Abstract:The conceptual design and engineering of an integrated catalytic reactor requires a thorough understanding of the prevailing mechanisms and phenomena to ensure a safe operation while achieving desirable efficiency and product yields. The necessity and importance of these requirements are demonstrated in this investigation in the case of novel membrane-assisted reactors tailored for CO2 hydrogenation. Firstly, a carbon molecular sieve membrane was developed for simultaneous separation of CO2 from a hot post-combustion CO2-rich stream, followed by directing it along a packed-bed of hybrid CuO-ZnO/ZSM5 catalysts to react with hydrogen and produce DiMethyl Ether (DME). The generated water is removed from the catalytic bed by permeation through the membrane which enables reaction equilibrium shift towards more CO2-conversion. Extra process intensification was achieved using a membrane-assisted reactive distillation reactor, where similarly several such parallel membranes were erected inside a catalytic bed to form a reactive-distillation column. This provides the opportunity for a synchronized separation of CO2 and water by a membrane, mixing the educts (i.e., hydrogen and CO2) and controlling the reaction along the catalytic bed while distilling the products (i.e., methanol, water and DME) through the catalyst loaded column. The hybrid catalyst and carbon molecular sieve membrane were developed using the synthesis methods and proved experimentally to be among the most efficient compared to the state-of-the-art. In this context, selective permeation of the membrane and selective catalytic conversion of hybrid catalysts under the targeted operating temperature range of 200–260 °C and 10–20 bar pressure were studied. For the membrane, the obtained high flux of selective CO2-permeation was beyond the Robeson upper bound. Moreover, in the hybrid catalytic structure, a combined methanol and DME yield of 15% was secured. Detailed results of catalyst and membrane synthesis and characterization along with catalyst test and membrane permeation tests are reported in this paper. The performance of various configurations of integrated catalytic and separation systems was studied through an experimentally supported simulation along with the systematic analysis of the conceptual design and operation of such reactive distillation. Focusing on the subnano-/micro-meter scale, the performance of sequential reactions while considering the interaction of the involved catalytic materials on the overall performance of the hybrid catalyst structure was studied. On the same scale, the mechanism of separation through membrane pores was analyzed. Moreover, looking at the micro-/milli-meter scale in the vicinity of the catalyst and membrane, the impacts of equilibrium shift and the in-situ separation of CO2 and steam were analyzed, respectively. Finally, at the macro-scale separation of components, the impacts of established temperature, pressure and concentration profiles along the reactive distillation column were analyzed. The desired characteristics of the integrated membrane reactor at different scales could be identified in this manner.

Numerical Modeling of CO2 Splitting in High-Temperature Solar-Driven Oxygen Permeation Membrane Reactors

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

Dynamic Behavior of High-Temperature CO2/H2O Co-Electrolysis Coupled with Real Fluctuating Renewable Power

Process optimization of CO2membrane and cryogenic hybrid separation

Thermochemical CO2 Splitting Enhanced by in Situ Oxygen Separation Through CeO2 and CaTiO3 Membranes

Thermochemical CO 2 Splitting Enhanced by In Situ Oxygen Separation through CeO 2 and CaTiO 3 Membranes

One-Step Thermochemical C <sub>2</sub> Splitting Enhanced by In-Situ Oxygen Separation Through CeO <sub>2</sub> and CaTiO <sub>3</sub> Membranes

Computational Fluid Dynamics Modelling of Hydrogen Production via Water Splitting in Oxygen Membrane Reactors

CFD Simulation of Hydrogen Generation and Methane Combustion Inside a Water Splitting Membrane Reactor

Unraveling Active Sites Regulation and Temperature-Dependent Thermodynamic Mechanism in Photothermocatalytic CO2 Conversion with H2O

Modeling of CO2 Mass Transport Across a Hollow Fiber Membrane Reactor Filled with Immobilized Enzyme

Combined Heat and Mass Transfer Analysis of Solar Reactor Integrating Porous Reacting Media for Water and Carbon Dioxide Splitting

Multiscale Analysis of Membrane-Assisted Integrated Reactors for CO2 Hydrogenation to Dimethyl Ether

Modeling of CO 2 /H 2 O Co-electrolysis using solar-driven SOEC coupled with ammonia-based chemical heat pump

A design of solar-driven thermochemical reactor integrated with heat recovery for continuous production of renewable fuels

Comprehensive Modeling of Tubular Solid Oxide Electrolysis Cell for Co-Electrolysis of Steam and Carbon Dioxide

Mathematical Modeling of High-Temperature Multiphase Solid/Molten Carbonate Membranes for CO 2 Capture

Modeling and Simulation of Water-Gas Shift Reactors with and without Membrane

Microstructural and Interfacial Designs of Oxygen‐Permeable Membranes for Oxygen Separation and Reaction–Separation Coupling

Solar Fuel Production at High Temperatures Using Ceria As a Dense Membrane

Modeling the mass transfer process in membranes for carbon capture and separation with concentration polarization effect