Abstract:Development and testing of continuous polyamide fiber reinforced polycaprolactone composites. Polycaprolactone (PCL) is a biodegradable material that has received significant attention in the last decade. It is characterized by low toxicity and biocompatibility, making it a common choice as a tissue scaffold material in the medical field. However, its low mechanical performance has limited its application. This work focuses on the development and characterization of a PCL based printing material reinforced with continuous polyamide 6 fiber (PA6/PCL). PA6/PCL filaments were produced through a hot melt impregnation process. A custom fused deposition modeling (FDM) printer was used to print the PA6/PCL composites. Thermal analysis was conducted to assess the thermal properties of the composite materials. Mechanical tests were performed to evaluate the mechanical properties of the printed composites and determine the effect of PA6 continuous fiber on their mechanical properties. The study showed that adding continuous PA6 fibers significantly improved the strength and modulus of PCL. When 7.9 wt% PA6 fiber is added, the tensile strength of PCL printed parts increased by more than 300%, and the tensile modulus increased by 36%. In addition, flexure strength increased by 130% and flexure modulus by 150%. Scanning electron microscope was used to study the fracture surfaces of the composites and it was found that the main failure modes were fiber fracture and debonding between fiber and matrix. This research demonstrates that adding continuous PA6 fibers tremendously enhances the mechanical properties of printed PCL parts. This novel composite material can potentially broaden the applications of FDM technology and provide more material options for biomedical applications. Highlight A novel FDM composite material with excellent tensile strength was developed. Continuous PA6 fiber has been used to reinforce PCL. A new test method was developed for evaluating filament material for FDM. The tensile strength of PCL is improved by 300% when 7.9 wt% PA6 fiber is added. The printability of the FDM composite material has been confirmed.

Fatigue behavior and electromechanical properties of additively manufactured continuous wire polymer composites for structural health monitoring

3D printed continuous wire polymer composites strain sensors for structural health monitoring

A comparative study on the electromechanical properties of 3D-Printed rigid and flexible continuous wire polymer composites for structural health monitoring

Self-Sensing Of Position-Related Loads In Continuous Carbon Fibers-Embedded 3d-Printed Polymer Structures Using Electrical Resistance Measurement

Self-monitoring Continuous Carbon Fiber Reinforced Thermoplastic Based on Dual-Material Three-Dimensional Printing Integration Process

Additive manufacturing of Continuous Wire Polymer Composites

Flexural properties of three-dimensional printed continuous wire polymer composites

Evaluation of Carbon Fiber-Embedded 3D Printed Structures for Strengthening and Structural-Health Monitoring

Integrated self-monitoring and self-healing continuous carbon fiber reinforced thermoplastic structures using dual-material three-dimensional printing technology

Lap Shear Strength and Fatigue Analysis of Continuous Carbon-Fibre-Reinforced 3D-Printed Thermoplastic Composites by Varying the Load and Fibre Content

Tensile fatigue behavior of short and continuous carbon fiber reinforced additively manufactured thermoplastic multiscale composite

Influencing Factors and Sensitivity Analysis for the Fatigue of FRP Wire Based on the Progressive Fatigue Damage Model

Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Reinforced PA6 Materials in Fused Filament Fabrication (FFF)

Fabrication and characterization of in situ structural health monitoring hybrid continuous carbon/glass fiber–reinforced thermoplastic composite

Comprehensive Study of Mechanical, Electrical and Biological Properties of Conductive Polymer Composites for Medical Applications through Additive Manufacturing

Printability and mechanical behaviors of continuous polyamide fiber reinforced polycaprolactone composites

Fatigue crack growth behaviour of wire arc additively manufactured steels

Assessment of the effects of the addition of continuous fiber filaments in PA 6/short fiber 3D-printed components using interrupted in-situ x-ray CT tensile testing

An investigation into mechanical properties of a 3D printed two-matrix continuous fiber composites with multi-cavity structure

Mechanical properties and fatigue analysis on poly(ε-caprolactone)-polydopamine-coated nanofibers and poly(ε-caprolactone)-carbon nanotube composite scaffolds

Prediction of Fatigue Life of Polyetherimide/Carbon Fiber Particulate Composites at Various Maximum Stresses and Filler Contents