Extraction of Hydrogen from Water Using CeO2 in a Solar Reactor Using a Concentrated Flux of Solar Radiation

Ahmadov, Kh. S.

DOI: https://doi.org/10.3103/S0003701X22060032

2023-04-04

Applied Solar Energy (English translation of Geliotekhnika)

Abstract:In this article, the thermophysical parameters of a cylindrical reactor with inner radius R i = 32.5 mm, outer radius R o = 42.5 mm, and length L = 100 mm was evaluated, and the thermochemical process based on CeO 2 /CH 4 proceeding in it was considered. Various materials were considered for the construction of the reactor, and the most suitable one was chosen. In this case 304 stainless steel was selected for the reactor. It is determined that the values of heat transfer and heat return of the reactor depend on temperature. In this case, the thermal conductivity varies from 91.5 to 64.8 W/(m 2 K) at a temperature of 300–650 K and from 64.8 to 85 W/(m 2 K) at a temperature of 650–1400 K. It has been established that the value of heat transfer varies within 686.5–962.3 W/(m K) in the temperature range 300–1400 K. It is established that this reactor consumes energy from 17.5 to 70 kW, depending on the temperature change during operation. In the temperature range of 700–1400 K, the efficiency of absorption of solar radiation by the reactor decreases from 99.6 to 92.8%. The method of hydrogen production using CH 4 and CeO 2 thermochemical cycles was analyzed. Heat balance equations for endothermic and exothermic processes of the thermochemical cycle have been studied. It was determined that Q min = 373 kJ/mol and Q max = 400 kJ/mol and energy is required for this thermochemical process in the temperature range of 700–1400 K. In this case, the optimum for a good separation of hydrogen is a temperature in the range of 1000–1250 K. In this temperature range, the maximum separation of products occurs in a mixture of methane and cerium oxide.