Abstract:Silty mudstone is highly susceptible to the influence of hot and humid environments, leading to the deterioration of its mechanical properties presenting a geohazard and even resulting in geological disasters. Accurately characterizing the effects of bedding and water-rock interaction on the mechanical behavior of silty mudstone is a crucial prerequisite for the protection and reinforcement of silty mudstone slopes. To this end, uniaxial compression tests and Brazilian splitting tests were conducted to examine the mechanical properties of bedded silty mudstone. Based on the test results, the effects of bedding angle and soaking time on mechanical properties such as tensile strength, uniaxial compressive strength and elastic modulus of bedded silty mudstone were revealed. The test results showed that the tensile strength increased exponentially with increasing bedding angle. The observed split failure patterns of bedded silty mudstone encompassed splitting-pulling damage, shear damage, and splitting damage. The uniaxial compressive strength of silty mudstone exhibited a U-shaped variation with an increase in bedding angle. The specimen with a bedding angle of 45° had the lowest uniaxial compressive strength at 7.64 MPa. Furthermore, the elastic modulus of silty mudstone was positively correlated with the bedding angle. The failure patterns of bedded silty mudstone under uniaxial compression included splitting-tension damage, shear-slip damage, and splitting-shear damage. The saturated tensile strength, uniaxial compressive strength and elastic modulus of bedded silty mudstone exhibited an exponential decrease with increasing soaking time. The test data confirmed the applicability of the Jaeger equation to the uniaxial compressive strength of bedded silty mudstone. Subsequently, a modified Hoek-Brown failure criterion was derived by combining fracture mechanics theory and test results and introducing a softening factor. The parameters A , D and m in the above failure criterion decreased exponentially with increasing soaking time and a empirical Hooke-Brown failure criterion considering the soaking time was established. Compared with previous theoretical models, this model is more adaptable to the actual engineering situation, which results in more accurate calculations.

Investigation into the Mechanical Behaviour of Silica Rich Bituminous Sand

Advanced laboratory investigation of axial cyclic loading in silica sands

Theoretical Breakage Mechanics and Experimental Assessment of Stresses Surrounding Piles Penetrating into Dense Silica Sand

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Micromechanical Investigation of the Shear Behaviors of Sand‒rubber Mixtures Using a Multibody Meshfree Method

Field and Model Investigations into the Influence of Age on Axial Capacity of Displacement Piles in Silica Sands

Experimental Investigation of Sand Subjected to High Stress Levels in Wet and Dry Conditions

Investigation on the mechanical properties of a calcareous sand: the role of the initial fabric

RESEARCH OF DYNAMIC PROPERTIES CHANGES AND MICROSCOPIC MECHANISM OF AGEING SAND

Laboratory investigations on bituminous concrete mixtures utilizing foundry sand.

Mechanical Behaviour of Biocemented Sands at Various Treatment Levels and Relative Densities

An experimental investigation on effects of saturation levels and fluid types on elastic properties of bitumen-saturated sands at elevated temperatures

Strength and Dilatancy Behaviors of Deep Sands in Shanghai with a Focus on Grain Size and Shape Effect

Experiment study on normalized compression behaviour of marine diatomaceous soil considering microstructure of biogenic silica

Influence of fines and gravel particles on strength-dilatancy of river sand: Effect of depositional conditions

Effect of particle characteristics on the evolution of particle size, particle morphology, and fabric of sands loaded under uniaxial compression

Experimental investigation on the damping characteristics in dry and saturated sands

A Comparison of Bitumen Sands and Bitumen Carbonates: Measured Data

Strength characteristics of dune sand stabilized with lime-silica fume mix

Influences of Bedding Angle and Soaking Time on the Mechanical Behaviour of Silty Mudstone: Laboratory Testing and Theoretical Modelling