Abstract:While flow-through anodic oxidation (FTAO) technique has demonstrated high efficiency to treat various refractory waste streams, there is an increasing concern on the secondary hazard generation thereby. In this study, we developed an integrated system that couples FTAO and cathodic reduction processes (termed FTAO-CR) for sustainable treatment of chlorine-laden industrial wastewater. Among four common electrode materials ( i.e. , Ti 4 O 7 , β -PbO 2 , RuO 2 , and SnO 2 -Sb), RuO 2 flow-through anode exhibited the best pollutant removal performance and relatively low ClO 3 and ClO 4 yields. Because of the significant scavenging effect of Cl − in real wastewater treatment, the direct electron transfer process played a dominant role in contaminant degradation for both active and nonactive anodes though active species ( i.e. , active chlorine) were involved in the subsequent transformation of the organic matter. A continuous FTAO-CR system was then constructed for simultaneous COD removal and organic and inorganic chlorinated byproduct control. The quality of the treated effluent could meet the national discharge permit limit at low energy cost (~4.52 kWh m 3 or ~0.035 kWh g 1 -COD). Results from our study pave the way for developing novel electrochemical platforms for the purification of refractory waste streams whilst minimizing the secondary pollution. Environmental Implications Industrial wastewater usually features high organic matter content and complex composition, posing a significant environmental risk. While anodic oxidation has demonstrated high efficiency, there is increasing concern on the secondary hazard generation thereby. An energy-efficient system coupling flow-through anodic oxidation and cathodic reduction processes is therefore proposed, achieving simultaneous organic contaminant removal and chlorinated byproduct control. The direct electron transfer process imparts an advantage in treating chlorine-laden wastewater compared to the • OH-based advanced oxidation counterparts. The results of this study pave the way for developing novel electrochemical platforms for the purification of refractory waste streams whilst minimizing the secondary pollution.

Treatment of Oilfield Wastewater and Synthesis of Na2FeO3 in Chloride Ion Anode Oxidation System

ELECTROCHEMICAL TREATMENT OF RECIRCULATING AQUACULTURE WASTEWATER USING A Ti/RuO2-IrO2 ANODE FOR SYNERGETIC TOTAL AMMONIA NITROGEN AND NITRITE REMOVAL AND DISINFECTION

Ferrate (IV) synthesis using derived persulfate during treatment of oil recovery wastewater

Anodic oxidation to produce persulfate for treatment of oilfield wastewater and synthesis of Fe(VI)

Enhanced Conversion from H2O2 to 1O2 on Cu–N Centers: Investigation of Mechanisms and Application in Alkaline Wastewater Treatment

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

Electrochemical Oxidation of Sulfide in Oil Wastewater Using Ti/Iro2 Anode

Reclamation of acid pickling waste: A facile route for preparation of single-phase Fe 3 O 4 nanoparticle

Photoelectrocatalytic decontamination of oilfield produced wastewater containing refractory organic pollutants in the presence of high concentration of chloride ions

Energy-efficient Treatment of Refractory Industrial Effluent Using Flow-through Electrochemical Processes: Oxidation Mechanisms and Reduction of Chlorinated Byproducts

Treatment of Oilfield Wastewater by Fenton'S Process

Enhanced treatment of oily ink wastewater using a modified degreaser by nano-Fe3O4/Na2S2O8: Efficient coagulation and sedimentation

Enhancement of COD Removal from Oilfield Produced Wastewater by Combination of Advanced Oxidation, Adsorption and Ultrafiltration

Treatment of simulated electroplating wastewater containing Ni(II)-EDTA by Fenton oxidation combined with recycled ferrite process under ambient temperature

Innovative strategy for the treatment of oily wastewater by in-situ synthesis of nitrogen-doped biochar supported FeS for activation of peroxymonosulfate

Treatment of aniline-containing wastewater by electrochemical oxidation using Ti/RuO2 anode: the influence of process parameters and reaction mechanism

Novel Strategy for Treating High Salinity Oilfield Produced Water: Pyrite-Activated Peroxymonosulfate Coupled with Heterotrophic Ammonia Assimilation

Modified Fe3O4 magnetic nanoparticles for COD removal in oil field produced water and regeneration

Efficient Treatment of an Electroplating Wastewater Containing Heavy Metal Ions, Cyanide, and Organics by H2o2 Oxidation Followed by the Anodic Fenton Process

Using waste to treat waste: clean production of erdite/zeolite composite flocculant from groundwater treatment sludge for real electroplating wastewater treatment

Optimization of electro‐oxidation and electro‐Fenton techniques for the treatment of oilfield produced water