Abstract:Metal foam has been widely employed to accelerate the melting behavior of latent heat thermal energy storage (LHTES) system. Nevertheless, its homogeneous structure has a limited enhancement on the conductive and convective heat transfers in the melting process. In this study, we numerically studied the heat storage performance of the graded metal foam composite phase change materials (CPCMs). The body-centered-cubic unit was conducted to represent the metal foam with a complex interconnected structure. For clarifying the effect of heat flux orientation, we built seven models with the inclinations of 0˚, 30˚, 60˚, 90˚, 120˚, 150˚, 180˚, respectively. Meanwhile, three types of metal foams with different structures, including the uniform, negative, and positive porosities, were built to enhance the melting process and analyze their effects. By comparing the melting performances of the uniform models with different inclinations, it is found that the heat flux orientations (model inclinations) have significant impacts on the melting behaviors. The models with large inclinations (θ > 90˚) have faster melting-processes compared with those small inclinations (θ ≤ 90˚). Besides, by comparing the models with different graded structures, we conclude that the negative model is the most helpful to the charging process. When the inclinations of the models are 120˚ and 150˚, the negative models have reductions of 11.06% on the complete melting times compared with those uniform models. Nevertheless, the models with small inclinations were slightly enhanced by negative porosity structure (0.52%–3.15%) but significantly weakened by positive structure (21.93%–30.00%). The study reveals the effects of heat flux orientation and graded metal foam on the melting performance of PCM. It provides a design and optimized reference for the models with tilted angles such as electronic devices and plate latent heat storage systems.

Melting characteristics of phase change material inside graded aluminum foam based on tetrakaidecahedron model: Pore-scale simulations

Melting of A Phase Change Material Filled in A Metal Foam: A Visualized Study at the Pore-Scale Using Infrared Imaging

Pore-scale investigation on the heat-storage characteristics of phase change material in graded copper foam

Numerical analysis on the effect of graded porosity in closed-cell metal foams/PCM composites

Numerical investigation on thermal performance of phase change materials embedded in functionally graded metal foam

Influence of model inclination on the melting behavior of graded metal foam composite phase change material: A pore-scale study

Numerical simulation on thermal behavior of partially filled metal foam composite phase change materials

Melting of Phase Change Materials with Volume Change in Metal Foams

Effect of filling configurations on melting heat transfer characteristic of phase change materials partially filled with metal foam

Numerical investigation of the thermal characterization of metallic foams filled with paraffin and featuring double-gradient voids

Numerical study on the thermal performance of foam-metal composite phase change material in different force fields

Thermal effect of nanoparticles on the metal foam composite phase change material: A pore-scale study

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Pore scale simulation for melting of composite phase change materials considering interfacial thermal resistance

Effect of enhancement in metal foam pore density on heat transfer of phase-change materials

Experimental investigation on the melting behavior of phase change materials in open-cell metal foams in an inclined rectangular enclosure

Melting behaviors of PCM in porous metal foam characterized by fractal geometry

Design and study of metal foam parameters on whole melting-solidification cycle in phase change heat storage system

Experimental and Numerical Studies on Melting/solidification of PCM in a Horizontal Tank Filled with Graded Metal Foam

Pore-scale investigation on effects of void cavity distribution on melting of composite phase change materials

Visualized-experimental investigation on the energy storage performance of PCM infiltrated in the metal foam with varying pore densities