Abstract:The multipurpose portable ultra-high-vacuum-compatible chamber described in detail in this article has been designed to carry out grazing-incidence X-ray scattering techniques on the BM25-SpLine CRG beamline at the ESRF. The chamber has a cylindrical form, built on a 360° beryllium double-ended conflate flange (CF) nipple. The main advantage of this chamber design is the wide sample temperature range, which may be varied between 60 and 1000 K. Other advantages of using a cylinder are that the wall thickness is reduced to a minimum value, keeping maximal solid angle accessibility and keeping wall absorption of the incoming X-ray beam constant. The heat exchanger is a customized compact liquid-nitrogen (LN2) continuous-flow cryostat. LN2 is transferred from a storage Dewar through a vacuum-isolated transfer line to the heat exchanger. The sample is mounted on a molybdenum support on the heat exchanger, which is equipped with a BORALECTRIC heater element. The chamber versatility extends to the operating pressure, ranging from ultra-high vacuum (<10(-10) mbar) to high pressure (up to 3 × 10(3) mbar). In addition, it is equipped with several CF ports to allocate auxiliary components such as capillary gas-inlet, viewports, leak valves, ion gun, turbo pump, etc., responding to a large variety of experiment requirements. A movable slits set-up has been foreseen to reduce the background and diffuse scattering produced at the beryllium wall. Diffraction data can be recorded either with a point detector or with a bi-dimensional CCD detector, or both detectors simultaneously. The system has been designed to carry out a multitude of experiments in a large variety of environments. The system feasibility is demonstrated by showing temperature-dependence grazing-incidence X-ray diffraction and conductivity measurements on a 20 nm-thick La0.7Ca0.3MnO3 thin film grown on a SrTiO3(001) substrate.

Thin film and surface preparation chamber for the low energy muons spectrometer

Improving the beam quality of the low-energy muon beamline at Paul Scherrer Institute: Characterization of ultrathin carbon foils

Improving the low-energy muon beam quality of the LEM beamline at PSI: Characterisation of ultra-thin carbon foils

Geant4 simulation of the PSI LEM beam line: energy loss and muonium formation in thin foils and the impact of unmoderated muons on the $μ$SR spectrometer

Combinatorial Laser Molecular Beam Epitaxy System Integrated with Specialized Low-temperature Scanning Tunneling Microscopy

201 MHz Cavity R&D for MUCOOL and MICE

An ultra-flexible modular high vacuum setup for thin film deposition

Construction and operation of a Double Phase LAr Large Electron Multiplier Time Projection Chamber

Sub-THz Characterization of Technical Surfaces for Particle Accelerator Vacuum Chambers

Operation of a double-phase pure argon Large Electron Multiplier Time Projection Chamber: comparison of single and double phase operation

First operation of a double phase LAr Large Electron Multiplier Time Projection Chamber with a two-dimensional projective readout anode

Microcalorimeter Absorber Optimization for ATHENA and LEM

A low-temperature scanning probe microscopy system with molecular beam epitaxy and optical access

Ultrahigh Vacuum Cryostat System for Extended Low-Temperature Space Environment Testing

Multi-use high/low-temperature and pressure compatible portable chamber for in situ grazing-incidence X-ray scattering studies

Ultra thin polymer foil cryogenic window for antiproton deceleration and storage

Development and performance of a sealed liquid xenon time projection chamber

Mass spectrometer controlled electron beam evaporation synthesis of multilayered materials

HIGH POWER RF TEST OF AN 805 MHZ RF CAVITY FOR A MUON COOLING CHANNEL

Ultrahigh Vacuum Packaging and Surface Cleaning for Quantum Devices

Long-term operation of a double phase LAr LEM Time Projection Chamber with a simplified anode and extraction-grid design