Ferrate (IV) synthesis using derived persulfate during treatment of oil recovery wastewater

Haoda Guo,Xingxing Zhang,Naidong Zhang
DOI: https://doi.org/10.1080/09593330.2024.2365428
IF: 3.475
2024-06-16
Environmental Technology
Abstract:Using oil recovery wastewater as the target material, the degradation of organic matter in oilfield wastewater was studied in an anodic oxidation system using Ti/Ru-Ir oxide-coated anode and 0.7mMNa 2 SO 4 as the electrolyte. The TOC of the wastewater was 210 mg/L at the beginning of the electrolysis in the electrolysis system, and it decreased from 210 to 93.6 mg/L after 50 min of electrolysis. Under the action of this system, sulfate was oxidized to persulfate, and the apparent concentration of persulfate was 15.02 mM, oxidation and degradation of organic matter in wastewater by the action of newly generated persulfate.. Afterwards, NaOH and Fe 2 (SO4) 3 were added to the electrolyzed wastewater, and the TOC in the wastewater was further reduced to 25.1 mg/L due to the coagulation effect of the newly generated Fe(OH) 3 precipitate. The TOC removal rate of the wastewater treated by this process reached 88.0%, which meets the discharge requirements. At the same time, the derived persulfate oxidized Fe(OH) 3 to generate a green substance, which was identified as Na 2 FeO 3 by IR, UV, and XRD analyses. Na 2 FeO 3 served as a highly effective water-purifying agent, demonstrating superior performance when compared to FeO 4 2- . The method reported in this study not only provides a strategy for waste resource recycling but also offers the potential for mass production of ferrate (IV).
environmental sciences
What problem does this paper attempt to address?