Abstract:This study conducted longitudinal ultrasonic-assisted milling (UAM) tests and optimized a combination of milling technological parameters to achieve high-quality machining of TC18 titanium alloy. The motion paths of the cutter under the coupled superposition states of longitudinal ultrasonic vibration and end milling were analyzed. Based on the orthogonal test, the cutting forces, cutting temperatures, residual stresses, and surface topographical patterns of TC18 specimens under different UAM conditions (cutting speeds, feeds per tooth, cutting depths, and ultrasonic vibration amplitudes) were examined. The differences between ordinary milling and UAM in terms of machining performance were compared. Using UAM, numerous characteristics (including variable cutting thickness in the cutting area, variable cutting front angles of the tool, and the lifting of the cuttings by the tool) were optimized, reducing the average cutting force in all directions, lowering the cutting temperature, increasing the surface residual compressive stress, and significantly improving the surface morphology. Finally, fish scale bionic microtextures with clear, uniform, and regular patterns were formed on the machined surface. High-frequency vibration can improve material removal convenience, thus reducing surface roughness. The introduction of longitudinal ultrasonic vibration to the end milling process can overcome the limitations of traditional processing. The optimal combination of UAM parameters for titanium alloy machining was determined through the end milling orthogonal test with compound ultrasonic vibration, which significantly improved the surface quality of TC18 workpieces. This study provides insightful reference data for subsequent machining process optimization.

Ultrasonic Assisted Machining Overview: Accessing Feasibility and Overcoming Challenges for Milling Applications

Machining forces in ultrasonic-vibration assisted end milling

Review on the Development of the Accessory Rotary Ultrasonic Machining Tools

Improving Productivity in an Ultrasonic-Assisted Drilling Vertical Machining Center

Review of ultrasonic vibration-assisted machining in advanced materials

Process parameters influence on cutting force and surface roughness during hybrid laser- and ultrasonic elliptical vibration-assisted machining

Ultrasonic vibration-assisted milling of aluminum alloy

Ultrasonic Machining: A Total Mechanical Machining Technology Using Loose Abrasive Particles

Ultrasonic Machining: 1907 to Present

Ultrasonic assistance in drilling: FEM analysis and experimental approaches

Optimizing Processing Parameters and Surface Quality of TC18 via Ultrasonic-Assisted Milling (UAM): An Experimental Study

Tool–workpiece separation characteristic and surface generation in ultrasonic assisted milling

Clarifying the phenomenon of Ultrasonic Assisted Electric discharge machining

Review of multi-dimensional ultrasonic vibration machining for aeronautical hard-to-cut materials

Experimental Study of Electrophoretically Assisted Micro-Ultrasonic Machining

Optimization Milling Force and Surface Roughness of Ti-6Al-4V Based on Ultrasonic-Assisted Milling (UAM): An Experimental Study

A Study of Tool Motion in 2 Dimensional Ultrasonic Assisted Micro-Milling

Experimental Study of Multidimensional Ultrasonic Vibration-Assisted Milling of SiCp/Al Composites

Experimental investigations into ultrasonic assisted magnetic abrasive flow machining process

Experimental Investigation on Axial Ultrasonic Vibration Assisted Milling of Cr12MoV

Investigation of deviation and surface topography in ultrasonic vibration-assisted milling