Abstract:Flexible wearable electronics have been developing rapidly in recent years, and one of its core devices, thin‐film transistor (TFT), is also attracting attention. Current TFT preparation processes usually require high annealing temperatures (>350°C), which is not conducive to their application on most flexible substrates (PET, PEN and nanopaper, etc.). In this paper, we propose a strategy for the room temperature preparation of Nd:AIZO/Al2O3 dual‐layer TFT devices, which have appreciable electrical properties without additional annealing treatment. We have used Taguchi orthogonal experimental methods to investigate the effects of three essential process parameters on the performance of the films and devices. We analyze the test results of XRR, μ‐PCD, XPS of the films and correlate them with TFTs electrical performance. As Nd:AIZO deposition time decreases and Al2O3 oxygen percentage and time during deposition increase, the μsat and SS of TFT devices are improved. With the preferred combination of parameters applied to the device preparation, the device exhibits a saturation mobility μsat of 24.3 cm2V‐1s‐1, a threshold voltage Vth of ‐1.4 V, a subthreshold swing SS of 0.21 V/decade and an Ion/Ioff ratio of 4.26×108. The ultra‐thin Al2O3 layer act as defect modification and form high‐speed electron transport in channel layer. This dual‐layer structure reduced the localized defect states in the back‐channel region and the water‐oxygen adsorption. The room temperature preparation of the dual‐layer TFT process proposed in this paper is compatible with large‐size low‐cost flexible substrates. It has great potential for application in green flexible wearable electronics. This article is protected by copyright. All rights reserved.

Design of different oxygen content and high performance bilayer In 2 O 3 thin-film transistors at room temperature for flexible electronics

Eco-Friendly, Water-Induced In2O3 Thin Films for High-Performance Thin-Film Transistors and Inverters

Low-Temperature Solution-Processed Bilayer Ingazno/In 2O 3 Thin Film Transistors Based on Lightwave Annealing

Facile Room Temperature Routes to Improve Performance of IGZO Thin-Film Transistors by an Ultrathin Al2O3 Passivation Layer

High‐performance Nd: AIZO/Al2O3 dual active layer design without thermal annealing: high‐speed electron transport and defect modification in thin film transistors

Rational Design of Different Ga Content Bilayer InGaZnO Thin-Film Transistors With Al2O3/HfO2 Passivation Layer

High-performance bilayer metal-oxide thin film transistors using ultra-thin solution-processed ZrOx dielectric

Fast Improved Thin-Film Transistors with Atomic-Layer-Deposited In2O3 Channels Via O2 Plasma Treatment

Enhanced Electrical Performance and Stability of Solution-Processed Thin-Film Transistors with In2O3/In2O3:Gd Heterojunction Channel Layer

Synergistic approach to high-performance oxide thin film transistors using a bilayer channel architecture

Flexible Dual-layer Channel Gallium-doped ZnO Thin-film Transistors Fabricated on Plastic Substrates at Room Temperature

All-Sputtered, Flexible, Bottom-Gate Igzo/Al2o3 Bi-Layer Thin Film Transistors on Pen Fabricated by A Fully Room Temperature Process

High-Performance Dual-Layer Channel Indium Gallium Zinc Oxide Thin-Film Transistors Fabricated In Different Oxygen Contents At Low Temperature

Flexible Transparent Junctionless TFTs with Oxygen-Tuned Indium-Zinc-Oxide Channels

Room-temperature fabrication of flexible oxide TFTs by co-sputtering of IGZO and ITO

Solution-processed bilayer InGaZnO/In2O3 thin film transistors at low temperature by lightwave annealing

Viable Approach of Tuning Oxide Semiconductor Thin Films in Solution‐Processed Heterojunction Thin Films Transistors for Both Higher Performances and Stability

Teflon/SiO2 Bilayer Passivation for Improving the Electrical Reliability of Oxide TFTs Fabricated Using a New Two-Photomask Self-Alignment Process

High-Performance Fully Amorphous Bilayer Metal-Oxide Thin Film Transistors Using Ultra-Thin Solution-Processed Zrox Dielectric

High mobility and productivity of flexible In2O3 thin-film transistors on polyimide substrates via atmospheric pressure spatial atomic layer deposition

High-performance a-IGZO-based flexible TTFT with stacked dielectric layers via ultrathin high-κ SrTiO3 buffer layer grown on HfO2