Abstract:As one kind of key lightweight components with enormous quantities and diversities, the bent tubular parts have attracted increasing applications in aerospace, automobile, etc. Thus, how the inevitable springback behaves under different bending specifications should be fully addressed to efficiently achieve the precision forming of various bent tubes. Taking the medium strength thin-walled 6061-T4 Al-alloy tube as the objective, via the deformation theory of plasticity, explicit/implicit FE method and experimental approaches, we explored and clarified the nonlinear springback rules of the tubes and corresponding mechanisms in universal rotary draw bending regarding angular springback and radius growth by deliberately changing the tube diameter D and wall thickness t. The geometry dependent springback behaviors of thin-walled tube upon cold bending are thus revealed: 1) With the increasing of D, the tangent tensile strain increases and the proportional coefficient decreases, which causes the angular springback to decrease, while the radius springback increases due to the larger bending radius. 2) With the increasing of t, the tangent tensile strain decreases and the proportional coefficient increases, resulting in the increase of both angular springback and radius springback. 3) Under the same D/t, the angular springback varies little, while the radius springback increases with the larger diameter D. 4) The D/t can be used as a reasonable nondimensional index to evaluate the springback angle; as to the radius growth, the individual effects of the D and t should be considered. 5) The verification of the above results was conducted by experiments and analytical analysis.

Research on the axial elongation and springback law of thick-walled tubes in cold bending forming

An Analytical Springback Model for Bending of Welded Tube Considering the Weld Characteristics

Establishment of a 3D FE Model for the Bending of a Titanium Alloy Tube

Springback Angle and Plastic Elongation Prediction of Thin-Walled Tube Bending by FEM

Modelling of Springback in Tube Bending: A Generalized Analytical Approach

Springback Law of Thin-Walled 6061-T4 Al-alloy Tube Upon Bending

Coupling Effects of Material Properties and the Bending Angle on the Springback Angle of a Titanium Alloy Tube During Numerically Controlled Bending

Research on Bending Forming Method of Large Diameter-Thickness Ratio Thin-Walled Tubes for Aerospace

Improvement of the accuracy and the computational efficiency of the springback prediction model for the rotary-draw bending of rectangular H96 tube

Springback Prediction of Three-Dimensional Variable Curvature Tube Bending

Geometry-Dependent Springback Behaviors of Thin-Walled Tube Upon Cold Bending

FEM Numerical Analysis of Springback Law of NC Tube Bending

Effects of Process Parameters on Springback of High Strength 21-6-9 Tube Bending Considering Variation of Elastic Modulus

An Analytic Model for Tube Bending Springback Considering Different Parameter Variations of Ti-Alloy Tubes

Springback law of high-strength 21-6-9 stainless steel tube in numerical control bending under different process parameters

Springback Analysis for Warm Bending of Titanium Tube Based on Coupled Thermal-Mechanical Simulation

FEM Modeling and Experimental of NC Bending Process of Thin-Wall Tube with Large Diameter and Small Bending Radius

An Analytic Model for TC4 Titanium Alloy Tube Bending Springback Considering Temperature Effects

Effect of springback on wall thinning and section distortion for high strength TA18 tube in NC bending

A Study of Axial Force and Bending Moment in Tube Numerical Control Bending Based on Finite Element Method

Research on Influencing Factors and Laws of Free-Bending Forming Limit of Tube