Abstract:Recently, post-combustion CO 2 removal has been considered also for the CO 2 separation from the flue gases of Waste-to-Energy (WtE) plants, that manage high amounts of Municipal Solid Waste (MSW) by combusting it and generating power and heat. Moreover, because of the presence in MSW of an organic waste fraction, net negative CO 2 emissions are feasible when integrating CCUS systems into WtE plants. Currently, to the best of the authors' knowledge, there are only few incineration plants around the world that are successfully coupled with a carbon capture system, resulting in near-zero (or even negative) CO 2 emission power generation. This work focuses on the evaluation of the whole value chain of the non-biogenic CO 2 that is emitted in a power plant located in Northern Italy and on its possible utilization, from the CO 2 source in the flue gas to the market-ready product. The design of the process for the CO 2 removal from the flue gas has been carried out specifically for the considered flue gas to be treated with an aqueous solution of MonoEthanolAmine 30% wt., the benchmark solvent used in other types of power plants (fuelled by coal and natural gas). The main process parameters (e.g., lean loading, absorber packing height, regenerator packing height, regenerator pressure, gas inlet temperature, solvent inlet temperature) have been selected in order to optimize the reboiler duty and the water requirement, the latter being usually not considered in literature works dealing with this type of analysis. Then, the CO 2 utilization has been evaluated, considering the options of both sequestration in the Adriatic Sea and utilization of CO 2 for production of sodium bicarbonate, on the basis of the information available in the literature. In compliance with Directive 2003/87/EC and with the Italian legislation, Waste-to-Energy plants that treat municipal solid waste are currently exempt from the application of the CO 2 Emissions Trading System (ETS). This article speculates about the application of the ETS to an urban WtE plant, located in Northern Italy, and evaluates its economic implications by comparing the purchase of emission quotas with the construction of a CCS or CCU plant. A business plan, detailing the obtained revenues from the utilization and from the avoided cost of purchasing emission allowances and the expenses related to the operation of the carbon capture plant, taking into account the taxes and the inflation, has been created and used for comparing the two considered CO 2 value chains. For the option of CO 2 sequestration, sensitivity analyses on the variation of investment costs (+10 %), operating costs (+10 %) and revenues (−10 %) have been performed and the breakeven value of the ETS certificate that can make the Net Present Value (NPV) non-negative has been determined. For the option of CO 2 utilization, the revenue from sodium bicarbonate that can make its production profitable has been evaluated.

Novel approach to CO 2 capture: Improving the hybridization between membranes and calcium-looping

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Efficient CO<sub>2</sub> capture by a novel deep eutectic solvent through facile, one-pot synthesis with low energy consumption and feasible regeneration

Optimal Design of a Subambient Membrane Separation System with Work and Heat Integration for CO2 Capture

Assessment of Hybrid Solvent—Membrane Configurations for Post-Combustion CO2 Capture for Super-Critical Power Plants

Integrated CO2 Capture and Utilization by Combining Calcium Looping with CH4 Reforming Processes: A Thermodynamic and Exergetic Approach

A novel calcium looping–integrated NGCC power plant configuration for carbon capture and utilization—Comprehensive performance analysis

Proposal and thermodynamic investigation of pressurized calcium looping integrated with chemical looping combustion for tail-end CO 2 capture in a retrofitted natural gas combined cycle power plant

Environmental and energetic analysis of coupling a biogas combined cycle power plant with carbon capture, organic Rankine cycles and CO2 utilization processes

A Calcium Looping System Powered by Renewable Electricity for Long-Term Thermochemical Energy Storage, Residential Heat Supply and Carbon Capture

Membrane CO2 Separation System Improvement for Coal-Fired Power Plant Integration

Partial Oxycombustion and Amines-driven Waste-to-Methane for Improved Carbon Capture and Utilization (CCU)

Insight and Comparison of Energy-efficient Membrane Processes for CO2 Capture from Flue Gases in Power Plant and Energy-intensive Industry

A novel Ca-Ni looping with carbonation heat thermochemical regeneration method for post-combustion CO 2 capture: System integration, energy-saving mechanism, and performance sensitivity analysis

An integrated de-carbonization supercritical coal-fired power plant incorporating a supplementary steam turbine, process heat recovery and a modified boiler structure

Techno-economic assessment of the CO 2 value chain with CCUS applied to a waste-to-energy Italian plant

Techno-Economic Evaluation on Solar-Assisted Post-Combustion CO2 Capture in Hollow Fiber Membrane Contactors

Optimised integration of post-combustion CO2 capture process in greenfield power plants

Exergetic Analysis of a Natural Gas Combined-Cycle Power Plant with a Molten Carbonate Fuel Cell for Carbon Capture

Process simulation and techno-economic analysis of CO 2 capture by coupling calcium looping with concentrated solar power in coal-fired power plant

Energy-efficient Process Intensification for Post-Combustion CO2 Capture: A Modeling Approach