Abstract:A novel method for fabricating shape-controlled and well-arrayed heterogeneous nanostructures by altering the melting point of the metal thin film at the nanoscale is proposed. Silver nanofilms (AgNFs) are transformed into silver nanoislands (AgNIs), silver nanoparticles (AgNPs), and silver nanogaps (AgNGs) that are well-ordered and repositioned inside the gold nanoholes (AuNHs) depending on the diameter of the AuNHs, the thickness of the AgNF, and the heating temperature (120–200 °C). This method demonstrates the ability to fabricate uniform, stable, and unique structures with a fast, simple, and mass-producible process. For demonstrating the diverse applicability of the developed structures, high-density AgNGs inside the AuNHs are utilized as surface-enhanced Raman spectroscopy (SERS) substrates. These AgNGs-based SERS substrates exhibit a performance enhancement, which is 1.06 × 10<sup>6</sup> times greater than that of a metal film, with a relative standard deviation of 19.8%. The developed AgNP/AgNI structures are also used as nonreproducible anti-counterfeiting signs, and the anti-counterfeiting/readout system is demonstrated via image processing. Therefore, our method could play a vital role in the nanofabrication of high-demand nanostructures.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18122?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18122</a>.Low-magnification SEM images of the fabricated samples (Figure S1); SEM morphologies of the fabricated heterogeneous nanostructures depending on the heating temperature (120–200 °C) (Figure S2); the morphologies of heterogeneous nanostructures depending on the heating time from 1 to 20 min at an interval of 2 min (Figure S3); low- and high-magnification SEM images of the heterogeneous nanostructures fabricated on the 6 in. wafer (Figure S4); SEM images of the five different specimens fabricated using the same conditions (Figure S5); low- and high-magnification SEM images of the heterogeneous nanostructures before and after peel test (Figure S6); SEM images of the fabricated well-aligned nanostructures with various shapes (Figure S7); Raman signal of the R6G molecule on the nine different points of the same substrate (Figure S8); results of long-term stability test for anti-counterfeiting applications (Figure S9) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18122/suppl_file/am0c18122_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Reshaping Strategy at Ultrahigh Strain Rates Enables Large‐Scale Fabrication of Sharp Nanostructures

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

One-step fabrication of metal nanostructures by high-throughput imprinting

Mechanical Reshaping of Inorganic Nanostructures with Weak Nanoscale Forces

Large-Scale Ultrafast Strain Engineering of CVD-Grown Two-Dimensional Materials on Strain Self-Limited Deformable Nanostructures toward Enhanced Field-Effect Transistors

Scalable, Green Fabrication of Single-Crystal Noble Metal Films and Nanostructures for Low-Loss Nanotechnology Applications

Nanoscale reshaping of resonant dielectric microstructures by light-driven explosions

Electron‐Beam‐Assisted Laser‐Induced Strain Microfabrication

Achieving ultra-large tensile strain in nanoscale Si mechanical metamaterials

Fabrication of Large-Area Nanostructures Using Cross-Nanoimprint Strategy

Highly efficient and controllable method to fabricate ultrafine metallic nanostructures

Fabrication of Ultrafine Nanostructures

Three Strategies to Achieve Uniform Tensile Deformation in A Nanostructured Metal

Rapid Fabrication of Complex Nanostructures Using Room-Temperature Ultrasonic Nanoimprinting.

Atomic-Scale Imprinting by Sputter Deposition of Amorphous Metallic Films

Fabrication Of Ultrafine Nanostructures With Single-Nanometre Precision In A High-Resolution Transmission Electron Microscope

Shape-Controlled and Well-Arrayed Heterogeneous Nanostructures via Melting Point Modulation at the Nanoscale

Wafer‐Scale Fabrication of 2D Nanostructures via Thermomechanical Nanomolding

Fabrication of Large Scale Nanostructures Based on a Modified Atomic Force Microscope Nanomechanical Machining System.

Ultrahigh Stress and Strain in Hierarchically Structured Hollow Nanoparticles.

Reducing Deformation Anisotropy to Achieve Ultrahigh Strength and Ductility in Mg at the Nanoscale.