Abstract:Phase change materials (PCMs) are promising options of thermal energy storage mediums. However, their low thermal conductivity and leakage issues remain the setback and limits the practical applications. In this work, Palmitic acid (PA)/copper foam (CF) composite PCMs have been prepared using the melting-vacuum impregnation method, with PA serving as the phase change material (PCM) and CF as the supporting material. The surface of CF with pore sizes of 15, 20, 25, 30 and 35 PPI (pores per inch) has been chemically modified with hydrochloric acid to increase the surface roughness of CF, strengthening the adsorption capacity of CF skeleton structure for PCM. The melting temperature and the latent heat of PA/CF composite PCMs were measured by differential scanning calorimeter (DSC) to evaluate the heat storage performance. The charging/discharging properties of the PA/CF composite PCMs have been experimentally investigated. At the same time, the solidification process of PA/CF composite PCMs was tested and analysed using infrared imaging technology. The introduction of CF to form composite PCM not only improves greatly the thermal conductivity of PCM but also prevents the leakage. The thermal conductivities of PA/CF composites have obtained a significant enhancement. The composite PCM based on 15 PPI CF has the highest thermal conductivity of 5.112 W/(m∙K), which is more than 31 times higher than that of pure PA. The 15 PPI sample melts at 61.4 °C with a latent heat of 174.788 kJ/kg and possesses the fastest charging/discharging rate. Besides, the prepared samples behave uniform temperature distribution and perfect shape-stabilization when cooled. The prepared samples have the high thermal conductivity and fast thermal response rate, and could play a crucial role in the field of heat storage and thermal management of electronic devices.

Preparation and thermal properties of palmitic acid/copper foam phase change materials

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Investigation on thermal properties of capric–palmitic–stearic acid/activated carbon composite phase change materials for high-temperature cooling application

Enhanced Thermal Conductivity of Palmitic Acid/copper Foam Composites with Carbon Nanotube As Thermal Energy Storage Materials

Improving the Heat Transfer of Phase Change Composites for Thermal Energy Storage by Adding Copper: Preparation and Thermal Properties

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Solution combustion synthesized copper foams for enhancing the thermal transfer properties of phase change material

Copper foam reinforced polymer-based phase change material composites for more efficient thermal management of lithium-ion batteries

Enhancement of thermal properties of phase change composites by copper film-coated carbon fiber felt

Preparation and thermal properties of palmitic acid @ZnO/Expanded graphite composite phase change material for heat storage

Synthesis, Characterization and Properties of Palmitic Acid/high Density Polyethylene/graphene Nanoplatelets Composites As Form-Stable Phase Change Materials

How can copper foam better promote the melting process of phase change materials

Structure, Characterization and Thermal Properties of the Form-Stable Paraffin/High-Density Polyethylene/Expanded Graphite/Epoxy Resin Composite PCMs for Thermal Energy Storage

Preparation and Thermal Performances of Lauric Acid/Polyvinyl Butyral/Graphene Nanoplates Composite Phase Change Materials

High thermal conductivity of porous graphite/paraffin composite phase change material with 3D porous graphite foam

Fabrication and Thermal Performance of 3D Copper-Mesh-Sintered Foam/Paraffin Phase Change Materials for Solar Thermal Energy Storage

Expanded waste glass/methyl palmitate/carbon nanofibers as effective shape stabilized and thermal enhanced composite phase change material for thermal energy storage

A polyurethane solid–solid phase change material for flexible use in thermal management

Preparation and thermal properties of form-stable palmitic acid/active aluminum oxide composites as phase change materials for latent heat storage

Preparation and characterization of eicosane-paraffin/expanded graphite/polyurethane as form-stable composite phase change materials with wide phase change temperature range

Thermally-induced flexible composite phase change material with enhanced thermal conductivity