Abstract:The waste acid generated during the production of titanium dioxide contained a high proportion of ferrous ions. Comprehensive utilization of these waste acid involves the recovery of sulfuric acid and iron. However, traditional methods faced difficulty in attaining the desired outcome. Therefore, this study proposed a treatment process primarily based on membrane electrolysis. Initially, selective electrodialysis was employed to recover sulfuric acid from the waste acid. The effects of initial acid concentration, potential, and operating time on the performance of selective electrodialysis were investigated. Subsequently, a three-chamber membrane electrolysis method was utilized to oxidize Fe2+ to Fe3+ in the anode chamber and generate OH– in the cathode chamber. Both compounds were directed to the precipitation chamber through ion exchange membranes, resulting in the formation of iron hydroxide and the successful recovery of iron. The findings revealed that when the waste acid had a high initial concentration, it was recommended to operate at a higher potential. When treating 18 % of the waste acid, 77.5 % of the sulfuric acid can be recovered while 78 % of the ferrous ions were retained. As the acidity decreased, the potential could be reduced, resulting in a higher recovery rate of sulfuric acid and retention rate of Fe2+. By using a current of 150 mA during membrane electrolysis and maintaining a pH of 2.4 in the precipitation chamber, a purity of 94 % iron hydroxide was achieved. The ion flux of the anion exchange membrane decreased by 19 % after 8 h of electrolysis. This reduction could be mitigated by cleaning the membrane with titanium dioxide waste acid with a pH of 0.4 for 30 min. This study is expected to introduce innovative ideas and methods for the efficient and high-purity recovery of resources from titanium dioxide waste acid.

A Stepwise Processing Strategy for Treating Highly Acidic Wastewater and Comprehensive Utilization of the Products Derived from Different Treating Steps.

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Efficient recovery of Ti, Fe and Mn based on the synergistic effect of acidic titanium dioxide wastewater and pyrolusite

Resource utilization of strongly acidic wastewater and red gypsum by a harmless self-treatment process

Application of a Novel Strategy—advanced Fenton-chemical Precipitation to the Treatment of Strong Stability Chelated Heavy Metal Containing Wastewater

Efficient removal and transformation of Cr(VI) from alkaline wastewater to form a ferrochromium spinel multiphase via a modified ferrite process

Treatment of industrial ferric sludge through a facile acid-assisted hydrothermal reaction: Focusing on dry mass reduction and hydrochar recyclability performance

A Novel Strategy for Treating Chromium Complex Wastewater: the Combination of a Fenton-like Reaction and Adsorption Using Cobalt/iron-Layered Double Hydroxide As Catalyst and Adsorbent

Efficient One-Step Removal and Immobilization of Recalcitrant Cr(III) and Cr(VI) Fractions in Real Electroplating Wastewater Using Electrolysis with O2 Aeration

Simultaneous chelated heavy metals removal and sludge recovery through titanium coagulation: From waste to resource

Water Decontamination from Cr(III)-Organic Complexes Based on Pyrite/H 2 O 2 : Performance, Mechanism, and Validation.

A Novel Approach for Separation and Recovery of Titanium, Scandium, Iron from Acidic Wastewater and Red Gypsum Utilization

Innovative treatment of industrial effluents through combining ferric iron and attapulgite application

Removal and recycling of hexavalent chromium from alkaline wastewater via a new ferrite process to produce the valuable chromium ferrite

Synthesizing slow-release fertilizers via mechanochemical processing for potentially recycling the waste ferrous sulfate from titanium dioxide production

A Highly Synergistic Dual-Cathode Electro-Fenton Process with Self-Regulation of pH and Coating Stability for the Effective Degradation of Refractory Pollutants

A way out of the alkaline bauxite residue: Synthesizing micro-electrolysis composite material towards the synergistic fenton degradation of high-concentration organic wastewater

Development of a natural iron-based mineral/biochar composite for efficient simultaneous removal of Cr(VI) and methylene blue in the presence of oxalic acid

Recovery of sulfuric acid and iron from titanium dioxide waste acid by membrane electrolysis combined with selective electrodialysis

The sustainable treatment of chemical polishing wastewater under low-carbon economy: Pollutants removal, resource recovery and energy generation

Promoted micropollutant degradation and structural evolution of natural organic matter by a novel S(IV)-based water treatment strategy