Abstract:The axial elongation and springback problems of tube bending need to be solved respectively, to realize the “no allowance bending” and “flange welding prior to bending” processes for ship thick-walled tubes. The axial elongation and springback analytical models of the tube bending process are established respectively based on the force balance condition, comprehensively considering the influence law and mechanism of geometric and material intrinsic parameters. The relationships between the axial elongation and forming angle, the bending angle, and forming angle are found respectively. A formula for calculating the start bending point position of the tube is obtained according to the geometric relationship after springback. The finite element (FE) model of the thick-walled tube is established based on the ABAQUS platform; the processes of tube bending and springback are simulated. The accuracy of the established FE model and theoretical analysis models is verified through tube bending experiments. The influence of main process parameters on the axial elongation and springback of the tube bending is analyzed. The results show that for tubes with the same materials, in the scope of engineering application, both the axial elongation and the bending angle have linear relations with the forming angle, and they are not through the origin of the coordinate; the axial elongation of the tube bending increases with the increasing of the forming angle; the springback angle increases with the increasing of the bending angle. At last, the applications of axial elongation and springback law are proposed.

Springback Investigation of a Thick-Walled Tube Under Combined Torsion-Bending and Internal Pressure by Using Continuum Damage Mechanics

Springback after the Lateral Bending of T-Section Rails of Work-Hardening Materials

Springback prediction of titanium tube bending considering Bauschinger effect and Young's modulus variation

Analysis of springback for multiple bending considering nonlinear unloading-reloading behavior, stress inheritance and Bauschinger effect

Springback Analysis for Warm Bending of Titanium Tube Based on Coupled Thermal-Mechanical Simulation

Research on the axial elongation and springback law of thick-walled tubes in cold bending forming

Springback Prediction Model Considering the Variable Young’s Modulus for the Bending Rectangular 3A21 Tube

An application of fully coupled ductile damage model considering induced anisotropies on springback prediction of advanced high strength steel materials

An Analytic Model for TC4 Titanium Alloy Tube Bending Springback Considering Temperature Effects

Springback Angle and Plastic Elongation Prediction of Thin-Walled Tube Bending by FEM

Springback Prediction Using the Split-Ring Test Based on A Combined Anisotropic Hardening Model

Spiral Metal Tube Multi-Roller Bending Springback Prediction Model Based on Dynamic Deformation Enhancement Analysis

An analytical model for bending and springback of bimetallic sheets

A Model of One-Surface Cyclic Plasticity and Its Application to Springback Prediction

Effect of mechanical properties, microstructure and residual stress on the bending springback behavior of high-strength Al–Mg–Si–Cu alloy tubes

Effect of Internal Pressure on Springback During Low Pressure Tube Hydroforming

Experimental study and numerical simulation on springback of Ti-6Al-4V alloy under hot U-bending

A Method of Constitutive Experiment for Accurate Description of Tube Performance under Rotary-Draw Bending

Development of a new model for plane strain bending and springback analysis

An investigation on springback of L-bending sheet metal forming based on nonlinear elastic unloading

Size Effect on Springback Behavior Due to Plastic Strain Gradient Hardening in Microbending Process of Pure Aluminum Foils