examines thermal dynamics by comparing outcomes with and without PCM integration. The transient thermal problem is accurately tackled using the FEM, employing the evaluated effective constitutive parameters of the homogenized composite to minimize computational effort. The results indicate a notable decline in the highest temperatures of the battery pack, leading to a reduction of about 14 °C at the specific moment when the phase change material fully transitions into its liquid form. The obtained results emphasize the effectiveness and practical feasibility of the proposed thermal management strategy. The modeling approach presented provides a robust tool with significant efficiency in reducing computational time for analyzing the thermal behavior of large models, as the utilization of the homogenization technique notably decreases the computational time.

Thermal Management Analysis of Proton Exchange Membrane Fuel Cell Filled with Phase Change Material in Cooling Channel

Thermal management using phase change materials for proton exchange membrane fuel cells

Advancing heat management in proton-exchange membrane fuel cells through hybrid nano-composite phase change materials

A single-phase, non-isothermal model for PEM fuel cells

Enhancing Proton-Exchange Membrane Fuel-Cell Heat Transfer Performance with Embedded Cooling Channel Design: A Systematic Numerical Study

Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules

Thermal modeling of porous medium integrated in PCM and its application in passive thermal management of electric vehicle battery pack

A two-phase flow and non-isothermal agglomerate model for a proton exchange membrane (PEM) fuel cell

A novel thermal management for PEM fuel cell stack combining phase change materials with liquid cooling under low temperature condition

Thermal performance analyses of pulsating heat pipe for application in proton exchange member fuel cell

Three‐dimensional simulations for counter‐flow proton exchange membrane fuel cells with thin catalyst‐coated membrane cooled by liquid water

MPC-based thermal management for water-cooled proton exchange membrane fuel cells

Experimental investigation on thermal management of fuel cell by integrating phase change material in the cavities of the fin-based cooling plate

Experimental study on cooling performance of microencapsulated phase change suspension in a PEMFC

Numerical study on heat transfer characteristics and performance evaluation of PEMFC based on multiphase electrochemical model coupled with cooling channel

Thermal management system modeling of a water-cooled proton exchange membrane fuel cell

Model-Based Performance Optimization of Thermal Management System of Proton Exchange Membrane Fuel Cell

Microencapsulated Phase Change Material Suspension for Cold Start of PEMFC

Analysis of Water Management in Proton Exchange Membrane Fuel Cells

A Review of Thermal Management of Proton Exchange Membrane Fuel Cell Systems

Improved flow field design for air-cooled proton exchange membrane fuel cells