Abstract:Objective Nanopatterned metal thin films are key functional elements of various nano-enabled devices for a variety of applications. However, the efficient fabrication of large-area micro-nano metal structures remains extremely challenging. In this study, a digital micromirror device is used to modulate the beam of a femtosecond laser into an arbitrary two-dimensional patterned beam, and the ions in the metal solution are reduced to nanoparticles and deposited onto the corresponding metal pattern using the projection of a patterned femtosecond laser. We succeed in the high-speed large-area deposition of gold and silver precious metals, where the processed structures exhibit excellent surface quality and optical properties. This processing method is fast, mild, widely used, and inexpensive, and provides a new means of conducting metal micro-nano patterned manufacturing. Methods A silver ion precursor solution is prepared by adding a suitable amount of aqueous ammonia to an aqueous mixture of silver nitrate (0.1 mol/L) and trisodium citrate (0.05 mol/L) under stirring until a clear solution is formed. The gold-ion precursor solution is prepared by an aqueous mixture of ionic liquid (2.1 mol/L) and tetrachloroauric acid (0.3 mol/L) under stirring until a clear solution is formed. The ionic liquid is prepared slightly differently from that previously reported. Specifically, an excess of glycine (73.2 mmol) is added to an aqueous solution of choline hydroxide (mass fraction of 46%,61 mmol), and the mixture is stirred at room temperature for 24 h. Water is then removed under vacuum at 50 oC. Acetonitrile (60 mL) and methanol (20 mL) are then added to precipitate the unreacted amino acids. The mixture is stirred vigorously overnight and filtered through a Celite filter. The solvents are evaporated under reduced pressure and, if necessary, the residue is redissolved in acetonitrile/methanol. Finally, the purified ionic liquid is dried under vacuum overnight at 60 degrees C and stored under moisture-free conditions until use. Results and Discussions Images are projected onto a commercially available digital micromirror device (DMD), which acts as a digital mask to pattern the femtosecond laser beam into dark and bright regions. Patterning is achieved by switching the individual micromirrors on the DMD to either on or off. Accordingly, the metal structures can be rapidly deposited (Fig.1). The deposition time required for the gold and silver materials and the thickness of the deposition structure are studied, and the maximum thicknesses of the silver and gold materials are 120 nm and 380 nm, respectively. The time required to reach the maximum thickness is different when the power is changed (Figs.3 and 4). It is found that gold and silver reach their shortest deposition time of 170 s and 26 s under 6 mW and 9 mW, respectively. Under a laser power of 3 mW, the pattern exhibits excellent optical properties and its surface is flat (Fig.6). Conclusions We present a projection-based photoreduction technique that can rapidly and photochemically deposit metal structures with smooth planes, solving the difficulty in depositing two-dimensional structures of precious metals with excellent surface quality at high speed. A femtosecond laser is innovatively used as a light source for deposition, making full use of its characteristics, where the power required for light reduction processing is greatly reduced. More specifically, the laser enables reduction of the excessive agglomeration of nanoparticles during deposition and improvement in surface quality. This photoreduction technique is not only simple to operate but also has wide applicability in the fields of microelectromechanical systems, wearable electronics, and bioscience.

One-step fabrication of metal nanostructures by high-throughput imprinting

Ultra-high Precision Nano Additive Manufacturing of Metal Oxide Semiconductors Via Multi-Photon Lithography

Multiple-Patterning Nanosphere Lithography for Fabricating Periodic Three-Dimensional Hierarchical Nanostructures.

Atomic-Scale Imprinting by Sputter Deposition of Amorphous Metallic Films

Bottom-up fabrication of highly ordered metal nanostructures by hierarchical self-assembly

Reshaping Strategy at Ultrahigh Strain Rates Enables Large‐Scale Fabrication of Sharp Nanostructures

Rapid Fabrication of Complex Nanostructures Using Room-Temperature Ultrasonic Nanoimprinting.

Scalable, Green Fabrication of Single-Crystal Noble Metal Films and Nanostructures for Low-Loss Nanotechnology Applications

Nanofabrication of highly ordered, tunable metallic mesostructures via quasi-hard-templating of lyotropic liquid crystals

Scalable Printing of Metal Nanostructures through Superluminescent Light Projection

Highly efficient and controllable method to fabricate ultrafine metallic nanostructures

Fabrication of Metal Nanoscale Devices on Insulating Membranes by High-Resolution Atom Ablation

Joint Process of Laser Shock Polishing and Imprinting for Metallic Nanostructure Fabrication

Wafer‐Scale Fabrication of 2D Nanostructures via Thermomechanical Nanomolding

Direct metal nano-imprinting using embossed solid electrolyte stamp

Fabrication of Metal Suspending Nanostructures by Nanoimprint Lithography (NIL) and Isotropic Reactive Ion Etching (RIE)

Facile Fabrication of Metallic Nanostructures by Tunable Cracking and Transfer Printing

Silver high-aspect-ratio micro- and nanoimprinting for optical applications

High-Temperature Imprinting and Superhydrophobicity of Micro/Nano Surface Structures on Metals Using Molds Fabricated by Ultrafast Laser Ablation

Single-crystal Metal Growth on Amorphous Insulating Substrates

Metal Micro-Nano Structures by Femtosecond Laser Projection Lithography (Invited)