Abstract:Background: Several analytical methods for the fiber pull-out test have been developed to evaluate the bond strength of fiber-matrix systems. We aimed to investigate the debonding mechanism of a fiber-silicone pull-out specimen and validate the experimental data using 3D-FEM and a cohesive element approach. Methods: A 3D model of a fiber-silicone pull-out testing specimen was established by pre-processing CT images of the typical specimen. The materials on the scans were posted in three different cross-sectional views using ScanIP and imported to ScanFE in which 3D generation was implemented for all of the image slices. This file was exported in FEA format and was imported in the FEA software (PATRAN/ABAQUS, version r2) for generating solid mesh, boundary conditions, and material properties attribution, as well as load case creation and data processing. Results: The FEM cohesive zone pull-out force versus displacement curve showed an initial linear response. The Von Mises stress concentration was distributed along the fiber-silicone interface. The damage in the principal stresses' directions S11, S22, and S33, which represented the maximum possible magnitude of tensile and compressive stress at the fiber-silicone interface, showed that the stress is higher in the direction S33 (stress acting in the Z-direction) in which the lower damage criterion was higher as well when compared to S11 (stress acting in the XY plane) and S23 (stress acting in the YZ plane). Conclusions: The comparison between the experimental values and the results from the finite element simulations show that the proposed cohesive zone model accurately reproduces the experimental results. These results are considered almost identical to the experimental observations about the interface. The cohesive element approach is a potential function that takes into account the shear effects with many advantages related to its ability to predict the initiation and progress of the fiber-silicone debonding during pull-out tests. A disadvantage of this approach is the computational effort required for the simulation and analysis process. A good understanding of the parameters related to the cohesive laws is responsible for a successful simulation.

MATHEMATICAL SIMULATION OF CONTACT INTERACTION OF A PANDA TYPE OPTICAL FIBER WITH ALUMINUM HALF-SPACE WITH DIFFERENT CHARACTER OF ELEMENTS conjugation

Assessment of the Influence of Protective Polymer Coating on Panda Fiber Performance Based on the Results of Multivariant Numerical Simulation

Development of Method for Polarization Alignment of PANDA Polarization Maintaining Fiber

Analysis of the Polymer Two-Layer Protective Coating Impact on Panda-Type Optical Fiber under Bending

Modeling and Experimental Validation of the Contact Characteristics for Laying During Automated Fiber Placement

Investigation of the interactions between two contact fibers in the fiber suspensions

Numerical simulation on velocities of two interacting fibers in fiber suspension

Analytical Estimation of Stress-Induced Birefringence in Panda-Type Polarization-Maintaining Fibers

Numerical study on the internal stress of optical fiber connector in the aerospace wide temperature range

Studying the effect of polymethyl methacrylate polymer opticals fibers (POFs) on the performance of composite materials based on the polyether ether ketone (PEEK) polymer matrix

Experimental Investigation and Modeling of Friction Coefficient and Material Removal During Optical Glass Polishing

An Investigation into the Densification-Affected Deformation and Fracture in Fused Silica under Contact Sliding

Effect of Contact Forms on the Wear of Hard Silicon Surfaces by Soft Polymers

Material characterization and computations of a polymeric metamaterial with a pantographic substructure

Structural Health Monitoring of Composite Laminate for Aerospace Applications via Embedded Panda Fiber Bragg Grating

Modeling of contact mechanics and defects investigation in automated fiber placement

Polarization-Dependent Lateral Optical Force of Subwavelength-Diameter Optical Fibers.

Development and Characterization of a Precisely Adjustable Fiber Polishing Arm

Micro-patterning of coatings on a fiber surface exploiting the contact instabilities of thin viscoelastic films

Experimental and numerical investigation on the strength of polymer-metal hybrid with laser assisted metal surface treatment

Cohesive Zone Modeling of Pull-Out Test for Dental Fiber-Silicone Polymer