Abstract:CO2 splitting via thermo-chemical or reactive redox has emerged as a novel and promising carbon-neutral energy solution. Its performance depends critically on the properties of the oxygen carriers (OC). Ceria is recognized as one of the most promising OC candidates, because of its fast chemistry, high ionic diffusivity, and large oxygen storage capacity. The fundamental surface ion-incorporation pathways, along with the role of surface defects and the adsorbates remain largely unknown. This study presents a detailed kinetics study of CO2 splitting using CeO2 and Ce0.5Zr0.5O2 (CZO) in the temperature range 600-900 °C. Given our interest in fuel-assisted reduction, we limit our study to relatively lower temperatures to avoid excessive sintering and the need for high temperature heat. Compared to what has been reported previously, we observe higher splitting kinetics, resulting from the utilization of fine particles and well-controlled experiments which ensure a surface-limited-process. The peak rates with CZO are 85.9 μmole g-1 s-1 at 900 °C and 61.2 μmole g-1 s-1 at 700 °C, and those of CeO2 are 70.6 μmole g-1 s-1 and 28.9 μmole g-1 s-1. Kinetic models are developed to describe the ion incorporation dynamics, with consideration of CO2 activation and the charge transfer reactions. CO2 activation energy is found to be -120 kJ mole-1 for CZO, half of that for CeO2, while CO desorption energetics is analogous between the two samples with a value of ∼160 kJ mole-1. The charge-transfer process is found to be the rate-limiting step for CO2 splitting. The evolution of CO32- with surface Ce3+ is examined based on the modeled kinetics. We show that the concentration of CO32- varies with Ce3+ in a linear-flattened-decay pattern, resulting from a mismatch between the kinetics of the two reactions. Our study provides new insights into the significant role of surface defects and adsorbates in determining the splitting kinetics.

Thermochemical CO 2 Splitting Enhanced by In Situ Oxygen Separation through CeO 2 and CaTiO 3 Membranes

Thermochemical CO2 Splitting Enhanced by in Situ Oxygen Separation Through CeO2 and CaTiO3 Membranes

One-Step Thermochemical C <sub>2</sub> Splitting Enhanced by In-Situ Oxygen Separation Through CeO <sub>2</sub> and CaTiO <sub>3</sub> Membranes

Numerical Modeling of CO2 Splitting in High-Temperature Solar-Driven Oxygen Permeation Membrane Reactors

Tantalum stabilized SrCoO3-δ perovskite membrane for oxygen separation

Enhanced Intermediate-Temperature CO2 Splitting Using Non-Stoichiometric Ceria and Ceria-Zirconia

Boosted Solar Thermochemical Low‐temperature CO2 Splitting On Pt/CeO2 By Interface Catalysis

High Co2 Permeation Flux Enabled By Al(2)O(3) Modifier And In-Situ Infiltration Of Molten Carbonate Into Gd-Doped Ceo2 As A Co2 Separation Membrane

Improved Water Dissociation and Nitrous Oxide Decomposition by in Situ Oxygen Removal in Perovskite Catalytic Membrane Reactor

Syngas Production in a Novel Perovskite Membrane Reactor with Co-Feed of CO2

Stable oxygen permeable membrane with Ce0.9Gd0.1O2-δ protective layer for syngas production

Highly effective CO 2 splitting in a plasma-assisted membrane reactor

Platinum Group Metal Catalyst (RuOx, PtOx, and IrOx)-Decorated Ceria-Zirconia Solid Solution as High Active Oxygen Carriers for Solar Thermochemical CO2 Splitting

Platinum Group Metal Catalyst (RuO x , PtO x , and IrO x )-Decorated Ceria-Zirconia Solid Solution as High Active Oxygen Carriers for Solar Thermochemical CO 2 Splitting

Platinum Group Metal Catalyst (RuO<sub><i>x</i></sub>, PtO<sub><i>x</i></sub>, and IrO<sub><i>x</i></sub>)-Decorated Ceria-Zirconia Solid Solution as High Active Oxygen Carriers for Solar Thermochemical CO<sub>2</sub> Splitting

Simultaneous production of pure nitrogen and syngas in BaCe0.5Fe0.5O3-δ membrane reactor

CO2-stable Ce0.9Gd0.1O2−δ-perovskite Dual Phase Oxygen Separation Membranes and the Application in Partial Oxidation of Methane to Syngas

Two-step thermochemical looping using modified ceria-based materials for splitting CO2

Two-step Thermochemical Looping Using Modified Ceria-Based Materials for Splitting CO 2

Syngas Production via Oxidative Reforming of Propane Using a CO2- and O2-Permeating Membrane

Partial oxidation of ethane to syngas in an oxygen-permeable membrane reactor