Abstract:Purpose - The purpose of this paper is to present an optimal posture evaluation model to control the assembly gaps in aircraft wing assembly. The gaps between two mating surfaces should be strictly controlled in precision manufacturing. Oversizing of gaps will decrease the dimensional accuracy and may reduce the fatigue life of a mechanical product. To reduce the gaps and keep them within tolerance, the relative posture (orientation and position) of two components should be optimized in the assembly process. Design/methodology/approach - Based on the step alignment strategy, i.e. preliminary alignment and refined alignment, the concept of a small posture transformation (SPT) is introduced. In the preliminary alignment, an initial posture is estimated by a set of auxiliary locating points, with which the components can be quickly aligned near each other. In the refined alignment, the assembly gaps are calculated and the formulation of the gaps with component posture is derived by the SPT. A comprehensive weighted minimization model with gap tolerance constraints is established for redistributing the gaps in multi-regions. Powell-Hestenes-Rockafellar optimization, Singular Value Decomposition and K-Dimensional tree searching are introduced for the solution of the optimal posture for localization. Findings - Using the SPT, the trigonometric posture transformation is linearized, which benefits the iterative solution process. Through the constrained model, overall gaps are minimized and excess gaps are controlled within tolerance. Practical implications - This method has been tested with simulated model data and real product data, the results of which have shown efficient coordination of mating components. Originality/value - This paper proposed an optimal posture evaluation method for minimizing the gaps between mating surfaces through component adjustments. This will promote the assembly automation and variation control in aircraft wing assembly.

Buckling optimization of variable stiffness composite wing boxes with manufacturing defects

Design and Optimization of Variable Stiffness Composite Cylinders with the Consideration of Manufacturing Interaction

An Assembly Gap Control Method Based on Posture Alignment of Wing Panels in Aircraft Assembly

Shimming Design and Optimal Selection for Non-Uniform Gaps in Wing Assembly

Post-buckling optimization of bending-induced variable stiffness composite cylinders considering worst geometric imperfections

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Optimization Design and Analysis of Composite Wing Skins

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Buckling optimization of variable stiffness composite cylinders by using multi-fidelity surrogate models

Design optimization of variable stiffness composites by using multi-fidelity surrogate models

Isogeometric Method for Buckling Prediction and Post-Buckling Analysis of Variable Stiffness Composite Underwater Pressure Shell

Application Research in Multi-Objective Constrained Optimization of Composite Wing Structure

Benchmark Solution of Laminated Beams with Bonding Imperfections

Design and optimization of composite sub-stiffened panels

Integrated optimization of ply number, layer thickness, and fiber angle for variable-stiffness composites using dynamic multi-fidelity surrogate model

Analysis and experimental evaluation framework for buckling and post-buckling of composite stiffened panels

Linear buckling topology optimization of reinforced thin-walled structures considering uncertain geometrical imperfections

Postbuckling analysis and optimization of composite laminated panels using a novel perturbation-based approximation FE method

A Optimization Technique for the Composite Strut Using Genetic Algorithms

Tolerance Simulation of Thin-Walled C-Section Composite Beam in Wingbox Assembly under Preloading

Buckling Analysis of Variable Stiffness Composite Cylindrical Shells Under Axial Compression Considering Imperfection Sensitivity