Abstract:3D-printed carbon fiber composites hold significant potential in aerospace applications because of their lightweight, high strength and complex structure fabrication capabilities. However, additive manufacturing characteristics such as high porosity, anisotropy and continuous fiber content significantly affect the mechanical properties of printed parts. The aim of this study is to investigate the influence of hybrid printing of short and continuous carbon fibers on the mechanical properties and failure mechanisms of composites and to develop a model to predict elastic properties considering porosity. First, mechanical testing and characterization of short and continuous fiber reinforced polyamide (nylon) print filaments are performed. The results indicate that the elastic modulus and ultimate strength of continuous carbon fiber filaments reach 60 GPa and 1500 MPa, respectively, while the strength and elastic modulus of short carbon fiber filaments reach 60 MPa and 1 GPa, respectively. Then tensile specimens with different continuous fiber orientations and different continuous fiber placement sequences are printed and tested using a multi-material 3D printing technique. The specimens are characterized before and after testing using scanning electron microscopy and microscopy to assess the porosity and failure mechanisms of specimens with different configurations. The results show that the mechanical properties of the printed parts are much lower than those of the print filaments, which proves the serious negative impact of the material extrusion process on the mechanical properties of the printed structural parts. Finally, an analytical method for predicting the elastic behavior of printed composites is developed by introducing the porosity factor in the volume-averaged stiffness model. For continuous and short fiber filled composites with different fiber contents and printing orientations, the predicted results are in agreement with the experiments, and the prediction error is greatly reduced from 30% to less than 5%.

Flexural properties of three-dimensional printed continuous wire polymer composites

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Additive manufacturing of Continuous Wire Polymer Composites

An investigation into mechanical properties of a 3D printed two-matrix continuous fiber composites with multi-cavity structure

3D printed continuous wire polymer composites strain sensors for structural health monitoring

Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces

A comparative study on the electromechanical properties of 3D-Printed rigid and flexible continuous wire polymer composites for structural health monitoring

Self-monitoring Continuous Carbon Fiber Reinforced Thermoplastic Based on Dual-Material Three-Dimensional Printing Integration Process

Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous Fiber Reinforced Cement-Based 3D Printed Composites

3D printing of continuous fiber reinforced cellular structural composites for the study of bending performance

Fatigue behavior and electromechanical properties of additively manufactured continuous wire polymer composites for structural health monitoring

Large-scale deformation and damage detection of 3D printed continuous carbon fiber reinforced polymer-matrix composite structures

Mechanical and Energy Absorption Behaviors of 3D Printed Continuous Carbon/kevlar Hybrid Thread Reinforced PLA Composites

Process evaluation, tensile properties, mathematical models, and fracture behavior of 3D printed continuous fiber reinforced thermoplastic composites

Effect of infill density and reinforced perimeters on tensile properties and fracture mechanism of 3D printing carbon fiber–reinforced composite

3D Printing for High Performance Fiber Reinforced Polymer Composites

Investigating the tensile properties of 3D printed semi-woven intraply hybrid composites reinforced with carbon/glass continuous fibres

Investigation of fiber waviness in fused deposition modeling printed continuous fiber-reinforced polymers

Line Width Prediction and Mechanical Properties of 3D Printed Continuous Fiber Reinforced Polypropylene Composites

3D printing of a continuous fiber-reinforced composite based on a coaxial Kevlar/PLA filament

Experimental analysis of 3D printed continuous carbon/glass hybrid fiber reinforced PLA composites: Revealing synergistic mechanical properties and failure mechanisms