Abstract:This study conducted longitudinal ultrasonic-assisted milling (UAM) tests and optimized a combination of milling technological parameters to achieve high-quality machining of TC18 titanium alloy. The motion paths of the cutter under the coupled superposition states of longitudinal ultrasonic vibration and end milling were analyzed. Based on the orthogonal test, the cutting forces, cutting temperatures, residual stresses, and surface topographical patterns of TC18 specimens under different UAM conditions (cutting speeds, feeds per tooth, cutting depths, and ultrasonic vibration amplitudes) were examined. The differences between ordinary milling and UAM in terms of machining performance were compared. Using UAM, numerous characteristics (including variable cutting thickness in the cutting area, variable cutting front angles of the tool, and the lifting of the cuttings by the tool) were optimized, reducing the average cutting force in all directions, lowering the cutting temperature, increasing the surface residual compressive stress, and significantly improving the surface morphology. Finally, fish scale bionic microtextures with clear, uniform, and regular patterns were formed on the machined surface. High-frequency vibration can improve material removal convenience, thus reducing surface roughness. The introduction of longitudinal ultrasonic vibration to the end milling process can overcome the limitations of traditional processing. The optimal combination of UAM parameters for titanium alloy machining was determined through the end milling orthogonal test with compound ultrasonic vibration, which significantly improved the surface quality of TC18 workpieces. This study provides insightful reference data for subsequent machining process optimization.

Experimental investigations into ultrasonic assisted magnetic abrasive flow machining process

Experimental investigation on the effet of input paramètres on surface roughness and MRR of abrasive flow machining process

Machining Performance for Ultrasonic-Assisted Magnetic Abrasive Finishing of a Titanium Alloy: A Comparison with Magnetic Abrasive Finishing

Mathematical modeling and process parameters optimization of ultrasonic assisted electrochemical magnetic abrasive machining

Machining forces in ultrasonic-vibration assisted end milling

Optimization of process parameters affecting surface roughness in magnetic abrasive finishing process

Process optimization and finite element modeling in magnetorheological abrasive finishing of SS-316L with surface characterization

Experimental Study of Electrophoretically Assisted Micro-Ultrasonic Machining

Experimental studies on material removal behavior in MRAH based finishing technique

Process parameters influence on cutting force and surface roughness during hybrid laser- and ultrasonic elliptical vibration-assisted machining

Clarifying the phenomenon of Ultrasonic Assisted Electric discharge machining

Experimental investigation on the effects of magnetic field assistance on the quality of surface finish for sustainable manufacturing of ultra-precision single-point diamond turning of titanium alloys

Analysis of thermal additive centrifugal abrasive flow machining process with improved electrode geometry

Optimizing Processing Parameters and Surface Quality of TC18 via Ultrasonic-Assisted Milling (UAM): An Experimental Study

Experimental Investigation and Parametric Optimization during Magnetic Field-Assisted Electric Discharge Machining of Nimonic 90

Optimization Milling Force and Surface Roughness of Ti-6Al-4V Based on Ultrasonic-Assisted Milling (UAM): An Experimental Study

An efficient approach to improving the finishing properties of abrasive flow machining with the analyses of initial surface texture of workpiece

On surface texture evolution in abrasive flow machining

An integrated systematic investigation of the process variables on surface generation in abrasive flow machining of titanium alloy 6Al4V

An experimental investigation on the effects of combined application of ultrasonic assisted milling (UAM) and minimum quantity lubrication (MQL) on cutting forces and surface roughness of Ti-6AL-4V

Influence of Process Parameters and Initial Surface on Magnetic Abrasive Finishing of Flat Surfaces on CNC Machine Tools