Abstract:Successful application of ultrasonically assisted drilling needs dynamic matching of the transducer with the drill bit considered as a continuous system loaded by the nonlinear processing load. When using standard tools this leads to the compatible choice of the transducer and accurate matching of the transducer and tool. The principal dynamical features of this matching are considered. Optimal position of excitation cross section of the drill bit, which depends on the relationship between elasto-dissipative characteristics of the transducer, the drill bit and the work load, is found in general analytical form. The optimal matching preserves the resonant tuning of the transducer and compensates the additional energy losses in the drill bit and processing. This produces also an amplification of vibration amplitude. The effect is achieved through the generation and maintenance of a nonlinear resonant mode of vibration and by active matching of the oscillating system with the dynamic loads imposed by the cutting process with the help of the intelligent electronic feedback circuitry.A prototype of an ultrasonic drilling system has been designed, manufactured. and tested. Improvements of machining characteristics due to superposition of ultrasonic vibration are demonstrated. Substantial improvements in the cutting performance of drill bits lead to benefits in drilling performance, which include faster penetration rates, reduction of tool wear, improvements in the surface finish, roundness and straightness of holes and, in ductile materials, the reduction or even complete elimination of burrs on both the entrance and exit faces of plates. The reduction in the reactive force experienced also causes greatly reduced deformation when drilling through thin, flexible plates and helps to alleviate delamination hazard.

Ultrasonic assistance in drilling: FEM analysis and experimental approaches

Experiments and Finite Element Simulation of Ultrasonic Assisted Drilling

An Experimental Study on Cutting Forces in Ultrasonic Assisted Drilling

Experimental and numerical study of ultrasonically-assisted drilling

Improving Productivity in an Ultrasonic-Assisted Drilling Vertical Machining Center

Modeling and optimization of thrust force, torque, and surface roughness in ultrasonic-assisted drilling using surface response methodology

Ultrasonic-assisted drilling of Inconel 738-LC

Experiments and simulations on ultrasonically assisted drilling

Study on the Simulation and Experiment of Ultrasonic-assisted Vibration Drilling of Ti6Al4V

Vibration excitation and energy transfer during ultrasonically assisted drilling

Effect of ultrasound-assisted vibration on Ti-6Al-4V/Al2024-T351 laminated material processing with geometric tools

Experimental investigation on cavitation effect and surface quality of ultrasonic-assisted micro-hole drilling

Investigation of the effect of ultrasonic vibration on the performance of the friction drilling by FEM simulation

Evaluation of different tool geometries in the finite element simulation of ultrasonic-assisted drilling of Ti6A14V

Investigating the effects of vibration method on ultrasonic-assisted drilling of Al/SiCp metal matrix composites

Study on tool wear in longitudinal-torsional composite ultrasonic vibration–assisted drilling of Ti-6Al-4V alloy

On the effect of load on vibration amplitude in ultrasonic-assisted drilling

Study on the mechanism of AL2024-T351/Ti-6Al-4V laminated materials by ultrasonic vibration drilling

Dynamic Analysis on Ultrasonic Vibration Assisted Micro-Drilling of Multi Layered Materials Using ABAQUS Explicit

Comparative study on drilling effect between conventional drilling and ultrasonic-assisted drilling of Ti-6Al-4V/Al2024-T351 laminated material