Abstract:Development and testing of continuous polyamide fiber reinforced polycaprolactone composites. Polycaprolactone (PCL) is a biodegradable material that has received significant attention in the last decade. It is characterized by low toxicity and biocompatibility, making it a common choice as a tissue scaffold material in the medical field. However, its low mechanical performance has limited its application. This work focuses on the development and characterization of a PCL based printing material reinforced with continuous polyamide 6 fiber (PA6/PCL). PA6/PCL filaments were produced through a hot melt impregnation process. A custom fused deposition modeling (FDM) printer was used to print the PA6/PCL composites. Thermal analysis was conducted to assess the thermal properties of the composite materials. Mechanical tests were performed to evaluate the mechanical properties of the printed composites and determine the effect of PA6 continuous fiber on their mechanical properties. The study showed that adding continuous PA6 fibers significantly improved the strength and modulus of PCL. When 7.9 wt% PA6 fiber is added, the tensile strength of PCL printed parts increased by more than 300%, and the tensile modulus increased by 36%. In addition, flexure strength increased by 130% and flexure modulus by 150%. Scanning electron microscope was used to study the fracture surfaces of the composites and it was found that the main failure modes were fiber fracture and debonding between fiber and matrix. This research demonstrates that adding continuous PA6 fibers tremendously enhances the mechanical properties of printed PCL parts. This novel composite material can potentially broaden the applications of FDM technology and provide more material options for biomedical applications. Highlight A novel FDM composite material with excellent tensile strength was developed. Continuous PA6 fiber has been used to reinforce PCL. A new test method was developed for evaluating filament material for FDM. The tensile strength of PCL is improved by 300% when 7.9 wt% PA6 fiber is added. The printability of the FDM composite material has been confirmed.

Printability and mechanical behaviors of continuous polyamide fiber reinforced polycaprolactone composites

Development of Mechanically Enhanced Polycaprolactone Composites by a Functionalized Titanate Nanofiller for Melt Electrowriting in 3D Printing.

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Self-monitoring Continuous Carbon Fiber Reinforced Thermoplastic Based on Dual-Material Three-Dimensional Printing Integration Process

Additive manufacturing of high‐strength polyamide 6 composites reinforced with continuous carbon fiber prepreg

Tensile properties and corrosion resistance of PCL ‐based 3D printed composites

Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites

Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces

Fused-Deposition Modeling 3D Printing of Short-Cut Carbon-Fiber-Reinforced PA6 Composites for Strengthening, Toughening, and Light Weighting

3D printing of a continuous fiber-reinforced composite based on a coaxial Kevlar/PLA filament

An investigation into mechanical properties of a 3D printed two-matrix continuous fiber composites with multi-cavity structure

Study on 3D printing process of continuous polyglycolic acid fiber-reinforced polylactic acid degradable composites

High-content continuous carbon fiber reinforced multifunctional prepreg filaments suitable for direct 3D-printing

3D‐printing continuous plant fiber/polylactic acid composites with lightweight and high strength

Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer

Process parameters and mechanical properties of continuous glass fiber reinforced composites-polylactic acid by fused deposition modeling

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

A Continuous Fiber-Reinforced Additive Manufacturing Processing Based on PET Fiber and PLA

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Fabrication of Solvent-Free PCL/β-TCP Composite Fiber for 3D Printing: Physiochemical and Biological Investigation

Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication