Abstract:To make a better application of phase change material (PCM) in the thermal management of aerospace systems, this paper investigates effects of the variation of foam-metal pore structure on the thermal performance of composite PCM (CPCM) subjected to different force fields. A two-dimensional numerical model based on the enthalpy-porosity method and the two-temperature energy equation is developed and verified with the experimental data. The thermal behavior of CPCM with different porosities (ω = 20 PPI, ε = 0.91, 0.93, 0.95 and 0.97) and different pore densities (ε = 0.95, ω = 10, 20, 40 and 80 PPI) are investigated under centrifugal acceleration conditions of 0, 5 and -5 g, respectively. A novel index of "end-state isobars" is introduced to describe the melting process of CPCM. The results show that the isotherms of CPCM liquid phase evolve gradually towards the interface parallel to end-state isobars in all conditions. At 0 g, decreasing the porosity effectively improves the thermal conduction of CPCM and slows down the approaching of the isotherms to the end-state isobars. Similarly, increasing the pore density significantly weakens the natural convection of liquid PCM and can also slows down the approaching isotherms to the end-state isobars. At 5 g, the isotherms can match exactly with the end-state isobars, after which the heat transfer process mainly depends on conductive. And decreasing the porosity can significantly improve the thermal performance of CPCM, while adjusting the pore density has almost no effect. At -5 g, the natural convection strength of CPCM is enhanced, changing porosity has limited effect on the heat transfer performance of CPCM, while decreasing pore density can significantly enhance the heat transfer performance. The results may provide some valuable reference for the evaluation and design of latent heat thermal energy storage (LHTES) system suitable to the aerospace field.

Numerical simulation of thermal properties of cubic period metal foam embedded graphene-aerogel composite PCM

High thermal conductivity of porous graphite/paraffin composite phase change material with 3D porous graphite foam

Numerical simulation on thermal behavior of partially filled metal foam composite phase change materials

High porosity and light weight graphene foam heat sink and phase change material container for thermal management

Numerical study on the thermal performance of foam-metal composite phase change material in different force fields

Pore-scale investigation on the heat-storage characteristics of phase change material in graded copper foam

A Novel Structure for Heat Transfer Enhancement in Phase Change Composite: Rolled Graphene Film Embedded in Graphene Foam

Melting of Phase Change Materials Inside Metal Foams with Uniform/graded Porosity: Pore-scale Simulation

Experimental and Numerical Studies on Melting Process of Phase Change Materials (pcms) Embedded in Open-Cells Metal Foams

Fabrication and Thermal Performance of 3D Copper-Mesh-Sintered Foam/Paraffin Phase Change Materials for Solar Thermal Energy Storage

Numerical investigation on thermal performance of phase change materials embedded in functionally graded metal foam

Experimental and Numerical Study of Heat Transfer Characteristics of a Paraffin/Metal Foam Composite PCM

Experimental Study on Heat Transfer During Melting in Metal and Carbon Foam Saturated with Phase-Change Materials for Temperature Control in Electronic Devices

Numerical investigation of the thermal characterization of metallic foams filled with paraffin and featuring double-gradient voids

Melting of PCM-graphite Foam Composites with Contact Thermal Resistance: Pore-scale Simulation

Hybridizing graphene aerogel into three-dimensional graphene foam for high-performance composite phase change materials

Simulation of PCM‐saturated porous solid matrix for thermal energy storage using the phase‐field method

Experimental and numerical investigations of enhanced thermal energy storage performance for foam/paraffin composite under different heating conditions

Numerical thermal performance assessment of phase change process in a PCM/foam-fins enclosure under various thermal conditions

Melamine Foam/CNT/Graphene Hybrid Aerogel-Based Phase Change Composites with High Latent Heat Capacity for Solar/Electrothermal Conversion

Phase Change Behaviour Study of PCM Tanks Partially Filled with Graphite Foam