Abstract:The effect of partial substitution of Co for Ni on the structure and electrochemical properties of the thus formed La2Mg(Ni1−xCox)9 (x = 0.1–0.5) quaternary alloys was investigated. All alloys are consisted of a main phase with hexagonal PuNi3-type structure and a few impurity phases (mainly La2Ni7 and LaNi). The increase of Co content in the alloys leads to an increase in both the cell volume and the hydride stability, and leads to a noticeable decrease in cell volume expansion rate (ΔV/V) on hydriding. The discharge capacity of the alloys at 50mA/g increases slightly with the increase of Co content and passes though a maximum of 404.5mAh/g at x = 0.2. As the Co content increases, the high-rate dischargeability of the alloy electrodes at 800mA/g (HRD800) decreases sharply from 72.8 (x = 0) to 24.5% (x = 0.5), yet the decrease of HRD800 of the alloy electrodes with lower Co substitution (with x ≤ 0.2) is much milder. The slower decrease of HRD800 (from 72.8 to 64.2%) of the alloys with x from 0 to 0.2 is mainly attributed to the decrease of eletrocatalytic activity for charge-transfer reaction, the more rapid decrease of the alloys with x > 0.2 is mainly attributed to the lowering of the hydrogen diffusion rate in the bulk of alloy. The cycling capacity retention rate (S100) of the alloys increase greatly with increasing of Co content, increasing from 60.2% for the alloy with x = 0 to a much higher value of 87.9% for the alloy with x = 0.5. The improvement in cycling stability is attributed to the lower cell volume expansion on hydriding.

Improved poisoning resistance of Cu-coated LaNiAl alloy prepared by magnetron-sputtering method

Influence of Ni Addition on Corrosion Performance of Medium-temperature Filler Metal with Low Cu Content for Al Brazed Joints

Corrosion Protection of Nd-Fe-B Sintered Magnets by Aluminum Coating

A study on the structure and electrochemical properties of La 2Mg(Ni0.95M0.05)9 (M = Co, Mn, Fe, Al, Cu, Sn) hydrogen storage electrode alloys

Aluminum Co-Deposition via DC Magnetron Sputtering for Enhanced Pitting Resistance of Copper–Nickel Alloys

Enhanced anti-poisoning performance against carbon monoxide of LaNi4.7Al0.3 alloy encapsulated in polymethyl methacrylate

Effect of Co Substitution for Ni on the Structural and Electrochemical Properties of La2Mg(Ni1−xCox)9 (x = 0.1–0.5) Hydrogen Storage Electrode Alloys

The Effect Of Al Substitution For Ni On The Structure And Electrochemical Properties Of Ab(3)-Type La2mg(Ni1-Xalx)(9) (X=0-0.05) Alloys

The structural and electrochemical properties of La2Mg(Ni0.8-xCo0.2Alx)9 (x = 0-0.03) hydrogen storage electrode alloys

Effects of nano-molybdenum coatings on the hydrogen storage properties of La–Mg–Ni based alloys

Influence of Rapid Quenching on the Microstructure and Electrochemical Properties of Co-free LaNi4.92Sn0.33LaNi4.92Sn0.33 Hydrogen Storage Electrode Alloy

Ni-Al Films Induced Surface Modification of La2Mg17 Alloy Leading to Improved Dehydrogenation Properties

Significantly improved hydrogen desorption property of La 2 Mg 17 alloy modified with Ni–Al nanocrystalline

The correlative effects of Al and Co on the structure and electrochemical properties of a La–Mg–Ni-based hydrogen storage electrode alloy

Electrocatalytic activity and electrochemical hydrogen storage of Ni-La alloy prepared by electrodeposition from aqueous electrolyte

Nano-Ni Induced Surface Modification Relevant to the Hydrogenation Performances in La-Mg Based Alloys

La2O3-Modified Nickel-Cobalt Composite Coating As Cathode Materials for Hydrogen Evolution Reaction

Effects of Co Substitution for Ni on Microstructures and Electrochemical Properties of LaNi3.8 Hydrogen Storage Alloys

Corrosion behavior and strengthening mechanism of Ni-Cu alloy coating on Nd-Fe-B magnets

Absorption of poisoned hydrogen from metal hydride under CO+H2 mixture gas for the production of clean, high purity hydrogen

Surface features of the poisoning of lathanium rich mixed rare earth-nickel hydrogen storage material by CO, O/sub 2/, and H/sub 2/O