Abstract:In the coal direct liquefaction process line distribution of finished oil tanks and semifinished oil tanks, corrosion of tank reservoir parts and the gas phase are important. To prove the corrosion‐influencing factors and corrosion processes of various parts of the storage tank, further research was carried out based on the previous research. As the process of corrosion of the tank wall is affected by the sulfur element in oil, the sulfur content in refined oil and semi‐refined oil was analyzed first. The results show that: the sulfur content is high for hydro‐upgrading feed oil and hydro‐stabilizing feed oil, but the sulfur content is low for thick condensed oil and diesel. The tank is mainly made of 16MnR and Q235‐b steel in the process plant. In this article, 16MnR and Q235‐b steel coupons are used for static coupon experiments and electrochemical experiments to determine the influencing factors and processes that affect the corrosion of the reservoir and the gas phase. The static coupon tests show that the corrosion rates are similar for 16MnR and Q235‐b steel coupons in the reservoir location and for the gas‐phase parts. And, the corrosion rates decrease with time. The corrosion rates of 16MnR and Q235‐b steel in hydro‐stabilizing feed oil are relatively high, and the corrosion rates of 16MnR and Q235‐b steel are relatively low, though the difference is not significant. The 16MnR corrosion rate is relatively high in the reservoir location compared to that of the gas phase. The corrosion rate of Q235‐b steel in the gas‐phase space is relatively higher than that of the reservoir location. Electrochemical tests show that the corrosion rates of 16MnR and Q235‐b steel in hydro‐stabilizing feed oil are higher than those in the other three oils. Finally, the effect of temperature on the corrosion rate was studied by the static coupon experiment. The results show that the corrosion rates of 16MnR steel and Q235‐b steel in the four kinds of oil products increase first and then decrease when the temperature changes from 70 to 110°C. The corrosion rate reaches the maximum when the temperature is 90°C. The research of this article can provide some technical support and help for the corrosion protection and safety design of oil tanks in the direct liquefaction process. © 2018 American Institute of Chemical Engineers Process Process Saf Prog 37:419–426, 2018

Water Separation and Formation of Cells with Differential Aeration as Factors Controlling Corrosion of Steel Pipelines in a Crude Oil Storage Facility

Experiments and Molecular Simulations to Study the Effect of Surface-Active Compounds in Mixtures of Model Oils on CO2 Corrosion during Intermittent Oil-Water Wetting

Factors Influencing the CO2 Corrosion Pattern of Oil–Water Mixed Transmission Pipeline during High Water Content Period

A study on the microbial biocorrosion behavior of API 5 L X65 carbon steel exposed to seawater

Experimental Investigation on Corrosion Behavior of X80 Pipeline Steel under Carbon Dioxide Aqueous Conditions

Methanogenic Archaea and Sulfate Reducing Bacteria Induce Severe Corrosion of Steel Pipelines after Hydrostatic Testing

Investigating the effects of environment, corrosion degree, and distribution of corrosive microbial communities on service-life of refined oil pipelines

Microbial corrosion behavior of pipeline steels in simulation environment of natural gas transportation pipeline

Accelerated corrosion of pipeline steel in the presence of Desulfovibrio desulfuricans biofilm due to carbon source deprivation in CO2 saturated medium

Experimental Investigation on Oil-Water Two-phase Flow Internal Corrosion Properties in X80 High-strength Steel Pipelines

Corrosion of pipeline steel in dense phase CO2 containing impurities: A critical review of test methodologies

Impact of Prolonged Exposure to Sour Service on the Mechanical Properties and Corrosion Mechanism of NACE Carbon Steel Material Used in Wet Sour Gas Multiphase Pipeline

Investigation of Supercritical CO2 Corrosion Behavior of X80 Carbon Steel in Pipelines: an in Situ Experimental and DFT Study

Corrosion Behavior of Oil Tube Steels under Conditions of Multiphase Flow Saturated with Super-Critical Carbon Dioxide

Effect of Flow on the Corrosion Behavior of Pipeline Steel in Supercritical CO2 Environments with Impurities

Experimental study on corrosion of 20# steel in oil-water stratified liquids based on wire beam electrode technique

A Mechanistic Model for Pipeline Steel Corrosion in Supercritical CO2–SO2–O2–H2O Environments

Effects of Pipeline Corrosion on the Injection Water Quality of Low Permeability in Oilfield

Corrosion Mechanism and Anti-corrosion Technology of Oil Tanks

Study of corrosion of oil tank parts and gas‐phase space in different tanks

Effect Of Temperature On Corrosion Behaviour Of X70 Steel In High Pressure Co2/So2/O-2/H2o Environments