[ENZYMATIC BETA SUBSTITUTION OF PHOSPHOSERINE AND CYSTEINE BY SULFITE. SOME REMARKS ON THE MECHANISM OF BETA SUBSTITUTION IN THE PRESENCE OF PYRIDOXAL PHOSPHATE ENZYMES].

P. Fromageot,A. Sentenac

1964-06-01

Abstract:

What problem does this paper attempt to address?

Development of Mechanically Enhanced Polycaprolactone Composites by a Functionalized Titanate Nanofiller for Melt Electrowriting in 3D Printing.

Le Pang,Naomi C. Paxton,Jiongyu Ren,Fan Liu,Haifei Zhan,Maria A. Woodruff,Arixin Bo,Yuantong Gu

DOI: https://doi.org/10.1021/acsami.0c14831

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Three-dimensional (3D) printing technologies are widely applied in various industries and research fields and are currently the subject of intensive investigation and development. However, high-performance materials that are suitable for 3D printing are still in short supply, which is a major limitation for 3D printing, particularly for biomedical applications. The physicochemical properties of single constituent materials may not be sufficient to meet the needs of modern biotechnology development and production. To enhance the materials' performance and broaden their applications, this work designed and tested a series of titanate nanofiller (nanowire and nanotube)-enhanced polycaprolactone (PCL) composites that were 3D-printable and provided superior mechanical properties. By grafting two different functional groups (phenyl- and thiol-terminated ligands), the nanofiller surface showed improved hydrophobicity, which significantly improved their dispersion in the PCL matrix. After characterizing the surface modification, we evaluated the significance of the homogeneity of the ceramic nanofiller in terms of printability, formability, and mechanical strength. Melt electrowriting additive manufacturing was used to fabricate microfibers of PCL and PCL/nanofiller composites. Improved nanofiller dispersion enabled intact and uniform sample morphology, and in contrast, nanofiller aggregation greatly varied the viscosity during the printing process, which could result in poorly printed structures. Importantly, the modified ceramic/PCL composite delivered enhanced and stable mechanical properties, where its Young's modulus was measured to be 1.67 GPa, which is more than 7 times higher compared to that of pristine PCL (0.22 GPa). Retaining the cell safety properties (comparable to PCL), the concept of enhancing biocompatible polymers with modified nanofillers shows great potential in the field of customized 3D printing for biomedicine.
The Effect of Printing Parameters on Electrical Conductivity and Mechanical Properties of PLA and ABS Based Carbon Composites in Additive Manufacturing of Upper Limb Prosthetics

Attila Pentek,Miklos Nyitrai,Adam Schiffer,Hajnalka Abraham,Matyas Bene,Emese Molnar,Roland Told,Peter Maroti

DOI: https://doi.org/10.3390/cryst10050398

IF: 2.7

2020-05-15

Crystals

Abstract:Additive manufacturing technologies are dynamically developing, strongly affecting almost all fields of industry and medicine. The appearance of electrically conductive polymers has had a great impact on the prototyping process of different electrical components in the case of upper limb prosthetic development. The widely used FFF 3D printing technology mainly uses PLA (polylactic acid) and ABS (acrylonitrile butadiene styrene) based composites, and despite their presence in the field, a detailed, critical characterization and comparison of them has not been performed yet. Our aim was to characterize two PLA and ABS based carbon composites in terms of electrical and mechanical behavior, and extend the observations with a structural and signal transfer analysis. The measurements were carried out by changing the different printing parameters, including layer resolution, printing orientation and infill density. To determine the mechanical properties, static and dynamic tests were conducted. The electrical characterization was done by measuring the resistance and signal transfer characteristics. Scanning electron microscopy was used for the structural analysis. The results proved that the printing parameters had a significant effect on the mechanical and electrical characteristics of both materials. As a major novelty, it was concluded that the ABS carbon composite has more favorable behavior in the case of additive manufacturing of electrical components of upper limb prosthetics, and they can be used as moving, rotating parts as well.

materials science, multidisciplinary,crystallography
Progress and opportunities in additive manufacturing of electrically conductive polymer composites

Yinjia Yan,Yixue Jiang,Evelyn Ling Ling Ng,Yanni Zhang,Cally Owh,Fuke Wang,Qing Song,Tao Feng,Biao Zhang,Peng Li,Xian Jun Loh,Siew Yin Chan,Benjamin Qi Yu Chan

DOI: https://doi.org/10.1016/j.mtadv.2022.100333

IF: 9.918

2022-12-12

Materials Today Advances

Abstract:Electrically conductive polymer composites have sparked considerable interest in the research community due to their unique advantages that come from combining regular polymers with the electronic properties of metals or semiconductors in a synergistic manner. Additive manufacturing (AM) offers promising prospects in the realm of conductive polymer composites by allowing for greater design flexibility, more complicated shapes, and rapid manufacturing. In addition, a rising number of additive manufacturing (AM) methods, including material extrusion, vat photopolymerization, material and binder jetting, powder bed fusion, and sheet lamination are now available for the 3D printing of conductive polymer composites. In this article, we present an insight into current research advances in the field of conductive polymer composites developed for additive manufacturing, which accelerate the design and development of 3D printable electrical devices. We examine various AM processes in terms of their respective limitations, address the material requirements and significant breakthroughs in 3D printing of conductive polymer composites, and discuss promising electronic applications – such as flexible electronics, energy storage and conversion devices, etc. This overview concludes with an assessment of potential future directions and themes in this developing area.

materials science, multidisciplinary
Tunable Conductive Composite for Printed Sensors and Embedded Circuits

Habib Nassar,Abhishek Singh Dahiya,Ravinder Dahiya

DOI: https://doi.org/10.1002/aisy.202300075

IF: 7.298

2023-08-19

Advanced Intelligent Systems

Abstract:Tunable conductive polymer composite is developed for printed electronics. Multi‐material fused deposition modeling is used to print and embed the bendable structures which can be used either as sensors or the circuit elements. Tuning of the filler materials, morphologies, and concentrations is studied and used to determine the electrical and mechanical properties of the printed filaments. Multimaterial 3D printing is an attractive route for low‐cost fabrication of electronic systems having different types of embedded devices. Herein, tunable thermoplastic polyurethane (TPU)‐based conductive composite filaments are presented for development of either strain sensors or different circuit elements. The filaments are developed with two filler materials, namely, silver and multiwalled carbon nanotubes (MWCNT). The influences of filler aspect ratio (AR), concentration, functionalization, and morphology on the composites' mechanical, thermal, and electrical properties are studied. Printed tracks of the 10 wt% high‐AR MWCNT/TPU filament exhibit a maximum electrical conductivity of 0.92 S cm−1 and withstand powers >1 W and currents >100 mA. The filament shows negligible change in impedance over the frequency range 1 kHz–1 MHz and a change in the resistance of <5% with 90° bending. Conversely, printed tracks using filaments with 3 wt% low‐AR MWCNT exhibit a change in resistance of ≈30% with 90° bending, allowing a clear distinction between various bending angles, and thus could be used for embedded strain/bend sensors. These results suggest that, with the correct optimization, multimaterial additive manufacturing can be utilized with tunable conductive filaments to fabricate complex 3D electronic systems by constructing reliable circuit tracks, bendable interconnects, and sensors.
Additive manufacturing (3D printing) of electrically conductive polymers and polymer nanocomposites and their applications

Kirstie R. Ryan,Michael P. Down,Nicholas J. Hurst,Edmund M. Keefe,Craig E. Banks

DOI: https://doi.org/10.1016/j.esci.2022.07.003

2022-07-01

eScience

Abstract:Additive manufacturing, or three-dimensional (3D) printing, offers a unique solution for fabricating complex geometries with high tolerances. Currently, many commercial additive manufacturing machines focus on the printing of polymers with limited functionalities. However, conductive polymers (CPs) can be processed to enable the additive manufacturing of conductive, low-density, and low-cost parts for a myriad of applications. This review summarizes the relevant achievements in the additive manufacturing of conductive polymers (CPs) and conductive polymer nanocomposites, with a discussion of the advantages and limitations of processing and printing these materials compared with alternative traditional manufacturing methods and their properties. Finally, the prospective applications of these additive manufacturing printed conductive materials are explored.
Electro-Mechanical Characterisation and Damage Monitoring by Acoustic Emission of 3D-Printed CB/PLA

Laurane Roumy,Thuy-Quynh Truong-Hoang,Fabienne Touchard,Colin Robert,Francisca Martinez-Hergueta

DOI: https://doi.org/10.3390/ma17051047

IF: 3.4

2024-02-25

Materials

Abstract:Even though the influence of the printing direction on the mechanical properties of 3D-printed samples by fused filament fabrication is established in the literature, very little is known about mechanical and electrical coupling. In this study, electrically conductive polylactic acid filled with carbon black particles undergoes monotonic and repeated progressive tensile loading to better understand the influence of the printing direction on the electro-mechanical properties of three-dimensional-printed samples. The objective is to analyse the electro-mechanical behaviour of this composite for its potential application as an actuator. The classical laminate theory is also applied to evaluate the relevance of this theory in predicting the mechanical characteristics of this material. In addition, a comprehensive damage analysis is performed using acoustic emission, infrared thermography, scanning electron microscopy, and X-ray microcomputed tomography imaging. Results show that the degradation of the mechanical and electrical properties is highly influenced by the printing direction. The appearance and development of crazes in 0° filaments are highlighted and quantified. The conclusions drawn by this study underline the interest in using longitudinal and unidirectional printing directions to improve the conductive path within the samples. Furthermore, the evolution of the resistance throughout the experiments emphasizes the need to control the implemented voltage in the design of future electro-thermally triggered actuators.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Crystallization behavior and sensing properties of bio‐based conductive composite materials

Robert Abbel,Angelique F. Greene,Helena Quilter,Jérôme Leveneur,Regis Risani,Maxime Barbier,Mark West,Christophe Collet,Nigel M. Kirby,Mathias Sorieul

DOI: https://doi.org/10.1002/adem.202200959

IF: 3.6

2022-09-22

Advanced Engineering Materials

Abstract:Poly(3‐hydroxyoctanoate) (PHO), a biocompatible polymer with a skin‐like feel produced by bacterial fermentation, is compounded with carbon nanofibers (CNF) or carbon black (CB), respectively, to form flexible, 3D printable, bio‐based conductive composites. Conductivities up to 10 and 3 S/m can be achieved for CNF and CB, respectively, without negatively affecting the composites' processability. Both filler materials act as nucleating agents for PHO crystallization, significantly accelerating this process which is extremely slow for the filler‐free polymer. Mechanical performance, e. g. elastic modulus, is also improved by the addition of CNF or CB. Both types of filler form composites that show a distinct response to mechanical deformation: bending, twisting and stretching (up to 10 % elongation) result in a marked decrease of their electrical resistance (up to 30 %). This phenomenon has been exploited to fabricate a 3D printed strain sensor that can detect flection and extension via a change in resistance. Our results demonstrate the potential of this sustainable biopolymer and its composites for applications in the biomedical space. This article is protected by copyright. All rights reserved.

materials science, multidisciplinary
Manufacturing of Conductive Filaments for 3D/4D Printing through In Situ Polymerization of Biobased Thermoplastic Polyurethane/Multiwall Carbon Nanotube Composites

Eun Joo Shin,Jae Hyun Son,Heon Sang Lee,Sunhee Lee

DOI: https://doi.org/10.1021/acsapm.3c02558

2024-01-18

ACS Applied Polymer Materials

Abstract:Flexible and stretchable conductive filaments are essential in fused deposition modeling in 3D printing, particularly for body sensing applications, as they are directly printable into any desired shape. Such filaments must meet several key criteria: they should be environmentally friendly, soft, highly conductive, and thermally stable during high-temperature 3D/4D printing. In this study, we fabricated biobased thermoplastic polyurethane (TPU)/multiwall carbon nanotube (MWCNT) composites via in situ polymerization, an eco-friendly process that does not require solvents. Furthermore, we used biobased polyol and chain extenders to produce a complex containing ≥62 wt % natural materials. These composites with rheology-controlled properties exhibited exceptional fluidity during the 3D printing process and maintained their shapes under atmospheric conditions. Additionally, we examined their electrical properties by varying the MWCNT content from 2.75 to 3.75 wt %, obtaining the highest conductivity (1.26 × 10–2 S/cm) with 3.75 wt % MWCNTs in TPU (i.e., TPU/MWCNT 3.50). A 3D printed pressure sensor fabricated using TPU/MWCNT 3.50 exhibited a stable piezoresistive sensing ability under 20% repeated compression for 6000 s. Moreover, the TPU/MWCNT 3.25 composite exhibited a shape-memory property at body temperature (i.e., 37 °C). This research promotes the technological development of 4D printing and materials for future multifunctional applications.

polymer science,materials science, multidisciplinary
Selective laser sintering 3D-Printed conductive thermoplastic polyether-block-amide elastomer/carbon nanotube composites for strain sensing system and electro-induced shape memory

Bowen Ding,Yuancheng Zhang,Jiqiang Wang,Shuxiang Mei,Xiaoyin Chen,Siyuan Li,Wei Zhao,Xiaomeng Zhang,Ge Shi,Yanjie He,Zhe Cui,Peng Fu,Xinchang Pang,Minying Liu

DOI: https://doi.org/10.1016/j.coco.2022.101280

IF: 8

2022-11-01

Composites Communications

Abstract:A novel mixed powders made up of laboratory-made thermoplastic polyether-block-amide (TPAE) and multiwalled carbon nanotubes (MWCNTs) for the selective laser sintering (SLS) 3D printing have been prepared through an environment-friendly approach and the carbon nanotube conductive network structure is established in the SLS-processed nanocomposite devices. The electrical properties, strain sensing property and electro-induced shape memory effect of flexible TPAE/MWCNTs nanocomposites are fully investigated. The conductivity of TPAE/MWCNTs nanocomposites increases as the MWCNTs content increases owing to the interconnected MWCNTs conductive network. During compressing test with different deformation strain and speed, the SLS-processed flexible sensor exhibits a regular, fast, sensitive and stable cyclic response which shows its great potential for artificial electronic skin, human-machine interface and health monitoring. The TPAE-5.0C nanocomposite also possessed an excellent shape recovery ability during electro-induced shape memory cycle which was triggered by Joule heat under DC voltage. The MWCNTs-TPAE powder prepared here provides a novel material for SLS 3D-printing and the SLS-processed devices with outstanding performance and multiple functions will be very useful for developing flexible and lightweight wearables in the future.

materials science, composites
Design and 3D printing of a capacitive sensor for biomedical applications

Toluwalase Agbesoyin,Lokesh K. Saharan

DOI: https://doi.org/10.1117/12.2630973

2022-04-18

Abstract:Sensors detect a change in a physical parameter around them and convert it to a measurable signal that can be construed and analyzed for further applications such as automation, wearable devices, human-machine interfaces, and medical devices, among countless other applications. For example, sensors in the biomedical field help to detect the physiological course of a body. Conventionally sensors are produced using photolithography and screen printing. These conventional methods are limited by the complexity and flexibility in manufacturing the sensors. But, additive manufacturing presents a flexible option to produce the sensors and integrate them into structures as a single unit. This paper shows an extrusion-based 3D printing method to print sensors using conductive filaments. A comb-shaped capacitive sensor was 3D printed using commercially available conductive filament on a 3D printed PLA substrate. Printing two different materials with different properties always remains a challenge in FDM, so this paper also explains the stepwise process for printing a conductive composite material along with a thermoplastic. Further experimental characterization of the filament and sensor was also performed. This paper compares the electrical properties of the feedstock and 3D printed parts to understand the impact of extrusion on the material. A custom-made experimental setup was designed to characterize the sensor. One of the challenges is the low melting point of 3D printed parts, limiting their use to low-power applications. However, most biomedical sensing applications are low power, so these sensors remain suitable for such applications. Hence, in the end, the authors have explored the viability of the integration of these 3D printed sensors with medical implants to manufacture smart biomedical devices.
Development of Flexible and Conductive Immiscible Thermoplastic/Elastomer Monofilament for Smart Textiles Applications Using 3D Printing

Prisca Aude Eutionnat-Diffo,Aurélie Cayla,Yan Chen,Jinping Guan,Vincent Nierstrasz,Christine Campagne

DOI: https://doi.org/10.3390/polym12102300

IF: 5

2020-10-08

Polymers

Abstract:3D printing utilized as a direct deposition of conductive polymeric materials onto textiles reveals to be an attractive technique in the development of functional textiles. However, the conductive fillers—filled thermoplastic polymers commonly used in the development of functional textiles through 3D printing technology and most specifically through Fused Deposition Modeling (FDM) process—are not appropriate for textile applications as they are excessively brittle and fragile at room temperature. Indeed, a large amount of fillers is incorporated into the polymers to attain the percolation threshold increasing their viscosity and stiffness. For this reason, this study focuses on enhancing the flexibility, stress and strain at rupture and electrical conductivity of 3D-printed conductive polymer onto textiles by developing various immiscible polymer blends. A phase is composed of a conductive polymer composite (CPC) made of a carbon nanotubes (CNT) and highly structured carbon black (KB)- filled low-density polyethylene (LDPE) and another one of propylene-based elastomer (PBE) blends. Two requirements are essential to create flexible and highly conductive monofilaments for 3D-printed polymers onto textile materials applications. First, the co-continuity of both the thermoplastic and the elastomer phases and the location of the conductive fillers in the thermoplastic phase or at the interface of the two immiscible polymers are necessary to preserve the flexibility of the elastomer while decreasing the global amount of charges in the blends. In the present work based on theoretical models, when using a two-step melt process, the KB and CNT particles are found to be both preferentially located at the LDPE/PBE interface. Moreover, in the case of the two-step extrusion, SEM characterization showed that the KB particles were located in the LDPE while the CNT were mainly at the LDPE/PBE interface and TEM analysis demonstrated that KB and CNT nanoparticles were in LDPE and at the interface. For one-step extrusion, it was found that both KB and CNT are in the PBE and LDPE phases. These selective locations play a key role in extending the co-continuity of the LDPE and PBE phases over a much larger composition range. Therefore, the melt flow index and the electrical conductivity of monofilament, the deformation under compression, the strain and stress and the electrical conductivity of the 3D-printed conducting polymer composite onto textiles were significantly improved with KB and CNT-filled LDPE/PBE blends compared to KB and CNT-filled LDPE separately. The two-step extrusion processed 60%(LDPE16.7% KB + 4.2% CNT)/40 PBE blends presented the best properties and almost similar to the ones of the textile materials and henceforth, could be a better material for functional textile development through 3D printing onto textiles.

polymer science
Mechanical Properties of Additively Manufactured Polymeric Materials—PLA and PETG—For Biomechanical Applications

Rui F. Martins,Ricardo Branco,Miguel Martins,Wojciech Macek,Zbigniew Marciniak,Rui Silva,Daniela Trindade,Carla Moura,Margarida Franco,Cândida Malça

DOI: https://doi.org/10.3390/polym16131868

IF: 5

2024-06-30

Polymers

Abstract:The study presented herein concerns the mechanical properties of two common polymers for potential biomedical applications, PLA and PETG, processed through fused filament fabrication (FFF)—Material Extrusion (ME). For the uniaxial tension tests carried out, two printing orientations—XY (Horizontal, H) and YZ (Vertical, V)—were considered according to the general principles for part positioning, coordinates, and orientation typically used in additive manufacturing (AM). In addition, six specimens were tested for each printing orientation and material, providing insights into mechanical properties such as Tensile Strength, Young's Modulus, and Ultimate Strain, suggesting the materials' potential for biomedical applications. The experimental results were then compared with correspondent mechanical properties obtained from the literature for other polymers like ASA, PC, PP, ULTEM 9085, Copolyester, and Nylon. Thereafter, fatigue resistance curves (S-N curves) for PLA and PETG, printed along 45°, were determined at room temperature for a load ratio, R, of 0.2. Scanning electron microscope observations revealed fibre arrangements, compression/adhesion between layers, and fracture zones, shedding light on the failure mechanisms involved in the fatigue crack propagation of such materials and giving design reference values for future applications. In addition, fractographic analyses of the fatigue fracture surfaces were carried out, as well as X-ray Computed Tomography (XCT) and Thermogravimetric (TGA)/Differential Scanning Calorimetric (DSC) tests.

polymer science
Multifiller carbon nanotube, graphene, and carbon black composite filaments: A path to versatile electromaterials

Sandra Lepak-Kuc,Łukasz Nowicki,Agnieszka Lekawa-Raus,Malgorzata Jakubowska

DOI: https://doi.org/10.1557/s43577-024-00757-y

IF: 5

2024-07-31

MRS Bulletin

Abstract:Addressing the growing demand for conductive and flexible composites, this research focuses on producing thermoplastic composite fibers made of polyurethane and carbon nanomaterials featuring the highest possible electrical conductivity. Based on a recently developed methodology enabling the formation of very high filler contents of 40% w/w, this work presents a systematic investigation of the role of all the materials used during the manufacturing process and selects the materials that ensure the best electrical performance. The results show that the highest electrical conductivity and current-carrying capacities are obtained when dimethylformamide is used as a solvent, and small amounts of AKM surfactant aid the de-agglomeration of carbon nanomaterials. It is also shown that the hybridization of MWCNTs filler with graphene nanoplatelets and small amounts of carbon black is beneficial for the electrical properties. However, the highest performance is achieved with SWCNTs as fillers, exhibiting two orders of magnitude higher electrical conductivities of 6.17 × 104 S/m. The article presents a pioneering exploration into the synthesis and application of a novel composite material. This research significantly impacts the field of electromaterials by introducing a cutting-edge approach that leverages the synergistic properties of carbon nanotubes, graphene, and carbon black within a single filament. The impact of this research extends beyond the laboratory, influencing the development of next-generation materials that bridge the gap between conventional materials and advanced nanomaterials. The presented composite filaments open avenues for the creation of innovative devices and systems that demand good mechanical strength, electrical conductivity, and thermal stability. Moreover, the versatility of these filaments allows for the optimization of materials properties, enabling customization based on specific application requirements. In addition to its technological significance, the paper contributes to sustainability efforts by facilitating the production of lightweight, energy-efficient materials. The insights provided by this research have the potential to reshape the landscape of materials science, inspiring further exploration and innovation in the quest for versatile and high-performance electromaterials.

materials science, multidisciplinary,physics, applied
Material selection considerations for 3D printing of electrically conductive polymer composites: A review

Sanjeev Kumar Mahato,Vivek Kumar Gupta,Atish Kumar,Narendra Kumar,Rajeev Trehan,Ravi Pratap Singh

DOI: https://doi.org/10.1016/j.matpr.2023.07.185

2023-07-26

Materials Today: Proceedings

Abstract:In the last few decades, electrically conductive materials for 3D printing have been investigated extensively and had undergone successive advancements. 3D printing of electrically conductive materials is an emerging field with broad applications in electronics, sensors, and energy storage. Thus, the current article provides an overview of material selection considerations for electrically conductive 3D printing. Various types of polymer materials used in 3D printing are also discussed in this article. However, the main emphasis of this research is to investigate the capabilities of the polymer when combined with various types of electrically conductive filler materials for a 3D printing application. Finally, the review concludes with insights into the potential future advancements of electrically conductive 3D printing, including its possible applications. In addition, the paper highlights the limitations, challenges, and future scope that currently exist in this field.
Investigation of electrical, electromagnetic interference shielding and tensile properties of 3D-printed acrylonitrile butadiene styrene/carbon nanotube composites

Amir Hossein Maleki,Abbas Zolfaghari

DOI: https://doi.org/10.1177/08927057231216736

IF: 3.0272

2023-11-18

Journal of Thermoplastic Composite Materials

Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Conductive polymer composites (CPCs) are manufactured by compounding conductive particles with a polymer matrix. There are many applications where they are used, including light-weight applications requiring both electrical and heat conductivity. Carbon nanotubes (CNTs) have been accepted as common materials to accomplish this goal. As part of this research, a material extrusion additive manufacturing (AM) process was utilized to create nanocomposites by a 3D-printing technique. Multi-wall carbon nanotubes (MWCNTs) were mixed in 1, 3 and 6 wt fractions with acrylonitrile butadiene styrene (ABS) and extruded in filament form. Three-dimensionally printed specimens were used to evaluate electrical, electromagnetic interference shielding effectiveness (EMI SE) and tensile properties. The electrical conductivity of the material was 26 times greater than that of ABS. In the X-band of electromagnetic waves, EMI SE's reflected and absorbed portions increased respectively 4 and 16 times. The tensile strength and modulus were enhanced by 15% and 9%, respectively. On composite specimens, microwave heat treatment was applied. There is less void space between the rasters and layers, which helps improve tensile properties. Additionally, 3D-printed specimens were tested for melt flow rate (MFR) and dynamic mechanical behaviour. The nozzle has experienced some wear due to the intrinsic abrasive nature of CNTs.

materials science, composites
Thermoplastic elastomer composite filaments for strain sensing applications extruded with a fused deposition modelling 3D printer

Antonia Georgopoulou,Tutu Sebastian,Frank Clemens

DOI: https://doi.org/10.1088/2058-8585/ab9a22

IF: 3.1

2020-07-24

Flexible and Printed Electronics

Abstract:The use of thermoplastic elastomers with conductive fillers enables one to produce strain sensors in a variety of shapes and forms using thermoplastic processing routes. However, some methods of thermoplastic processing are costly and require long production times. Filament printing, an additive manufacturing route that still exhibits a high annual growth rate, is a cost- and time-efficient method of additive processing. In this study a commercial conductive thermoplastic polyurethane (TPU) based fused deposition modelling (FDM) filament and a styrenic block copolymer (TPS) compound were extruded through two different FDM-based nozzle sizes, using an FDM 3D printer. The TPU material could only be extruded through a 0.5 mm orifice; using a lower nozzle diameter resulted in a non-elastic brittle filament. For the TPS material it was possible to produce filaments with diameters of 0.3 mm and 0.5 mm. In all dynamic tests, the extruded commercial piezoresistive TPU filament either showed plastic deformation at higher elongation, which resulted in resistance uncertainty at low strain, or a secondary peak in the resistivity measurement. For the TPS material, mainly the relaxation of the material resulted in lagging of the resistive value at low strain, because of the buckling of the fiber. Using combined dynamic and static measurements, a reproducible signal could be achieved with the TPS-based material, while the TPU-based material could not be used as a sensor in this area of strains.

materials science, multidisciplinary
Electrically conductive filament for 3D-printed circuits and sensors

Sen Wai Kwok,Kok Hin Henry Goh,Zer Dong Tan,Siew Ting Melissa Tan,Weng Weei Tjiu,Je Yeong Soh,Zheng Jie Glenn Ng,Yan Zhi Chan,Hui Kim Hui,Kuan Eng Johnson Goh

DOI: https://doi.org/10.1016/j.apmt.2017.07.001

IF: 8.663

2017-12-01

Applied Materials Today

Abstract:3D printing is a unique technology that potentially offers a high degree of freedom for the customization of practical products that incorporate electrical components, such as sensors in wearable applications. The availability of inexpensive, reliable, electrically conductive material will be indispensable in the fabrication of such circuits and sensors before the full potential of 3D printing for customized products incorporating electrical elements can be realized. To date, 3D printable conductive filaments with sufficiently high conductivities to fabricate practical circuits remain lacking for fused deposition modeling. Herein, we describe the fabrication, characterization, stress testing, and application of a low-cost thermoplastic conductive composite that has been processed into filament form for 3D printing. Results from stress tests show that the electrical properties of our composites are stable under exposure to sunlight over 1 month and there was no observable degradation in electrical resistance when used at 12V (AC) for 7 days. Practical circuits were 3D printed using filaments with resistivity of ∼5×10−3 Ωm, and powered up with a 9V battery. A plastic thermometer and a flex sensor were prototyped to illustrate the potential of this material for sensing applications, for example, in customized wearables.

materials science, multidisciplinary
Softening, Conformable, and Stretchable Conductors for Implantable Bioelectronics Interfaces

Pedro E. Rocha‐Flores,Chandani Chitrakar,Ovidio Rodriguez‐Lopez,Yao Ren,Alexandra Joshi‐Imre,Ankit R. Parikh,Ahmet S. Asan,James R. McIntosh,Aldo Garcia‐Sandoval,Joseph J. Pancrazio,Melanie Ecker,Hongbing Lu,Jason B. Carmel,Walter E. Voit

DOI: https://doi.org/10.1002/admt.202401047

IF: 6.8

2024-12-05

Advanced Materials Technologies

Abstract:This study presents a material‐design‐processing combo for stretchable conductors and implantable devices to enhance communication between the body and external electronics. Results show improved conformability and stretchability with stable electrical performance. Electrical resistance remained below 1.5× initial resistance at 150% strain and after 10 000 fatigue cycles. Additionally, these optimized conductors are demonstrated in an animal spinal cord stimulation device. Neural implantable devices serve as electronic interfaces facilitating communication between the body and external electronic systems. These bioelectronic systems ideally possess stable electrical conductivity, flexibility, and stretchability to accommodate dynamic movements within the body. However, achieving both high electrical conductivity and mechanical compatibility remains a challenge. Effective electrical conductors tend to be rigid and stiff, leading to a substantial mechanical mismatch with bodily tissues. On the other hand, highly stretchable polymers, while mechanically compatible, often suffer from limited compatibility with lithography techniques and reduced electrical stability. Therefore, there exists a pressing need to develop electromechanically stable neural interfaces that enable precise communication with biological tissues. In this study, a polymer that is softening, flexible, conformal, and compatible with lithography to microfabricate perforated thin‐film architectures is utilized. These architectures offer stretchability and improved mechanical compatibility. Three distinct geometries are evaluated both mechanically and electrically under in vitro conditions that simulate physiological environments. Notably, the Peano structure demonstrates minimal changes in resistance, varying less than 1.5× even when subjected to ≈150% strain. Furthermore, devices exhibit a maximum mechanical elongation before fracture, reaching 220%. Finally, the application of multi‐electrode spinal cord leads employing titanium nitride for neural stimulation in rat models is demonstrated.

materials science, multidisciplinary
Investigating Conductive Polymer Composites Developed Using Acrylonitrile Butadiene Styrene/Graphene/Multi-walled Carbon Nanotubes for Effective Thermal Management

Suraj Vairagade,Narendra Kumar,Ravi Pratap Singh

DOI: https://doi.org/10.1007/s11665-024-10323-x

IF: 2.3

2024-10-25

Journal of Materials Engineering and Performance

Abstract:This research study examines the effects of carbon-based nanofillers, graphene (GNP), and multiwalled carbon nanotubes (MWCNT) on the properties of acrylonitrile butadiene styrene (ABS) composites in different ratios. The composite films were fabricated using a solution mixing method, and their fabrication was optimized using Taguchi's design of experiments technique. The thermal conductivity of various ABS composite films was assessed using a newly developed experimental setup designed for one-dimensional heat conduction. Each conductive film underwent SEM, TGA, and SSTM to evaluate morphology and thermal properties. SEM analysis confirmed the uniform dispersion of nanofillers within the polymer matrix. Furthermore, the thermal analysis demonstrated a significant improvement of approximately 11.14% in degradation temperature and 10.39% in decomposition temperature for composition ABS/3.5/GNP/3.5/MWCNT. The highest thermal conductivity ( k ) of 0.825 W/mK was achieved at 7 wt.% of GNP and MWCNT nanofillers. The composite film ABS/GNP/MWCNT with compositions of 93/3.5/3.5 wt.% exhibited a 358.33% increase in thermal conductivity compared to pure ABS material. The observations highlighted in this study have been used to develop new novel materials and thermally conductive filaments to fabricate microchannel heat exchangers for efficient thermal management applications.

materials science, multidisciplinary
Morphological, Rheological and Electromagnetic Properties of Nanocarbon/Poly(lactic) Acid for 3D Printing: Solution Blending vs. Melt Mixing

Giovanni Spinelli,Patrizia Lamberti,Vincenzo Tucci,Rumiana Kotsilkova,Sonia Tabakova,Radost Ivanova,Polya Angelova,Verislav Angelov,Evgeni Ivanov,Rosa Di Maio,Clara Silvestre,Darya Meisak,Alesia Paddubskaya,Polina Kuzhir

DOI: https://doi.org/10.3390/ma11112256

2018-11-13

Abstract:The limitation of poor mechanical stability and difficulties in printing electrically conductive components can be overcome owing to the recent introduction of nanotechnology into the field of additive manufacturing (AM) and the consequent development of nonconventional polymer nanocomposites suitable for 3D printing. In the present work, different weight percentages (up to 6 wt % in total) of carbon-based nanostructures-multiwalled carbon nanotubes (MWCNTs), graphene nanoplatelets (GNPs), and a combination of both fillers (MWCNTs/GNPs)-were incorporated into poly(lactic) acid (PLA, Ingeo™) in an attempt to overcome several limitations of conventional 3D manufacturing based on insulating materials. Solution blending and melt mixing were the two fabrication methods adopted for preparation of the samples under test. A comparison of the morphological, rheological, and electrical properties of the resulting nanocomposites was carried out. Moreover, for the same weight concentrations, the influence of physical and geometrical features (i.e., functionalization and aspect ratio) of the embedded fillers was also investigated. Rheological methods were applied to control the quality of fillers dispersion in PLA matrix. The rheological percolation threshold was considered as reference in order to evaluate the internal structure of nanodispersions. TEM visualization, combined with rheological characterizations, was used for efficient control of the nanofiller dispersion. DC characterization revealed that lower electrical percolation thresholds and higher values of electrical conductivity were achieved using fillers with a larger aspect ratio and melt mixing, respectively. Moreover, given the possibility of obtaining complex and appropriate shapes for electromagnetic compatibility (EC) applications, electromagnetic (EM) response of the nanocomposites at the highest filler concentration was investigated in GHz and THz regions. It was found that the electromagnetic shielding efficiency (EMI) of nanocomposites strongly depended on the aspect ratio of the nanofillers, whereas the type of processing technique did not have a significant effect. Therefore, a careful choice of methods and materials must be made to address the final application for which these materials and further 3D printed architectures are designed.

[ENZYMATIC BETA SUBSTITUTION OF PHOSPHOSERINE AND CYSTEINE BY SULFITE. SOME REMARKS ON THE MECHANISM OF BETA SUBSTITUTION IN THE PRESENCE OF PYRIDOXAL PHOSPHATE ENZYMES].

Development of Mechanically Enhanced Polycaprolactone Composites by a Functionalized Titanate Nanofiller for Melt Electrowriting in 3D Printing.

The Effect of Printing Parameters on Electrical Conductivity and Mechanical Properties of PLA and ABS Based Carbon Composites in Additive Manufacturing of Upper Limb Prosthetics

Progress and opportunities in additive manufacturing of electrically conductive polymer composites

Tunable Conductive Composite for Printed Sensors and Embedded Circuits

Additive manufacturing (3D printing) of electrically conductive polymers and polymer nanocomposites and their applications

Electro-Mechanical Characterisation and Damage Monitoring by Acoustic Emission of 3D-Printed CB/PLA

Crystallization behavior and sensing properties of bio‐based conductive composite materials

Manufacturing of Conductive Filaments for 3D/4D Printing through In Situ Polymerization of Biobased Thermoplastic Polyurethane/Multiwall Carbon Nanotube Composites

Selective laser sintering 3D-Printed conductive thermoplastic polyether-block-amide elastomer/carbon nanotube composites for strain sensing system and electro-induced shape memory

Design and 3D printing of a capacitive sensor for biomedical applications

Development of Flexible and Conductive Immiscible Thermoplastic/Elastomer Monofilament for Smart Textiles Applications Using 3D Printing

Mechanical Properties of Additively Manufactured Polymeric Materials—PLA and PETG—For Biomechanical Applications

Multifiller carbon nanotube, graphene, and carbon black composite filaments: A path to versatile electromaterials

Material selection considerations for 3D printing of electrically conductive polymer composites: A review

Investigation of electrical, electromagnetic interference shielding and tensile properties of 3D-printed acrylonitrile butadiene styrene/carbon nanotube composites

Thermoplastic elastomer composite filaments for strain sensing applications extruded with a fused deposition modelling 3D printer

Electrically conductive filament for 3D-printed circuits and sensors

Softening, Conformable, and Stretchable Conductors for Implantable Bioelectronics Interfaces

Investigating Conductive Polymer Composites Developed Using Acrylonitrile Butadiene Styrene/Graphene/Multi-walled Carbon Nanotubes for Effective Thermal Management

Morphological, Rheological and Electromagnetic Properties of Nanocarbon/Poly(lactic) Acid for 3D Printing: Solution Blending vs. Melt Mixing