Abstract:This current research proposes a novel method for a Fuel Cell Thermal Management System (FTMS) by Integrating Phase Change Material (PCM) in the Cavities of the Fin-Based Cooling Plate. Stearyl alcohol is proposed as a PCM, which has a suitable melting temperature (56°C to 59°C) and reasonably a high phase change enthalpy (260 J/g) for managing the thermal load of a fuel cell. The experimental investigation has been performed at different power densities (0.25 to 0.50 W/cm 2 ) for different modes [cooling plate with fin (Mode 1), cooling plate with fin and PCM (mode 2), cooling plate with fin & fan (mode 3) and cooling plate with fin, fan & PCM (mode 4)]. The experimental results show that under mode 1, the FTMS can be operated without any cooling techniques till 0.25 W/cm 2 . In Mode 2, FTMS has the potential to handle a 20% higher thermal load (0.30 W/cm 2 ) as compared to mode 1 by maintaining the cooler plate temperature below 60°C. This result implies that the utilization of PCM aids in achieving better thermal management performance. Mode 3 delivered better performance than mode 1 and mode 2 for all the power densities. It is revealed that FTMS operated under mode 4 showed improved thermal management performance as compared to mode 3 in all power densities. These results imply that integrating fan cooling with passing cooling techniques helps us to achieve enhanced thermal management performance. Further, under mode 3, the cooler plate almost reaches a safe operating temperature at 0.45 W/cm 2 power density. On the other hand, under mode 4, the temperature of the cooling plate can be contained well below 60°C at 0.45 W/cm 2 . In addition, under mode 4, the FTMS held the desired temperature for an 86% longer duration as compared to mode 3 at 0.50 W/cm 2 . Based on the above results, it is concluded that the proposed cooling plate can deliver enhanced thermal management performance by utilizing a lower mass of PCM, and it will be beneficial for applications.

Experimental study on cooling performance of microencapsulated phase change suspension in a PEMFC

Microencapsulated Phase Change Material Suspension for Cold Start of PEMFC

Research on the modification of microencapsulated phase change material for thermal energy storage by nano-SiO2 and graphite

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Thermal Management Analysis of Proton Exchange Membrane Fuel Cell Filled with Phase Change Material in Cooling Channel

Advancing heat management in proton-exchange membrane fuel cells through hybrid nano-composite phase change materials

Thermal management using phase change materials for proton exchange membrane fuel cells

Numerical study on heat transfer characteristics and performance evaluation of PEMFC based on multiphase electrochemical model coupled with cooling channel

The Preparation of a Suspension of Microencapsulated Phase Change Material (MPCM) and Thermal Conductivity Enhanced by MXene for Thermal Energy Storage

EXPERIMENTAL RESEARCH ON LAMINAR FORCED CONVECTION HEAT TRANSFER CHARACTERISTICS OF MICROENCAPSULATED PHASE CHANGE MATERIAL SUSPENSION

Experimental research on the dynamic response characteristics of proton exchange membrane fuel cell thermal management using micro-heat pipe array

An Experimental Study of Convective Heat Transfer with Microencapsulated Phase Change Material Suspension: Laminar Flow in A Circular Tube under Constant Heat Flux

Experimental study of the thermal and power performances of a proton exchange membrane fuel cell stack affected by the coolant temperature

A novel thermal management for PEM fuel cell stack combining phase change materials with liquid cooling under low temperature condition

Experimental investigation on thermal management of fuel cell by integrating phase change material in the cavities of the fin-based cooling plate

Experimental investigation on the stability and heat transfer enhancement of modified mircoencapsulated phase change materials and latent functionally thermal fluids

Experimental and numerical study on thermal management of air-cooled proton exchange membrane fuel cell stack with micro heat pipe arrays

Numerical study of a MIMO-shaped cooling plate in PEMFC stack for heat transfer enhancement

Heat transfer performance by forced convection of microencapsulated phase change material-latent functional thermal fluid flowing in a mini-channels heat sink

Dynamic Thermal Characteristics Analysis of Microencapsulated Phase Change Suspensions Flowing Through Rectangular Mini-Channels for Thermal Energy Storage

Experiment and simulation of a LiFePO4 battery pack with a passive thermal management system using composite phase change material and graphite sheets